69 + Interview Questions in Autocad Interview Questions in Autocad Tutorial

1.	The Setvar Command Is Used To?
Answer» CHANGE the VALUES of the SYSTEM VARIABLES change the values of the system variables

1.

The Setvar Command Is Used To?

Answer»

CHANGE the VALUES of the SYSTEM VARIABLES

change the values of the system variables

Discussion

2.	Which One Best Describes A "user Coordinate System"?
Answer» the PAIR of coordinate points which define the lower left and upper RIGHT CORNERS of the drawing boundary the pair of coordinate points which define the lower left and upper right corners of the drawing boundary

2.

Which One Best Describes A "user Coordinate System"?

Answer»

the PAIR of coordinate points which define the lower left and upper RIGHT CORNERS of the drawing boundary

the pair of coordinate points which define the lower left and upper right corners of the drawing boundary

Discussion

3.	To Continue Drawing A Line From The Last Known Point, Enter
Answer» (@) (@)

3.

To Continue Drawing A Line From The Last Known Point, Enter

Answer»

(@)

Discussion

4.	Which One Would Be An Autocad Drawing File?
Answer» PLAN.DWG PLAN.DWG

4.

Which One Would Be An Autocad Drawing File?

Answer»

PLAN.DWG

Discussion

5.	Which System Variables Controls The Accuracy Of Approximation Of A Spline Curve?
Answer» SPLINESEGS SPLINESEGS

5.

Which System Variables Controls The Accuracy Of Approximation Of A Spline Curve?

Answer»

SPLINESEGS

Discussion

6.	Which Statements Is True?
Answer» When a DRAWING is SAVED, a DWG file is CREATED and an existing DWG file of the existing name and location is renamed with the EXTENSION .bak. A backup file is one save older than the drawing file of the same name. To ensure that your BAK FILES are the same as the DWG file, always save twice. When a drawing is saved, a DWG file is created and an existing DWG file of the existing name and location is renamed with the extension .bak. A backup file is one save older than the drawing file of the same name. To ensure that your BAK files are the same as the DWG file, always save twice.

6.

Which Statements Is True?

Answer»

When a DRAWING is SAVED, a DWG file is CREATED and an existing DWG file of the existing name and location is renamed with the EXTENSION .bak. A backup file is one save older than the drawing file of the same name. To ensure that your BAK FILES are the same as the DWG file, always save twice.

When a drawing is saved, a DWG file is created and an existing DWG file of the existing name and location is renamed with the extension .bak. A backup file is one save older than the drawing file of the same name. To ensure that your BAK files are the same as the DWG file, always save twice.

Discussion

7.	One Effect Of Setting The Value Of Mirrtext=0 Is That?
Answer» TEXT is DISPLAYED but not MIRRORED text is displayed but not mirrored

7.

One Effect Of Setting The Value Of Mirrtext=0 Is That?

Answer»

TEXT is DISPLAYED but not MIRRORED

text is displayed but not mirrored

Discussion

8.	Autocad Has Had The Dreaded Model Space And Paper Space Since R12. What Is The Main Advantage Of The System?
Answer» it CONVERTS 2D DRAWINGS to 3D it converts 2D drawings to 3D

8.

Autocad Has Had The Dreaded Model Space And Paper Space Since R12. What Is The Main Advantage Of The System?

Answer»

it CONVERTS 2D DRAWINGS to 3D

it converts 2D drawings to 3D

Discussion

9.	Causes Attributes To Be Set To Their Defaults?
Answer» ATTDIA ATTDIA

9.

Causes Attributes To Be Set To Their Defaults?

Answer»

ATTDIA

Discussion

10.	The Effect Of Freezing A Layer Is To?
Answer» MAKE it INVISIBLE and PREVENT REGENERATION make it invisible and prevent regeneration

10.

The Effect Of Freezing A Layer Is To?

Answer»

MAKE it INVISIBLE and PREVENT REGENERATION

make it invisible and prevent regeneration

Discussion

11.	Which One Is A Correct Statement Regarding Autocad Blocks?
Answer» BLOCKS can only be INSERTED into a DRAWING if they ALREADY EXIST in that drawing. Blocks can only be inserted into a drawing if they already exist in that drawing.

11.

Which One Is A Correct Statement Regarding Autocad Blocks?

Answer»

BLOCKS can only be INSERTED into a DRAWING if they ALREADY EXIST in that drawing.

Blocks can only be inserted into a drawing if they already exist in that drawing.

Discussion

12.	Which One Is The Autocad Filename Extension Used To Indicate A Compiled Text Font?
Answer» TXT TXT

12.

Which One Is The Autocad Filename Extension Used To Indicate A Compiled Text Font?

Answer»

TXT

Discussion

13.	The Effect Of The Explode Command When Applied To A Block Is To?
Answer» REDUCE a block to it's CONSTITUENT ENTITIES to allow editing reduce a block to it's constituent entities to allow editing

13.

The Effect Of The Explode Command When Applied To A Block Is To?

Answer»

REDUCE a block to it's CONSTITUENT ENTITIES to allow editing

reduce a block to it's constituent entities to allow editing

Discussion

14.	The Maximum Number Of Commands Whose Effect Can Be Undone By The Undo Command Is?
Answer» all commands issued SINCE the DRAWING was LAST loaded into the drawing editor all commands issued since the drawing was last loaded into the drawing editor

14.

The Maximum Number Of Commands Whose Effect Can Be Undone By The Undo Command Is?

Answer»

all commands issued SINCE the DRAWING was LAST loaded into the drawing editor

all commands issued since the drawing was last loaded into the drawing editor

Discussion

15.	The "select Object" Option "previous" Is Best Described By
Answer» PICKS the PREVIOUSLY PICKED GROUP of OBJECTS Picks the previously picked group of objects

15.

The "select Object" Option "previous" Is Best Described By

Answer»

PICKS the PREVIOUSLY PICKED GROUP of OBJECTS

Picks the previously picked group of objects

Discussion

16.	Which Commands Will Not Place Some Form Of Text Within The Drawing?
Answer» STYLE STYLE

16.

Which Commands Will Not Place Some Form Of Text Within The Drawing?

Answer»

STYLE

Discussion

17.	A House Measures 15000 Mm X 8000 Mm In Plan View. When Drawing The Plan View Only Which One Sets Of Limits Would Be Best To Use?
Answer» 0,0/20000,15000 0,0/20000,15000

17.

A House Measures 15000 Mm X 8000 Mm In Plan View. When Drawing The Plan View Only Which One Sets Of Limits Would Be Best To Use?

Answer»

0,0/20000,15000

Discussion

18.	When Designing An Integrated Circuit Measuring 5 Mm X 5mm The Measurements Should Be Entered Using A Scale Of
Answer» 1:5 1:5

18.

When Designing An Integrated Circuit Measuring 5 Mm X 5mm The Measurements Should Be Entered Using A Scale Of

Answer»

1:5

Discussion

19.	The Shortcuts Or Command Alias That Allows Us To Key In L And Autocad Responds With Line Are Stored In A File Named
Answer» ACAD.PGP ACAD.PGP

19.

The Shortcuts Or Command Alias That Allows Us To Key In L And Autocad Responds With Line Are Stored In A File Named

Answer»

ACAD.PGP

Discussion

20.	Which One Commands Forces Autocad To Revise The Entire Drawing Taking Into Account The Effect Of Changes Within The System?
Answer» REGEN REGEN

20.

Which One Commands Forces Autocad To Revise The Entire Drawing Taking Into Account The Effect Of Changes Within The System?

Answer»

REGEN

Discussion

21.	If The System Variable Mirrtext Is Set To 1, Text Is?
Answer» Mirrored Mirrored

21.

If The System Variable Mirrtext Is Set To 1, Text Is?

Answer»

Mirrored

Discussion

22.	Which One Commands Can Be Used To Change The Value Of A System Variable?
Answer» SETVAR SETVAR

22.

Which One Commands Can Be Used To Change The Value Of A System Variable?

Answer»

SETVAR

Discussion

23.	Which One Is The Maximum Number Of Layers Which Can Be Defined In An Autocad Drawing?
Answer» 256 LAYERS 256 layers

23.

Which One Is The Maximum Number Of Layers Which Can Be Defined In An Autocad Drawing?

Answer»

256 LAYERS

256 layers

Discussion

24.	Which Statements Is True For Autocad?
Answer» ZOOM ALL makes all OBJECTS visible IRRESPECTIVE of the layer visibility STATE. ZOOM ALL makes all objects visible irrespective of the layer visibility state.

24.

Which Statements Is True For Autocad?

Answer»

ZOOM ALL makes all OBJECTS visible IRRESPECTIVE of the layer visibility STATE.

ZOOM ALL makes all objects visible irrespective of the layer visibility state.

Discussion

25.	The Command To Scale A Paper Space Viewport To Half The Drawn Size Is?
Answer» ZOOM 0.5x Zoom 0.5x

25.

The Command To Scale A Paper Space Viewport To Half The Drawn Size Is?

Answer»

ZOOM 0.5x

Zoom 0.5x

Discussion

26.	When Producing A Drawing Of A Site Plan Measuring 300m X 275m Dimensions Should Be Entered To A Scale Of?
Answer» 1:1000 1:1000

26.

When Producing A Drawing Of A Site Plan Measuring 300m X 275m Dimensions Should Be Entered To A Scale Of?

Answer»

1:1000

Discussion

27.	Which One Key Combinations Will Toggle Snap?
Answer» EITHER F9 or CONTROL and B Either F9 or CONTROL and B

27.

Which One Key Combinations Will Toggle Snap?

Answer»

EITHER F9 or CONTROL and B

Either F9 or CONTROL and B

Discussion

28.	Which One Commands Can Be Used To Turn The Grid Through 45 Degrees ?
Answer» UCS UCS

28.

Which One Commands Can Be Used To Turn The Grid Through 45 Degrees ?

Answer»

UCS

Discussion

29.	In Order For The Grid Command To Work Correctly Two Settings Have To Be Established?
Answer» Gridmode and osmode both SET to 1 Gridmode and osmode both set to 1

29.

In Order For The Grid Command To Work Correctly Two Settings Have To Be Established?

Answer»

Gridmode and osmode both SET to 1

Gridmode and osmode both set to 1

Discussion

30.	The Special Character String That Is Used To Print The Diameter Sign Is?
Answer» %%C %%c

30.

The Special Character String That Is Used To Print The Diameter Sign Is?

Answer»

%%C

%%c

Discussion

31.	When Is A Space Not Interpreted As The Enter Key?
Answer» The SPACE is ALWAYS an ALTERNATIVE to the ENTER KEY. The space is always an alternative to the enter key.

31.

When Is A Space Not Interpreted As The Enter Key?

Answer»

The SPACE is ALWAYS an ALTERNATIVE to the ENTER KEY.

The space is always an alternative to the enter key.

Discussion

32.	Which One Commands Allows Simultaneous Pan And Zoom?
Answer» ZOOM DYNAMIC ZOOM DYNAMIC

32.

Which One Commands Allows Simultaneous Pan And Zoom?

Answer»

ZOOM DYNAMIC

Discussion

33.	Which One Options Of The Undo Command Allows The Undo Facility To Be Disabled?
Answer» CONTROL CONTROL

33.

Which One Options Of The Undo Command Allows The Undo Facility To Be Disabled?

Answer»

CONTROL

Discussion

34.	When Using Autocad For The Design Of A Mechanical Component Measuring 1000 Mm By 500 Mm, The Dimensions Would Normally Be Entered At A Scale Of?
Answer» 1:10 in A4 SIZE DRAWING 1:10 in A4 size drawing

34.

When Using Autocad For The Design Of A Mechanical Component Measuring 1000 Mm By 500 Mm, The Dimensions Would Normally Be Entered At A Scale Of?

Answer»

1:10 in A4 SIZE DRAWING

1:10 in A4 size drawing

Discussion

35.	Which One Best Defines A "prototype" Or "template" Drawing?
Answer» a means of SETTING the initial DRAWING ENVIRONMENT for new drawings a means of setting the initial drawing environment for new drawings

35.

Which One Best Defines A "prototype" Or "template" Drawing?

Answer»

a means of SETTING the initial DRAWING ENVIRONMENT for new drawings

a means of setting the initial drawing environment for new drawings

Discussion

36.	Which Shapes Cannot Be Drawn By The Polygon Command?
Answer» rectangle rectangle

36.

Which Shapes Cannot Be Drawn By The Polygon Command?

Answer»

rectangle

Discussion

37.	How Many Entity Colours Does Autocad Support?
Answer» 255 255

37.

How Many Entity Colours Does Autocad Support?

Answer»

255

Discussion

38.	Which One Is An Autocad Relative Polar Coordinate?
Answer» 30&LT;81 30<81

38.

Which One Is An Autocad Relative Polar Coordinate?

Answer»

30&LT;81

30<81

Discussion

39.	The Special Character String That Causes Text To Be Underlined Is?
Answer» %%U %%u

39.

The Special Character String That Causes Text To Be Underlined Is?

Answer»

%%U

%%u

Discussion

40.	Which One Key Combinations Will Toggle Coords?
Answer» EITHER F6 or CONTROL and D Either F6 or CONTROL and D

40.

Which One Key Combinations Will Toggle Coords?

Answer»

EITHER F6 or CONTROL and D

Either F6 or CONTROL and D

Discussion

41.	Which Is An Autocad Font For Mathematical Symbols?
Answer» MATHC MATHC

41.

Which Is An Autocad Font For Mathematical Symbols?

Answer»

MATHC

Discussion

42.	The Effect Of Qtext Being On Is To?
Answer» SPEED up drawing REGENERATION by REPLACING TEXT with rectangles speed up drawing regeneration by replacing text with rectangles

42.

The Effect Of Qtext Being On Is To?

Answer»

SPEED up drawing REGENERATION by REPLACING TEXT with rectangles

speed up drawing regeneration by replacing text with rectangles

Discussion

43.	Which Key Combinations Issues The Isoplane Command?
Answer» CONTROL and E or F5 CONTROL and E or F5

43.

Which Key Combinations Issues The Isoplane Command?

Answer»

CONTROL and E or F5

Discussion

44.	Describe Procedure To Create User Interface?
Answer» Command prompts are used to sketch dialog boxes and plots to create user interface. The dialog boxes display is seen by making USE of some external COMMANDS or PLOT command. Set CMDDIA to 1 takes place that allows dialog boxes to run command and enter use spaces. The CREATION of user interface NEEDS the command line to show complete file so that it can be edited or customized very easily.

44.

Describe Procedure To Create User Interface?

Answer»

Command prompts are used to sketch dialog boxes and plots to create user interface.
The dialog boxes display is seen by making USE of some external COMMANDS or PLOT command.
Set CMDDIA to 1 takes place that allows dialog boxes to run command and enter use spaces.
The CREATION of user interface NEEDS the command line to show complete file so that it can be edited or customized very easily.

Discussion

45.	Give Features Involved In Autocad Ws?
Answer» A platform that offers Mobile Apps to be DEVELOPED by giving some options to view, share and edit is AutoCAD Applications can be easily shared by user when they go on fly and the applications can be developed in less time. APPLICATION are downloaded and installed from different places that need license for all the applications developed for mobiles. FILES can be saved by the user according to their desire and that application can be run on any different platform. The application BASED on AutoCAD offer best way to let information shared by the user on cloud and use technology to improve features.

45.

Give Features Involved In Autocad Ws?

Answer»

A platform that offers Mobile Apps to be DEVELOPED by giving some options to view, share and edit is AutoCAD
Applications can be easily shared by user when they go on fly and the applications can be developed in less time.
APPLICATION are downloaded and installed from different places that need license for all the applications developed for mobiles.
FILES can be saved by the user according to their desire and that application can be run on any different platform.
The application BASED on AutoCAD offer best way to let information shared by the user on cloud and use technology to improve features.

Discussion

46.	Give The Variants Usage In Autocad?
Answer» Multiple variants are USED by AutoCAD that include releases offering abilities to create an application. The 3D ability offered by AutoCAD provides few rises to the application releases. Variations are increased by variants that are in the application or the package used in SPECIFIC program. AutoCAD offers variants that help in formation, visualizing and depicting 3D models that offer even 3D printing. Variants offer best METHOD to make USE of various functionalities of function and evaluate it according to the requirements.

46.

Give The Variants Usage In Autocad?

Answer»

Multiple variants are USED by AutoCAD that include releases offering abilities to create an application.
The 3D ability offered by AutoCAD provides few rises to the application releases.
Variations are increased by variants that are in the application or the package used in SPECIFIC program.
AutoCAD offers variants that help in formation, visualizing and depicting 3D models that offer even 3D printing.
Variants offer best METHOD to make USE of various functionalities of function and evaluate it according to the requirements.

Discussion

47.	What File Formats Are Used In Design?
Answer» There is NATIVE format USE such as .dwg for AutoCAD and it offers format that can be exchanged. The format of FILE that can be exchanged has DXF extension and it offers data operability. dwg format is included in AutoCAD and give the support. It gives a method to use active files. It gives a way to approximate total file having extension .dwg that is created in association with other files. It offers languages that are used and software localization part can be changed to meet the needs.

47.

What File Formats Are Used In Design?

Answer»

There is NATIVE format USE such as .dwg for AutoCAD and it offers format that can be exchanged.
The format of FILE that can be exchanged has DXF extension and it offers data operability.
dwg format is included in AutoCAD and give the support. It gives a method to use active files.
It gives a way to approximate total file having extension .dwg that is created in association with other files.
It offers languages that are used and software localization part can be changed to meet the needs.

Discussion

48.	What Is The Main Reason For Using Autocad?
Answer» Mainly, AUTOCAD is responsible for developing designs that are computer aided or some software application that contain drafting. Application can be DEVELOPED in 2D and 3D formats USING AutoCAD and offer information to application. Some specific tools are offered by AutoCAD to develop software USED in the market, project management and architectures. It offers BEST way to develop software with designs and build it according to the requirement.

48.

What Is The Main Reason For Using Autocad?

Answer»

Mainly, AUTOCAD is responsible for developing designs that are computer aided or some software application that contain drafting.
Application can be DEVELOPED in 2D and 3D formats USING AutoCAD and offer information to application.
Some specific tools are offered by AutoCAD to develop software USED in the market, project management and architectures.
It offers BEST way to develop software with designs and build it according to the requirement.

Discussion

49.	Give Autocad Uses?
Answer» AutoCAD software is responsible for designing and drawing the documents and applications with simple customization options. A platform is OFFERED by AutoCAD for PROFESSIONALS to generate attractive designs and some 3D models. It permits conceptual designs and qualified technical drawings formation that is effectively used for LOGICAL representations. It permits drafter to offer designing and FINISHING by connecting to online information. It offers operational experts or suppliers to evaluate drawings and change it according to the necessity.

49.

Give Autocad Uses?

Answer»

AutoCAD software is responsible for designing and drawing the documents and applications with simple customization options.
A platform is OFFERED by AutoCAD for PROFESSIONALS to generate attractive designs and some 3D models.
It permits conceptual designs and qualified technical drawings formation that is effectively used for LOGICAL representations.
It permits drafter to offer designing and FINISHING by connecting to online information.
It offers operational experts or suppliers to evaluate drawings and change it according to the necessity.

Discussion

50.	Why Autocad Software Is Used?
Answer» The shape and design of the PRODUCTS that is required to be created is offered by AutoCAD software. This software offers FEATURES that are user friendly and very flexible with some SPECIFIC tools to develop applications and the workflow is documented. Aggregating and importing models is involved in it and most commonly permits to develop design without making any CHANGES in the original model. It offer some specific tools to present formats by designing layouts in detail and views can be used in drawings automatically. ALSO, it has some specifications to develop detail design layouts and automatically views are drawn by making use of original model.

50.

Why Autocad Software Is Used?

Answer»

The shape and design of the PRODUCTS that is required to be created is offered by AutoCAD software.
This software offers FEATURES that are user friendly and very flexible with some SPECIFIC tools to develop applications and the workflow is documented.
Aggregating and importing models is involved in it and most commonly permits to develop design without making any CHANGES in the original model.
It offer some specific tools to present formats by designing layouts in detail and views can be used in drawings automatically.
ALSO, it has some specifications to develop detail design layouts and automatically views are drawn by making use of original model.

Discussion

Explore topic-wise InterviewSolutions in Current Affairs.

The Setvar Command Is Used To?

Which One Best Describes A "user Coordinate System"?

To Continue Drawing A Line From The Last Known Point, Enter

Which One Would Be An Autocad Drawing File?

Which System Variables Controls The Accuracy Of Approximation Of A Spline Curve?

Which Statements Is True?

One Effect Of Setting The Value Of Mirrtext=0 Is That?

Autocad Has Had The Dreaded Model Space And Paper Space Since R12. What Is The Main Advantage Of The System?

Causes Attributes To Be Set To Their Defaults?

The Effect Of Freezing A Layer Is To?

Which One Is A Correct Statement Regarding Autocad Blocks?

Which One Is The Autocad Filename Extension Used To Indicate A Compiled Text Font?

The Effect Of The Explode Command When Applied To A Block Is To?

The Maximum Number Of Commands Whose Effect Can Be Undone By The Undo Command Is?

The "select Object" Option "previous" Is Best Described By

Which Commands Will Not Place Some Form Of Text Within The Drawing?

A House Measures 15000 Mm X 8000 Mm In Plan View. When Drawing The Plan View Only Which One Sets Of Limits Would Be Best To Use?

When Designing An Integrated Circuit Measuring 5 Mm X 5mm The Measurements Should Be Entered Using A Scale Of

The Shortcuts Or Command Alias That Allows Us To Key In L And Autocad Responds With Line Are Stored In A File Named

Which One Commands Forces Autocad To Revise The Entire Drawing Taking Into Account The Effect Of Changes Within The System?

If The System Variable Mirrtext Is Set To 1, Text Is?

Which One Commands Can Be Used To Change The Value Of A System Variable?

Which One Is The Maximum Number Of Layers Which Can Be Defined In An Autocad Drawing?

Which Statements Is True For Autocad?

The Command To Scale A Paper Space Viewport To Half The Drawn Size Is?

When Producing A Drawing Of A Site Plan Measuring 300m X 275m Dimensions Should Be Entered To A Scale Of?

Which One Key Combinations Will Toggle Snap?

Which One Commands Can Be Used To Turn The Grid Through 45 Degrees ?

In Order For The Grid Command To Work Correctly Two Settings Have To Be Established?

The Special Character String That Is Used To Print The Diameter Sign Is?

When Is A Space Not Interpreted As The Enter Key?

Which One Commands Allows Simultaneous Pan And Zoom?

Which One Options Of The Undo Command Allows The Undo Facility To Be Disabled?

When Using Autocad For The Design Of A Mechanical Component Measuring 1000 Mm By 500 Mm, The Dimensions Would Normally Be Entered At A Scale Of?

Which One Best Defines A "prototype" Or "template" Drawing?

Which Shapes Cannot Be Drawn By The Polygon Command?

How Many Entity Colours Does Autocad Support?

Which One Is An Autocad Relative Polar Coordinate?

The Special Character String That Causes Text To Be Underlined Is?

Which One Key Combinations Will Toggle Coords?

Which Is An Autocad Font For Mathematical Symbols?

The Effect Of Qtext Being On Is To?

Which Key Combinations Issues The Isoplane Command?

Describe Procedure To Create User Interface?

Give Features Involved In Autocad Ws?

Give The Variants Usage In Autocad?

What File Formats Are Used In Design?

What Is The Main Reason For Using Autocad?

Give Autocad Uses?

Why Autocad Software Is Used?