Explore topic-wise InterviewSolutions in .

This section includes InterviewSolutions, each offering curated multiple-choice questions to sharpen your knowledge and support exam preparation. Choose a topic below to get started.

101.

A series RLC circuit consists of a 10Ω resistor in series with L=20μH and C=100μF. The new value of L for which the resonant frequecy is one half of the original value.

Answer»

A series RLC circuit consists of a 10Ω resistor in series with L=20μH and C=100μF. The new value of L for which the resonant frequecy is one half of the original value.


102.

Determine the corner frequency (fc) in Hz, for the below given high pass filter.318.4

Answer» Determine the corner frequency (fc) in Hz, for the below given high pass filter.




  1. 318.4
103.

Two identical coils of negligible resistance when connected in series across a 200V,50Hz source draws a current of 10A. When the terminals of one of the coils are reversed, then current drawn is 8A. The coefficient of coupling between the two coils is0.11

Answer» Two identical coils of negligible resistance when connected in series across a 200V,50Hz source draws a current of 10A. When the terminals of one of the coils are reversed, then current drawn is 8A. The coefficient of coupling between the two coils is
  1. 0.11
104.

Find the voltage Vxy across the 3Ω resistor

Answer»

Find the voltage Vxy across the 3Ω resistor


105.

A periodic waveform f(t)=(2−3cos10t)2V is given.Its rms value will be

Answer»

A periodic waveform f(t)=(23cos10t)2V is given.

Its rms value will be

106.

The power delivered by the current source, in the figure, is____.3

Answer» The power delivered by the current source, in the figure, is____.




  1. 3
107.

The ABCD parameters of the following 2-port network are

Answer»

The ABCD parameters of the following 2-port network are




108.

Two identical coupled inductors are connected in series. The measured inductances for the two possible series connections are 380μH and 240μH. Their mutual inductance in μH is35

Answer»

Two identical coupled inductors are connected in series. The measured inductances for the two possible series connections are 380μH and 240μH. Their mutual inductance in μH is



  1. 35
109.

In the circuit shown below, the current through the PMMC meter is assumed to be zero. The ideal switch toggles between position 1 and position 2. For each position, it is connected for time T/2. Assume R4Cx<<T/2 and R2Cx>>T/2The capacitor Cx can be charged up to the maximum voltage

Answer»

In the circuit shown below, the current through the PMMC meter is assumed to be zero. The ideal switch toggles between position 1 and position 2. For each position, it is connected for time T/2. Assume R4Cx<<T/2 and R2Cx>>T/2



The capacitor Cx can be charged up to the maximum voltage

110.

In the circuit shown, the switch S is open for a long time and is closed at t = 0. The current i(t) for t≥0+ is

Answer»

In the circuit shown, the switch S is open for a long time and is closed at t = 0. The current i(t) for t0+ is


111.

The number of chords in the graph of the given circuit will be

Answer»

The number of chords in the graph of the given circuit will be


112.

The switch has been in position 1 for a long time and abruptly changes to position 2 at t = 0.If time t is in seconds, the capacitor voltage VC (in volts) for t &gt; 0 is given by

Answer»

The switch has been in position 1 for a long time and abruptly changes to position 2 at t = 0.



If time t is in seconds, the capacitor voltage VC (in volts) for t > 0 is given by

113.

In the circuit shown in the figure, the value of capacitor C (in mF) needed to have critically damped response i(t) is10

Answer»

In the circuit shown in the figure, the value of capacitor C (in mF) needed to have critically damped response i(t) is

https://df0b18phdhzpx.cloudfront.net/ckeditor_assets/pictures/1157899/original_27.png





  1. 10
114.

When one port of a two port network is open circuited, V1=4V2 and I2=0.25V2 then, which of the following is correct?

Answer»

When one port of a two port network is open circuited, V1=4V2 and I2=0.25V2 then, which of the following is correct?