Can A Nexus 7000 Be A Dhcp Server And Can It Relay Dhcp Requests To D – InterviewSolution

InterviewSolution

1.

Can A Nexus 7000 Be A Dhcp Server And Can It Relay Dhcp Requests To Different Dhcp Servers Per Vlan?

Answer»

The Nexus 7000 does not support a DHCP server, but it does support DHCP relay. For relay, USE the ip dhcp relay ADDRESS x.x.x.x interface COMMAND.

The Nexus 7000 does not support a DHCP server, but it does support DHCP relay. For relay, use the ip dhcp relay address x.x.x.x interface command.

Discussion

No Comment Found

Related InterviewSolutions

What Does The %oc_usd-slot18-2-rf_crc: Oc2 Received Packets With Crc Error From Mod 6 Through Xbar Slot 5/inst 1 Error Message Mean?
During Nexus 7010 Upgrade From 5.2.1 To 5.2.3 Code, The X-bar Module In Slot 4 Keeps Powering Off. The %module-2-xbar_diag_fail: Xbar 4 Reported Failure Due To Module Asic(s) Reported Sync Loss (deverr Is Linknum). Trying To Resync In Device 88 (device Error 0x0) Error Message Is Received.?
Is There A Best Practice For Port-channel Load Balancing Between Nexus 1000v Series And Nexus 7000 Series Switches?
How Do I Implement Vtp In A Nexus 7000 Series Switch Where Vlans Are Manually Configured?
How Do I Verify If Xl Mode Is Enabled On A Nexus 7000 Device?
Can A Nexus 7000 Be A Dhcp Server And Can It Relay Dhcp Requests To Different Dhcp Servers Per Vlan?
On A Nexus 7000 Running Nx-os 5.1(3), Can The Decnet Be Bridged On A Vlan?
How Do I Enable/disable Logging Link Status Per Port Basis On A Nexus 7000 Series Switch?
How Can I Avoid Receiving The "configuration Does Not Match The Port Capability" Error Message When Enabling "switchport Mode Fex-fabric"?
How Do I Avoid Receiving The "failed To Process Kickstart Image. Pre-upgrade Check Failed" Error Message When Upgrading The Image On A Nexus 7000 Series Switch?