Explore topic-wise InterviewSolutions in .

It is the GRAND COULEE DAM.

Burj KHALIFA stands the tallest in the world with the length of 828m. It CONTAINS 163 FLOORS.

• Construction of bridge, pillars, and beams, etc.
• Used to TEST the DEFORMATION PROPERTY of the new materials
• iMeasure the stress-strain relationship
• Calculates and measures the deformation response of the materials especially under working LOADS and WEIGHT

• LOSS of economy
• Material wastage
• Homeless with a loss of COUNTLESS property
• Unhealthy ENVIRONMENT

The SIZE of a standard room is CONSIDERED to be 10*10 feet.

• Asphalt SHINGLES
• Laminated Asphalt Shingles
• Asphalt Roll Roofing
• Rubber Membrane Roofing
• Cedar Shingles or Shakes
• Living Roofs
• Solar Tiles

Read more CIVIL Engineering Interview Questions and crack the interview with EASE.

E strength is 3.5 N/mm2 so, of the flyash brick woulIt is three times greater than the normal brick made with clay, i.e. the value of the normal clay brick’s compressivd be 10-12N/mm2.

• Right-click the DIMENSION on the drawing sheet.
• Select Edit from the menu.
• The dimension value is represented by <<&GT;> in the Edit Dimension DIALOG box.
• Click on the HIDE Dimension Value check box and enter the dimension of the string to be displayed.
• Close the dialog box by clicking OK.
• The text to be entered in the string now replaces the dimension value.

• FIXED price or lump sum contracts- In this contract, the buyer agrees to PAY a fixed amount and then the contractor agrees on that. There are no changes made in the amount and some allowances which gives the buyer some sort of certainty in it.
• Time and material contracts- Here time is the major factor which derives all the contract and decides the MONEY. Material and time spent by the builder along with his SUBCONTRACTORS. It is not certain as time, and the cost of the materials keep on changing.
• Cost plus contracts- Actual construction cost is paid to the contractor along with a set percentage of an amount for constructing a building. There are several ways involved here such as the addition of cost with a fixed fee.

• SHEAR SLUMP
• True Slump
• Collapse slump

(One of the easiest CIVIL ENGINEERING INTERVIEW questions.)

• Planning of all the WORK to be done on the project
• Make the decisions as required
• Organization and PREPARATION of the list of the work
• Consider safety and health regulations along with the other legislation
• Traveling between the sites for client MEETINGS

Bleeding, in CIVIL engineering, is a PROCESS and STATE of mixing WATER in the CONCRETE in which the concrete rises above the material’s surface.

The measurement is done after the curing PROCESS has taken place for 7 days or 28 days. The load should be applied slowly at the rate of 140 kg/cm2 per MINUTE until the Specimens FAILS. We get the compressive strength of the concrete or the CEMENT at the load FAILURE divided by the specimen’s area.

The cement’s strength is TESTED on hardened Cement-Sand mortar’s cubes, and these are PREPARED out of the cement which has a strength of 53MPa. It is derived from 53 Grade OPC Cement GIVING 28-days of COMPRESSIVE strength of the cement. It is one of the most common civil ENGINEERING interview questions.

Minimum length of a CRANK is 300 mm.

The formula of Crank length = (D1+d2+5) *10mm where d1 is the diameter of smaller bar and d2 is the diameter of the LARGEST bar.

Also, the slope of the crank is 1:10 (one of the common CIVIL engineering interview questions.)

The FORMULA for CALCULATING the WEIGHT of steel-Example

7.85×length (m)×width (m)×thickness (MM)

Per cubic meter, the unit weight of steel is 7850 kgs. In pounds per cubic FOOT, it is 489.8 pounds. It totally depends on the exact COMPOSITION of the steel as it is an alloy of carbon and IRON.

To find the weight of the concrete, multiply the length, HEIGHT, and width of the area where the concrete is to be filled. Then you will GET the volume of the place or the volume of the concrete to be used. To get the weight of the concrete in POUNDS, multiply the volume which we have GOT in cubic feet by 143.38 pounds/feet^3.

AutoCAD and 3D Max are the most popular SOFTWARE used in CIVIL ENGINEERING. These are helpful in making various high-tech PRESENTATIONS, REPORTS, billing purposes. All the designs, modeling, design, architectural drawing, Auto-desk 2D and 3D designs can be successfully made with the help of this two software.

• Construction Engineering
• Coastal Engineering
• Civil Engineering Systems
• Environmental Engineering
• Geotechnical Engineering
• Surveying
• Water Resources Engineering
• Structural Engineering
• Earthquake Engineering
• Forensic Engineering
• Urban or Municipal Engineering
• Transportation Engineering
• Materials Science and Engineering

Give an ACCURATE answer to the above civil engineering interview QUESTION and SCORE high.

Civil Engineering is dealing with CONSTRUCTION, DESIGN, and maintenance of the environment be it natural or built by them. It is a professional discipline of engineering which focuses on constructing airports, BRIDGES, dams and airports, structural components. There are many more on the list such as railways, roads, etc.

There are various sub-disciplines of civil engineering and TAKES the second place in the list of the age of engineering, at FIRST place comes military engineering.