How Do I Implement Vtp In A Nexus 7000 Series Switch Where Vlans Are

1.	How Do I Implement Vtp In A Nexus 7000 Series Switch Where Vlans Are Manually Configured?
Answer» Cisco does not recommend running VTP in DATA centers. If someone ATTACHES a switch to the network with a higher revision number without changing the VTP mode from the server, it will override the VLAN configuration on the switch. Cisco does not recommend running VTP in data centers. If someone attaches a switch to the network with a higher revision number without changing the VTP mode from the server, it will override the VLAN configuration on the switch.

How Do I Implement Vtp In A Nexus 7000 Series Switch Where Vlans Are Manually Configured?

Answer»

Cisco does not recommend running VTP in DATA centers. If someone ATTACHES a switch to the network with a higher revision number without changing the VTP mode from the server, it will override the VLAN configuration on the switch.

Cisco does not recommend running VTP in data centers. If someone attaches a switch to the network with a higher revision number without changing the VTP mode from the server, it will override the VLAN configuration on the switch.

Discussion

No Comment Found

Related InterviewSolutions

What Does The %oc_usd-slot18-2-rf_crc: Oc2 Received Packets With Crc Error From Mod 6 Through Xbar Slot 5/inst 1 Error Message Mean?
During Nexus 7010 Upgrade From 5.2.1 To 5.2.3 Code, The X-bar Module In Slot 4 Keeps Powering Off. The %module-2-xbar_diag_fail: Xbar 4 Reported Failure Due To Module Asic(s) Reported Sync Loss (deverr Is Linknum). Trying To Resync In Device 88 (device Error 0x0) Error Message Is Received.?
Is There A Best Practice For Port-channel Load Balancing Between Nexus 1000v Series And Nexus 7000 Series Switches?
How Do I Implement Vtp In A Nexus 7000 Series Switch Where Vlans Are Manually Configured?
How Do I Verify If Xl Mode Is Enabled On A Nexus 7000 Device?
Can A Nexus 7000 Be A Dhcp Server And Can It Relay Dhcp Requests To Different Dhcp Servers Per Vlan?
On A Nexus 7000 Running Nx-os 5.1(3), Can The Decnet Be Bridged On A Vlan?
How Do I Enable/disable Logging Link Status Per Port Basis On A Nexus 7000 Series Switch?
How Can I Avoid Receiving The "configuration Does Not Match The Port Capability" Error Message When Enabling "switchport Mode Fex-fabric"?
How Do I Avoid Receiving The "failed To Process Kickstart Image. Pre-upgrade Check Failed" Error Message When Upgrading The Image On A Nexus 7000 Series Switch?

How Do I Implement Vtp In A Nexus 7000 Series Switch Where Vlans Are Manually Configured?

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment