Explore topic-wise InterviewSolutions in .

The RSLogix™ FAMILY of IEC-1131-compliant ladder logic PROGRAMMING packages HELPS you maximize performance, SAVE project development TIME, and improve productivity.

The RSLogix™ family of IEC-1131-compliant ladder logic programming packages helps you maximize performance, save project development time, and improve productivity.

Allen–Bradley is the brand-name of a line of FACTORY AUTOMATION Equipment MANUFACTURED by Rockwell Automation (NYSE ROK).

Allen–Bradley is the brand-name of a line of Factory Automation Equipment manufactured by Rockwell Automation (NYSE ROK).

The protocols are distinguished with following specifications

• No. of NODES SUPPORTED, total NETWORK LENGTH, Speed of communication.

The protocols are distinguished with following specifications

The DELAY time between the end of one communication and the START of another. During this time, the processes ASSOCIATED with the communication are hung up and cannot continue. The latency has to be minimum.

The delay time between the end of one communication and the start of another. During this time, the processes associated with the communication are hung up and cannot continue. The latency has to be minimum.

Data Highway: The proprietary data network used by Allen Bradley PLCs to communicate information to and from other PLCs on the network or to and from host computers attached to the network.

Control NET: A real-TIME, control-layer network providing high-speed transport of both time- critical IO data and messaging data, including upload/download of programming and configuration data and peer-to-peer messaging, on a single physical media link

Device Net: A low-cost communication link that connects industrial devices to a network. It is based on broadcast-oriented communication protocol – the Controller Area Network (CAN).

Ethernet: The standard for local COMMUNICATIONS networks developed jointly by Digital Equipment Corp., Xerox, and Intel. Ethernet BASEBAND coaxial cable transmits data at speeds up to 10 megabits per SECOND. Ethernet is used as the underlying transport vehicle by several upper-level protocols, including TCP/IP.

Data Highway: The proprietary data network used by Allen Bradley PLCs to communicate information to and from other PLCs on the network or to and from host computers attached to the network.

Control Net: A real-time, control-layer network providing high-speed transport of both time- critical IO data and messaging data, including upload/download of programming and configuration data and peer-to-peer messaging, on a single physical media link

Device Net: A low-cost communication link that connects industrial devices to a network. It is based on broadcast-oriented communication protocol – the Controller Area Network (CAN).

Ethernet: The standard for local communications networks developed jointly by Digital Equipment Corp., Xerox, and Intel. Ethernet baseband coaxial cable transmits data at speeds up to 10 megabits per second. Ethernet is used as the underlying transport vehicle by several upper-level protocols, including TCP/IP.

The commonly USED COMMUNICATION protocol in AB includes DH+, DH485, ETH, MODBUS, Device NET and Control Net.

The commonly used communication protocol in AB includes DH+, DH485, ETH, Modbus, Device Net and Control Net.

UPLOAD means TRANSFERRING the program DATA from PLC to PC.

Download means transferring the program data from PC to PLC.

Upload means transferring the program data from PLC to PC.

Download means transferring the program data from PC to PLC.

The RS Linux SOFTWARE is used for linking the PLC and software EITHER you can manually configuration the COMMUNICATION settings or By using Auto Configure facility the software will detect the communication settings automatically.

The RS Linux software is used for linking the PLC and software Either you can manually configuration the communication settings or By using Auto Configure facility the software will detect the communication settings automatically.

RS Logix is PLC programming software. It CONTAINS all the INSTRUCTIONS needed for PLC programming. We can develop the PROGRAM, down load / upload the program, work on line / off line and FORCE the I/Os using the software.

• RS Logix 500 is used for Micrologix and SLCs
• RS Logix 5000 is used for Control Logix PLCS

RS Logix is PLC programming software. It contains all the instructions needed for PLC programming. We can develop the program, down load / upload the program, work on line / off line and force the I/Os using the software.

RS Linux software is used to perform following TASKS:

• Configure communication DRIVERS
• View CONFIGURED drivers and active nodes
• Enable communication tasks such as uploading, downloading, going online, updating firmware and sending messages.

RS Linux software is used to perform following tasks:

• For PICO soft for Pico PLC programming
• RS Logix 500 for Micrologix and SLC PLCS programming
• RSLogix 5000 for Controllogix PLCs programming
• SCADA – RS View EARLIER Control View

• Pico: NON MODULAR SMALL PLCs
• Micrologix 1000, 1200 and 1500 SERIES
• SLC: SLC 5/01, 5/02, 5/03 ….
• Control Logix Flex Logic and Soft PLC