Explore topic-wise InterviewSolutions in Current Affairs.

• Seam pucker
• Broken or OPEN STITCH
• Staggered stitch
• Slipped or SKIPPED stitch
• Vertical stitch density.

WITHOUT m:L we can not determine the required amount of dyes, chemicals and water during dyeing, WASHING and other wet PROCESSING. That’s why m:l is important.

Without m:l we can not determine the required amount of dyes, chemicals and water during dyeing, washing and other wet processing. That’s why m:l is important.

• Time
• TEMPERATURE
• Mechanical ABRASION
• CHEMICAL ACTION

When GOODS are made for buyer but not possible to SHIPPING as a RESULT goods are stain at STORE. This goods are called stock LOT.

When goods are made for buyer but not possible to shipping as a result goods are stain at store. This goods are called stock lot.

TAP = Total acceptable product in a lot

AQL = Acceptable quality limit.

TAP = Total acceptable product in a lot

AQL = Acceptable quality limit.

OE ZIPPER = OPEN end zipper - use in jacket

CE zipper = closed end zipper - use in baggage.

OE zipper = open end zipper - use in jacket

CE zipper = closed end zipper - use in baggage.

Quality is the DIFFERENCE between the products or It is the goodness or BADNESS in a PRODUCT or the feather of a product which satisfy customers or END USERS.

Quality is the difference between the products or It is the goodness or badness in a product or the feather of a product which satisfy customers or end users.

DUCK CHEST FEATHERS.

Duck chest feathers.

• OVERCOATS,
• JACKETS,
• PILLOW,
• BLANKET ETC.

Time start from L/C opening or ORDER receive to garments delivery is called LEAD time. 

Lead time — local MARKET = 45 DAYS

FOREIGN market = 90-120 days

Time start from L/C opening or order receive to garments delivery is called lead time. 

Lead time — local market = 45 days

Foreign market = 90-120 days

THREE types- 

• REGULAR(Bleach WASH)
• Irregular(Acid wash)
• Local(p.p.spray, p.p.sponge)

Three types- 

THREE process of fading mechanism – 

• Chemical action.
• MECHANICAL action
• BIOLOGICAL action.

Three process of fading mechanism – 

THREE types –

1.  yarn DYED
2.  SOLID dyed(s/d)
3.  DENIM

Three types –

There are mainly THREE TYPES of label 

• Main label, 
• Size label, 
• Care label.

The all other of label are CALLED sub label. 

There are mainly three types of label 

The all other of label are called sub label. 

STEAM IRONS.

Steam irons.

• NEEDLE
• Throat PLATE
• PRESSER foot
• Feed dogs
• Sewing thread and FABRIC.

The PROCESS of JOINING of FABRIC by the use of needle and SEWING THREAD is called sewing.

The process of joining of fabric by the use of needle and sewing thread is called sewing.

The garment which is NEEDED for BULK PRODUCTION is called sample garment.

The garment which is needed for bulk production is called sample garment.

By USING a RESIN coating of thermoplastic MATERIALS on a piece of FABRIC.

By using a resin coating of thermoplastic materials on a piece of fabric.

The interlining which is ATTACHING to the GARMENTS component by the application of temperature and PRESSURE is called fusible interlining.

The interlining which is attaching to the garments component by the application of temperature and pressure is called fusible interlining.

(A) Manual method 

• SCISSOR
• Round KNIFE
• BAND knife
• Straight knife
• Die cutting
• Notcher & -Drill

(B) Computerized method 

• Straight knife cutting
• Water JET cutting
• Laser BEAM cutting
• Plasma torch cutting

(A) Manual method 

(B) Computerized method 

To CUT the cloth ACCORDING to marker of PATTERNS for SEWING.

To cut the cloth according to marker of patterns for sewing.

To spread CLOTH as DETERMINED by needed quantity as PER marking/ the SMOOTH laying out of fabric in superimposed layer of specified length.

To spread cloth as determined by needed quantity as per marking/ the smooth laying out of fabric in superimposed layer of specified length.

• Warm SHIRT,
• Long sleeve,
• Waistband,
• Pull on over HEAD.

All types of GARMENTS can be divided MAINLY TWO GROUPS:

1. Tops part,
2. BOTTOM part.

All types of garments can be divided mainly two groups:

The size of garments can be EXPRESSED by TWO methods:

1. Alphabetical expression ex: S,M,L,XL,XXL
2. Numerical expression ex: 38,39,40,41,42(in CM or in inch)

The size of garments can be expressed by two methods:

 MARKER EFFICIENCY= TOTAL area of pattern pieces in a marker/total area of marker × 100%

 Marker efficiency= total area of pattern pieces in a marker/total area of marker × 100%

The garments which are used for ONE TIME only CALLED disposable garments.

ex: Medical garments.

The garments which are used for one time only called disposable garments.

ex: Medical garments.

C.B.L= CENTER BACK LINE, C.F.L= center FRONT line

C.B.L= center back line, C.F.L= center front line

A PARTICULAR TYPE of STITCH which is not visible from the face side of the GARMENTS.

A particular type of stitch which is not visible from the face side of the garments.

We continue SEWING for several TIMES within a very short distance to increase the load or STRENGTH of that particular portion which is termed as bar taking.e.g- edge of pocket, belt loop, FLY piece ETC.

We continue sewing for several times within a very short distance to increase the load or strength of that particular portion which is termed as bar taking.e.g- edge of pocket, belt loop, Fly piece etc.

During sewing we NEED to start or END it prior to 1CM or after 1cm RESPECTIVELY to secure the sewing end. This is termed as back TACKING.

During sewing we need to start or end it prior to 1cm or after 1cm respectively to secure the sewing end. This is termed as back tacking.

L/C MEANS LETTER of credit. It is ONE kind of agreement between buyer and SELLER.

L/C means letter of credit. It is one kind of agreement between buyer and seller.

It INDICATES the COARSENESS or FINENESS of a SEWING THREAD.

It indicates the coarseness or fineness of a sewing thread.

Beside fabric the COMPONENTS which are needed to MAKE a complete GARMENTS TERMED as trimmings.
EX: Button, sewing thread, lining, interning etc.

Beside fabric the components which are needed to make a complete garments termed as trimmings.
EX: Button, sewing thread, lining, interning etc.

The LINE of SEWING of one or more than one layers of FABRIC/the line of JOINING of fabric.

The line of sewing of one or more than one layers of fabric/the line of joining of fabric.

The UNIT of SEWING or SEAM.

The unit of sewing or seam.

A layer of fabric which is USED in the INNER side of GARMENTS to INCREASE the comfort-ability of the garments which is called lining.e.g. suits, COATS, ladies and babies wear.

A layer of fabric which is used in the inner side of garments to increase the comfort-ability of the garments which is called lining.e.g. suits, coats, ladies and babies wear.

• Sewable INTERLINING,
• FUSIBLE interlining.

A layer of fabric which is used between two layer of fabric to GIVE the particular AREA DESIRED shape and to enhance the STRENGTH of that particular position which is CALLED interlining. e.g. collar, cuff.

A layer of fabric which is used between two layer of fabric to give the particular area desired shape and to enhance the strength of that particular position which is called interlining. e.g. collar, cuff.

In CASE of garments MAKING some additional measurements are added with standard body measurement which is termed as allowances. This allowances is 1CM or 1inch.

there are two types of ALLOWANCE-

1.  Trimming allowance.
2.  SEWING allowances.

In case of garments making some additional measurements are added with standard body measurement which is termed as allowances. This allowances is 1cm or 1inch.

there are two types of allowance-

The manufacturers produce several numbers of samples following the APPROVED SAMPLE which is known as COUNTER samples. They FACILITY the bulk production or hung on production floor.

The manufacturers produce several numbers of samples following the approved sample which is known as counter samples. They facility the bulk production or hung on production floor.

In garments export and IMPORT BUSINESS a definite TYPE of garments is specified by a definite NUMBER which is CALLED category.

In garments export and import business a definite type of garments is specified by a definite number which is called category.

It is the line, which is marked on the patterns of a garment and the line indicates the WARP yarn, as a result, when the pattern is PLACED in the marking PAPER then the Grain line follow the warp yarn of fabric.

It is the line, which is marked on the patterns of a garment and the line indicates the warp yarn, as a result, when the pattern is placed in the marking paper then the Grain line follow the warp yarn of fabric.

By ARROW MARK.

By arrow mark.

It is one kind of DOCUMENTS which CONTAINS the information about selling ITEMS. Normally there are two TYPES of invoice- 

Proforma invoice- preliminary,

Commercial invoice-finally.

It is one kind of documents which contains the information about selling items. Normally there are two types of invoice- 

Proforma invoice- preliminary,

Commercial invoice-finally.

These are made on the basic of block pattern or basic block. Each block pattern is drawn or SKETCHED on the hard paper board with the help of pencil.

Then the following allowances and positions are ADDED:

• SEWING allowance
• Trimming allowance
• CBL
• CFL
• Button ATTACHING position
• Button holing position
• Plate etc.

These are made on the basic of block pattern or basic block. Each block pattern is drawn or sketched on the hard paper board with the help of pencil.

Then the following allowances and positions are added:

• To make a set of TEMPLATES of different components of GARMENTS.
• To make a LARGE amount of production at a TIME.
• To minimize WASTAGE and cost of garments.

Block patterns are the main or basic patterns which are constructed with definite and standard body MEASUREMENT, but they do not possess any STYLE or EXTRA attractiveness or any type of ALLOWANCES.

Block patterns are the main or basic patterns which are constructed with definite and standard body measurement, but they do not possess any style or extra attractiveness or any type of allowances.

In clothing industry DESIGN means determining the SHAPE and CUTTING PATTERNS of garments according to it.

In clothing industry design means determining the shape and cutting patterns of garments according to it.