Explore topic-wise InterviewSolutions in .

Connect the USB of the speaker to a POWERED USB port. (Via USB port or PC/Laptop or DC 5V adapter)Plug the Micro USB to the CONTROLLER & the other end of the micro USB cable to a Powered USB port. (Via USB port or PC/Laptop or DC 5V adapter)

• Plug in the 3.5mm jack of the speaker to the controller.
• Insert a Pendrive/SD card to the controller
• The Controller will detect the Pendrive/SD card & start playing the AVAILABLE audio content in the pendrive/SD card.

Connect the USB of the speaker to a Powered USB port. (Via USB port or PC/Laptop or DC 5V adapter)Plug the Micro USB to the controller & the other end of the micro USB cable to a Powered USB port. (Via USB port or PC/Laptop or DC 5V adapter)

Connect the USB of the speaker to a Powered USB PORT. (Via USB port or PC/Laptop or DC 5V adapter)plug the Micro USB to the controller & the other end of the micro USB cable to a Powered USB port. (Via USB port or PC/Laptop or DC 5V adapter)

• Plug in the 3.5mm jack of the speaker to the controller.
• When the controller is in FM mode,Press the Play/Pause button once to SCAN the available FM channels.
• Once the SCANNING is done, the speaker will start playing the first channel. To change the channels use the next/previous buttons on the controller.

Connect the USB of the speaker to a Powered USB port. (Via USB port or PC/Laptop or DC 5V adapter)plug the Micro USB to the controller & the other end of the micro USB cable to a Powered USB port. (Via USB port or PC/Laptop or DC 5V adapter)

Connect the USB of the speaker to a Powered USB port. (Via USB port or PC/Laptop or DC 5V ADAPTER)Plug the Micro USB to the controller & the other END of the micro USB cable to a Powered USB port. (Via USB port or PC/Laptop or DC 5V adapter).

• Plug in the 3.5mm jack of the speaker to the controller.
• When the controller is in BT MODE, search for NEARBY devices in your mobile.
• TAP the name "ZEB-MELLOW " and connect it. (Password - 0000, if prompted).

Connect the USB of the speaker to a Powered USB port. (Via USB port or PC/Laptop or DC 5V adapter)Plug the Micro USB to the controller & the other end of the micro USB cable to a Powered USB port. (Via USB port or PC/Laptop or DC 5V adapter).

With the HELP of the controller, Mellow can be FUNCTION in various other MODES. (i.e Bluetooth,FM,USB & SD modes).

With the help of the controller, Mellow can be function in various other modes. (i.e Bluetooth,FM,USB & SD modes).

CONNECT the USB of the speaker to a Powered USB PORT. (VIA USB port or PC/Laptop or DC 5V adapter) Plug the 3.5mm jack to the audio SOURCE.

Connect the USB of the speaker to a Powered USB port. (Via USB port or PC/Laptop or DC 5V adapter) Plug the 3.5mm jack to the audio source.

CONNECT one end of the 3.5mm jack CABLE to the audio source Connect the other ENDS (Other end SPLITS to two 3.5mm jack) of the cable to both the SPEAKERS.

Connect one end of the 3.5mm jack cable to the audio source Connect the other ends (Other end splits to two 3.5mm jack) of the cable to both the speakers.

Disconnect the L & R connection of the speakers (If both the speakers are connected to each other) by long PRESSING the Play/Pause key of any one SPEAKER. Sound NOTIFICATION is prompted once successfully disconnected. Now both the speakers can be connected INDIVIDUALLY to TWO different devices.

Disconnect the L & R connection of the speakers (If both the speakers are connected to each other) by long pressing the Play/Pause key of any one speaker. Sound notification is prompted once successfully disconnected. Now both the speakers can be connected individually to two different devices.

Once both the SPEAKERS are CONNECTED to each other with the help of the above STEP, Scan and discover “ZEB-JIVE” SPEAKER on your device. Tap on “ZEB-JIVE” to connect (Password-0000, If prompted).

Once both the speakers are connected to each other with the help of the above step, Scan and discover “ZEB-JIVE” speaker on your device. Tap on “ZEB-JIVE” to connect (Password-0000, If prompted).

Turn ON both the JIVE speaker & Press and hold the Play/Pause KEY of any ONE speaker to pair both the speaker together. Sound notification is prompted once SUCCESSFULLY connected. Both the speakers can also be disconnected by LONG press the Play/Pause key of any one speaker again.

Turn ON both the JIVE speaker & Press and hold the Play/Pause key of any one speaker to pair both the speaker together. Sound notification is prompted once successfully connected. Both the speakers can also be disconnected by long press the Play/Pause key of any one speaker again.

Once a USB/Micro SD card is INSERTED into the speaker, it will DETECT the USB/Micro SD card automatically and start PLAYING SONGS from it.

Once a USB/Micro SD card is inserted into the speaker, it will detect the USB/Micro SD card automatically and start playing songs from it.

1. Switch the speaker to FM mode.
2. connect the AUX cable to the AUX port of the speaker and LEAVE the other end free (this cable will ACT as an FM ANTENNA).
3. Press and hold the Play/Pause button to start scanning for FM channels.
4. Once the scanning is done, the speaker will start playing from FIRST saved channel.
5. To change the channels you can use +/- buttons.

BT Wireless/Micro SD card/USB/FM/AUX.

BT Wireless/Micro SD card/USB/FM/AUX.

Once a USB/mSD card is INSERTED into the speaker, it will detect the USB/mSD card AUTOMATICALLY START PLAYING the songs from it.

Once a USB/mSD card is inserted into the speaker, it will detect the USB/mSD card automatically start playing the songs from it.

PRESS "-/+" to decrease/increase the VOLUME LEVEL RESPECTIVELY.

Press "-/+" to decrease/increase the volume level respectively.

Red LED GLOWING - CHARGING

Red LED TURNS OFF - Fully charged.

Red LED glowing - Charging

Red LED turns OFF - Fully charged.

1. Switch the SPEAKER to FM mode.
2. Connect the AUX cable to the AUX port of the speaker and leave the other end free (this cable will act as an FM antenna).
3. PRESS the Play/Pause button once to start scanning the FM channels.
4. once the scanning is done, the speaker will start playing from first saved channel.
5. To change the channels you can use Next/Previous BUTTONS.

BT Wireless/Micro SD/USB/FM /AUX MODE.

BT Wireless/Micro SD/USB/FM /AUX mode.

When the speaker is in WIRELESS mode, search for NEARBY BT DEVICES in your mobile. Tap the NAME "ZEB-PUNCH" and connect it.(Password - 0000, if prompted).

When the speaker is in wireless mode, search for nearby BT devices in your mobile. Tap the name "ZEB-PUNCH" and connect it.(Password - 0000, if prompted).

This mode used for voice capture, you can KEEP transmitter in MONITOR mode on one desk and can hear voice through headphone up to distance of 10m (Without any interruption)

1.  Turn on transmitter and headphone
2.  Set transmitter on monitor mode
3.  No more CONNECTION REQUIRED (Cable free)
4.  Receive transmitter signal on headphone by pressing scan BUTTON.

This mode used for voice capture, you can keep transmitter in monitor mode on one desk and can hear voice through headphone up to distance of 10m (Without any interruption)

Please use the bundled AUX CABLE (3.5mm on one side and TWO RCA female on another side) and CONNECT RCA end with transmitter and connect 3.5mm (Stereo) end to the device you wish to connect.

Please use the bundled AUX cable (3.5mm on one side and two RCA female on another side) and connect RCA end with transmitter and connect 3.5mm (Stereo) end to the device you wish to connect.

Headphone - On the left side of headphone is having the battery socket, please SLICE down the dark brown color cap to open and locate battery. Requires TWO AAA batteries.

Transmitter - On transmitter battery socket located in bottom of the UNIT. Requires AAA batteries.

Headphone - On the left side of headphone is having the battery socket, please slice down the dark brown color cap to open and locate battery. Requires two AAA batteries.

Transmitter - On transmitter battery socket located in bottom of the unit. Requires AAA batteries.

1. Turn on the device using power and volume button.
2. PRESS reset button once.
3. Press scan button once.
4. AVAILABLE RANGE FM channel will be scanned and saved AUTOMATICALLY.
5. After scanning, pressing the scan button will allow you to change FM channels.

PRESS "FN" + "RIGHT ARROW KEY".

Press "FN" + "Right arrow key".

Yes, below is the detailed guide for the same

1. Press twice "FN" + "~", the Keyboard will enter into configuring mode. (NUM LOCK, CAPS LOCK & SCROLL LOCK LED will blink continuously.)
2. Now press "FN"+ "RIGHT KEY", to change the SELECTED color. The backlit colors will change in following order - 1.Red 2.Orange 3.Yellow 4.Green 5.light blue 6.Blue 7.Violet 8. White 9. Off.The selected backlit color will be visible in "~" key.
3. To SAVE the configured mode, press "FN" + "~" key once again.
4. This custom color backlit will be saved EVEN when keyboard is disconnected, you can select this custom color backlit by pressing "FN" + "~" key once.

Yes, below is the detailed guide for the same

PRESS "FN" + "WINDOWS keys" - to lock the WINDOWS key FUNCTION, press again to UNLOCK. 

Press "FN" + "Windows keys" - to lock the WINDOWS key function, press again to unlock. 

Press "FN" + "LEFT/Right arrow KEY" - to MOVE the led LIGHT from Left to right or Right to left.

Press "FN" + "Left/Right arrow key" - to move the led light from Left to right or Right to left.

1. Press "FN" + "-" - to Decrease the blinking/animation SPEED of LED
2. Press "FN" + "+" - to INCREASE the blinking/animation speed of LED.

PRESS "FN" + "Up/down arrow key" - to CHANGE the LED BRIGHTNESS adjustment.

Press "FN" + "Up/down arrow key" - to change the LED brightness adjustment.

Yes, PRESS twice "FN+END", the Keyboard will enter into configuring MODE. (NUM LOCK, CAPS LOCK & SCROLL LOCK LED will blink CONTINUOUSLY.)

Press the keys for which you want the LEDs ON/OFF. Once you have done, Press "FN+END" again to exit this mode.

Yes, Press twice "FN+END", the Keyboard will enter into configuring mode. (NUM LOCK, CAPS LOCK & SCROLL LOCK LED will blink continuously.)

Press the keys for which you want the LEDs ON/OFF. Once you have done, Press "FN+END" again to exit this mode.

Press "FN" + "INS" - 4modes. ( Modes can be SWITCHED by pressing this combination again.)

Press "FN" + "HM" - 4modes. (Modes can be switched by pressing this combination again.)

Press "FN" + "PU" - 4modes. (Modes can be switched by pressing this combination again.)

Press "FN" + "DEL" - 4modes. (Modes can be switched by pressing this combination again.)

Press "FN" + "PD" - 4modes. (Modes can be switched by pressing this combination again.)

Press "FN" + "END" - 1modes.

Press "FN" + "INS" - 4modes. ( Modes can be switched by pressing this combination again.)

Press "FN" + "HM" - 4modes. (Modes can be switched by pressing this combination again.)

Press "FN" + "PU" - 4modes. (Modes can be switched by pressing this combination again.)

Press "FN" + "DEL" - 4modes. (Modes can be switched by pressing this combination again.)

Press "FN" + "PD" - 4modes. (Modes can be switched by pressing this combination again.)

Press "FN" + "END" - 1modes.

1.  Press and HOLD scroll button and right click button.
2.  Insert battery when you LEAVE the hold off scroll and right click (Releasing the keys and INSERTING the battery must be on the same TIME without any delay)
3.  When you complete step 2 mouse will start blinking on that time please insert dongle in to USB slot.

If BATTERY is weak this MIGHT happen, please REPLACE your battery with new one. You can use combo DEVICE WITHIN 9M.

If battery is weak this might happen, please replace your battery with new one. You can use combo device within 9M.

The product MIGHT require a fresh synchronization, please follow the below steps.

MOUSE – When you INSERT a battery in mouse it will start with red color LED blinking and get off in 2-3 seconds, please press and hold scroll button and right click button for 2-3 sec when green LED starts blinking , please release the buttons and insert the dongle in USB port.

KEYBOARD – When you insert a battery on keyboard slot green LED in front will start BLINK for 1-3 sec and stops, LATER please press connect button while you INSERTING dongle with a long green color LED blink it will start pairing with the dongle.

The product might require a fresh synchronization, please follow the below steps.

MOUSE – When you insert a battery in mouse it will start with red color LED blinking and get off in 2-3 seconds, please press and hold scroll button and right click button for 2-3 sec when green LED starts blinking , please release the buttons and insert the dongle in USB port.

KEYBOARD – When you insert a battery on keyboard slot green LED in front will start blink for 1-3 sec and stops, later please press connect button while you inserting dongle with a long green color LED blink it will start pairing with the dongle.

As far keyboard as concern ON/OFF switch not present but you can WAKE up keyboard by pressing num lock when it is in SLEEP mode.

MOUSE has an inbuilt ON/OFF switch, which is present in BACK side of the mouse.

As far keyboard as concern ON/OFF switch not present but you can wake up keyboard by pressing num lock when it is in sleep mode.

Mouse has an inbuilt ON/OFF switch, which is present in back side of the mouse.