Find the true statement.(a) Length of the phasor must be greater than the peak value of alternating voltage or alternating current(b) When the current reaches its maximum value after emf becomes maximum, then the current is considered to be leading ahead of emf(c) When the emf reaches its maximum value after current becomes maximum, then the emf is considered to be behind the current(d) Phasors for voltage and current are in the same direction when the phase angle between voltage and current is zeroI had been asked this question during an interview.I need to ask this question from Representation of AC Current and Voltage by Rotating Vectors topic in section Alternating Current of Physics – Class 12

Find the true statement.(a) Length of the phasor must be greater than

1.	Find the true statement.(a) Length of the phasor must be greater than the peak value of alternating voltage or alternating current(b) When the current reaches its maximum value after emf becomes maximum, then the current is considered to be leading ahead of emf(c) When the emf reaches its maximum value after current becomes maximum, then the emf is considered to be behind the current(d) Phasors for voltage and current are in the same direction when the phase angle between voltage and current is zeroI had been asked this question during an interview.I need to ask this question from Representation of AC Current and Voltage by Rotating Vectors topic in section Alternating Current of Physics – Class 12
Answer» The correct choice is (d) PHASORS for VOLTAGE and current are in the same direction when the phase angle between voltage and current is zero The best I can explain: The phasors for voltage and current are in the same direction at all times when the phase angle between voltage and current is zero. All the other statements are not valid. Length of the phasor MUST be equal to the peak VALUE of alternating voltage or alternating current. Also, when the current reaches its MAXIMUM value after emf becomes maximum, then the current is considered to be lagging behind the emf and when the emf reaches its maximum value after current becomes maximum, then the emf is considered to lead the current.

Discussion

No Comment Found

Related InterviewSolutions

A transformer has an efficiency of 60% and works at 5kW. If the secondary voltage is 150 V, then what is the secondary current?(a) 10 A(b) 20 A(c) 30 A(d) 40 AI have been asked this question in an international level competition.This intriguing question comes from Alternating Current in section Alternating Current of Physics – Class 12
A capacitor, resistor of 10 Ω, and an inductor of 70 mH are in series with an ac source marked 120 V, 70 Hz. If it is found that voltage is in phase with the current, then find out the impedance of the circuit.(a) 5 Ω(b) 10 Ω(c) 100 Ω(d) 900 ΩThis question was addressed to me in an interview.My doubt stems from AC Voltage Applied to a Series LCR Circuit in chapter Alternating Current of Physics – Class 12
What is the power factor for a series LCR circuit at resonance?(a) Infinity(b) -1(c) 0(d) 1I got this question in an interview for job.My question comes from Power in AC Circuit : The Power Factor topic in section Alternating Current of Physics – Class 12
Which of the following is usually taken to make the core of a transformer?(a) Aluminum(b) Copper(c) Soft iron(d) Hard ironThis question was posed to me during an interview.I need to ask this question from Alternating Current topic in chapter Alternating Current of Physics – Class 12
Current remains unchanged in a transformer.(a) True(b) FalseThe question was posed to me during an interview.The above asked question is from Alternating Current topic in chapter Alternating Current of Physics – Class 12
Identify the expression for average power.(a) Pav=\(\frac {V_o I_o}{2}\)sinΦ(b) Pav=\(\frac {V_o I_o}{2}\)cosΦ(c) Pav=\(\frac {V_o I_o}{4}\)cos⁡Φ(d) Pav=2VoIosin⁡ΦI had been asked this question in an international level competition.Origin of the question is Power in AC Circuit : The Power Factor in section Alternating Current of Physics – Class 12
Which among the following varies in both magnitude and sign over a cycle?(a) Apparent power(b) Effective power(c) Instantaneous power(d) Average powerThe question was asked in quiz.My doubt is from Power in AC Circuit : The Power Factor in portion Alternating Current of Physics – Class 12
What is the capacitive reactance of a 5 μF capacitor when it is a part of a circuit whose frequency is 50 Hz?(a) 636.6 Ω(b) 1636.6 Ω(c) 2636.6 Ω(d) 4636.6 ΩThe question was posed to me in an online interview.Origin of the question is AC Voltage Applied to a Capacitor topic in division Alternating Current of Physics – Class 12
When are the voltage and current in LCR-series ac circuit in phase?(a) XL = XC(b) XL > XC(c) XL < XC(d) IndeterminantThe question was posed to me in homework.This interesting question is from AC Voltage Applied to a Series LCR Circuit in chapter Alternating Current of Physics – Class 12
Which value of the current do you measure with an a.c. ammeter?(a) Instantaneous current(b) Root mean square value(c) Electromotive force(d) Peak currentThe question was asked by my college director while I was bunking the class.My question comes from AC Voltage Applied to a Resistor in section Alternating Current of Physics – Class 12

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment