Explore topic-wise InterviewSolutions in .

Solid COMBINE is ALTERNATIVE OPTION for INTERSECTION Boolean OPERATION. 

Solid Combine is alternative option for Intersection Boolean operation. 

After inserting a new body If you USE Negative FEATURE as fist feature in a body the polarity of the body will be negative. Negative features like Pocket, GROOVE, SLOT HOLE etc. 

After inserting a new body If you use Negative feature as fist feature in a body the polarity of the body will be negative. Negative features like Pocket, Groove, Slot Hole etc. 

The color CODE for these elements is GREEN. White and MAGENTA RESPECTIVELY. 

The color code for these elements is Green. White and Magenta respectively. 

THREE DIMENSIONS are required namely MAJOR axis, MINOR axis and the distance from the origin. 

Three dimensions are required namely major axis, minor axis and the distance from the origin. 

Parabola has RHO VALUES of 0.5, ELLIPSE has RHO VALUE between 0 & 0.5 and HYPERBOLA has RHO value b/w 0.5 & 1.0. 

Parabola has RHO values of 0.5, Ellipse has RHO value between 0 & 0.5 and Hyperbola has RHO value b/w 0.5 & 1.0. 

AXIS is USED in CREATING shaft (revolved) feature. 

Axis is used in creating shaft (revolved) feature. 

To check whether the SKETCH is FULLY closed or not so that the sketch can be used or not so that the sketch can be used for further OPERATIONS in PART design.

To check whether the sketch is fully closed or not so that the sketch can be used or not so that the sketch can be used for further operations in part design.

YES. 

Yes. 

We can CONVERT LINE into AXIS but axis cannot convert into line. 

We can convert line into axis but axis cannot convert into line. 

Only one axis can be created in a sketch, if more than one axis are drawn then only one of them, the LATEST one, will be axis and others will be CONVERTED into REFERENCE ELEMENTS. 

Only one axis can be created in a sketch, if more than one axis are drawn then only one of them, the latest one, will be axis and others will be converted into reference elements. 

RIGHT click on the sketch whose REFERENCE plane is to be CHANGED and SELECT the change reference plane and then select new reference. 

Right click on the sketch whose reference plane is to be changed and select the change reference plane and then select new reference. 

EXPLORE and the relation b/w the ORIGINAL and MIRROR element doesnt EXIT. 

Explore and the relation b/w the original and mirror element doesnt exit. 

Isolated is USED when 3D geometry is PROJECTED on to a sketch in order to be modified and used as PART of the sketch’s profile. 

Isolated is used when 3D geometry is projected on to a sketch in order to be modified and used as part of the sketch’s profile. 

No, we cannot SELECT a non-planar SURFACE as SKETCH. 

No, we cannot select a non-planar surface as sketch. 

• BREAK & RUBBER in REMOVES part of the element, which is CLICKED. 
• BREAK & RUBBER out removes part of the element, which is not clicked. 
• BREAK & KEEP keeps both PARTS of ELEMENTS after breaking. 

PI, P2 and P3 will INDICATE the different types of PLATFORMS of CATIA. HIGHER the number sophisticated will be the software. 

Pi, P2 and P3 will indicate the different types of platforms of CATIA. Higher the number sophisticated will be the software. 

The KERNEL is the basic indispensable PART of an operating SYSTEM that allocates resources such as low- level HARDWARE INTERFACES & security. 

The kernel is the basic indispensable part of an operating system that allocates resources such as low- level hardware interfaces & security. 

CNEXT 

CNEXT 

No, we cannot ENTER DIRECTLY into the PART DESIGN. 

No, we cannot enter directly into the part design. 

This tool bar only APPEARS when you are in sketcher WORKBENCH. The four tools FOUND in this tool bar are toggle tools. When tool is HIGHLIGHTED the tool is on. This particular tool bar changes depending on what other sketcher workbench tool is currently selected. 

This tool bar only appears when you are in sketcher workbench. The four tools found in this tool bar are toggle tools. When tool is highlighted the tool is on. This particular tool bar changes depending on what other sketcher workbench tool is currently selected. 

Degree of FREEDOM for POINTS & ellipse is 2 for CIRCLES it is 3 & for ellipse it is 5 in two dimensions. 

Degree of freedom for points & ellipse is 2 for circles it is 3 & for ellipse it is 5 in two dimensions. 

MEAN DIMENSION is the dimension that should be mern of all the DIMENSIONS, which are TOLERANCE. 

Mean dimension is the dimension that should be mern of all the dimensions, which are tolerance. 

Yes, ou can create a block USING LINE, when you are extruding a line or any open profile you can check thick option in Pad FEATURE (to avoid ERROR MESSAGE). You can Give limit one, Limit Two and Thickness one and two. You will get Block from line and thin sheet from any open profile. 

Note: Dont use this option to create a sheet metal part using part design. 

Yes, ou can create a block using line, when you are extruding a line or any open profile you can check thick option in Pad feature (to avoid Error message). You can Give limit one, Limit Two and Thickness one and two. You will get Block from line and thin sheet from any open profile. 

Note: Dont use this option to create a sheet metal part using part design. 

IGES/igs, STEP fstp, STL, WRL, ETC 

IGES/igs, STEP fstp, STL, WRL, etc 

FILE EXTENSION of PART file is DOT CATPart (.CATPart) 

File Extension of Part file is dot CATPart (.CATPart) 

If all of the degrees of freedom of GEOMETRY have been takes up by a CONSISTENT COMBINATION of dimensions & fixed geometry,. That geometry is SAID to be ISO-CONSTRAINED. Geometry that still has some degrees of freedom is said to be UNDER constrained.

If all of the degrees of freedom of geometry have been takes up by a consistent combination of dimensions & fixed geometry,. That geometry is said to be ISO-CONSTRAINED. Geometry that still has some degrees of freedom is said to be UNDER constrained.

TRUE DIMENSION is the dimension desired after the machining. In other WORDS, this is the value that should be attained after the machining. 

True dimension is the dimension desired after the machining. In other words, this is the value that should be attained after the machining. 

We can measure arc length by using MEASURE ITEM COMMAND. Sometimes we need to customize the option for arc length if it is not CHECKED EARLIER using customization in MEASURE ITEM command. 

We can measure arc length by using MEASURE ITEM command. Sometimes we need to customize the option for arc length if it is not checked earlier using customization in MEASURE ITEM command. 

This TASK SHOWS how to make some edges visible. In other words, we are GOING to simplify the sketch plane by HIDING the portion of the material that is not needed for sketching. 

This task shows how to make some edges visible. In other words, we are going to simplify the sketch plane by hiding the portion of the material that is not needed for sketching. 

Show mode ENABLE us to see all the COMPONENTS presently OPENED and in Hide mode we can hide the desired elements from the view for TIME being. 

Show mode enable us to see all the components presently opened and in Hide mode we can hide the desired elements from the view for time being. 

YES, with help of F3 button, but the option in TOOLS conunand MUST be CHECKED to allow this. 

Yes, with help of F3 button, but the option in Tools conunand must be checked to allow this. 

SKETCH TOOLS in sketcher workbench are the commands, which find very use in CREATING sketches. SKETCH TOOLS are namely GEOMETRIC and dimensional CONSTRAINTS, construction elements/standard elements and Grid option. They play very IMPORTANT role in sketching, whenever we want to constrain a sketch we use these options and if we want to convert any element into a construction element once again these options come into picture.

SKETCH TOOLS in sketcher workbench are the commands, which find very use in creating sketches. SKETCH TOOLS are namely geometric and dimensional constraints, construction elements/standard elements and Grid option. They play very important role in sketching, whenever we want to constrain a sketch we use these options and if we want to convert any element into a construction element once again these options come into picture.

MM, KG, SECOND. 

mm, Kg, Second. 

CONSTRUCTION ELEMENTS assist in sketching the REQUIRED PROFILE in sketcher.

Construction elements assist in sketching the required profile in sketcher.

EXIT Sketcher. 

Exit Sketcher. 

No, it is not possible to ENTER in to sketcher WORKBENCH DIRECTLY. We have to GO for any workbench &form there we can enter the sketcher workbench.. 

No, it is not possible to enter in to sketcher workbench directly. We have to go for any workbench &form there we can enter the sketcher workbench.. 

YES, GO for Tools-Options- Infrastructure-Part structure-Display.

Yes, go for Tools-Options- Infrastructure-Part structure-Display.

YES 

Yes 

CAT PART 

CAT Part 

COMPUTER Aided Three Dimensional INTERACTIVE Application. 

Computer Aided Three Dimensional Interactive Application.