For Better Thermal Conductivity ______and ______Alloys are used during the Manufacturing of Fins present in air-cooled Engines?(a) copper and Steel(b) brass and Copper(c) aluminum and Steel(d) bronze and CopperThe question was asked during an internship interview.This is a very interesting question from Methods of Cooling topic in division Cooling System of Automotive Engine Design

For Better Thermal Conductivity ______and ______Alloys are used during

1.	For Better Thermal Conductivity ______and ______Alloys are used during the Manufacturing of Fins present in air-cooled Engines?(a) copper and Steel(b) brass and Copper(c) aluminum and Steel(d) bronze and CopperThe question was asked during an internship interview.This is a very interesting question from Methods of Cooling topic in division Cooling System of Automotive Engine Design
Answer» Correct option is (a) copper and Steel The best explanation: The THERMAL CONDUCTIVITY for Copper and Steel is 388.0W/m-C and the density is 8.933×10power3 kilogram per meter cube which is the HIGHEST when compared to other metals and their ALLOYS.

Discussion

No Comment Found

Related InterviewSolutions

The anti-freeze should have ______specific heat capacity to be compared to the specific heat capacity of the coolant.(a) zero(b) average(c) low(d) highThe question was posed to me during an online interview.The query is from Coolants in division Cooling System of Automotive Engine Design
The boiling point of the coolant should be ______(a) low(b) high(c) medium(d) none of the aboveThis question was addressed to me during an interview for a job.This intriguing question originated from Coolants topic in section Cooling System of Automotive Engine Design
The abbreviation of SCA is ______(a) supplemental Coolant Additive(b) super Cooling Additive(c) standard Coolant Additive(d) strategic Chemical AdditiveI got this question at a job interview.My question is based upon Coolants topic in portion Cooling System of Automotive Engine Design
The coolant used in heavy-duty engines should be______(a) green in color(b) fully formulated(c) concentrated(d) blueI have been asked this question in class test.My doubt is from Coolants topic in chapter Cooling System of Automotive Engine Design
In a 50% concentration of ethylene glycol (by volume) lowers the freezing point of water to ______Degree Centigrade.(a) -30(b) -50(c) -35(d) -37I had been asked this question at a job interview.Enquiry is from Coolants in chapter Cooling System of Automotive Engine Design
The boiling point of ethylene glycol used in the coolant is ______Degree Centigrade(a) 290(b) 195(c) 200(d) 300I had been asked this question in an interview for internship.This intriguing question originated from Coolants in section Cooling System of Automotive Engine Design
The coolant is made up of three components they are ______(a) water, anti-freezer and SCA’s(b) water, fuel, and silicates(c) water, buffers and SCA’s(d) water, SCA’s and defoamersI had been asked this question in an online interview.My question is based upon Coolants in section Cooling System of Automotive Engine Design
The pH range of Coolant is ______(a) equal to or Greater than 7(b) 0(c) 0-5(d) 3-6I have been asked this question in class test.Query is from Coolants topic in section Cooling System of Automotive Engine Design
______ Meter is used to measure the Glycol and water ratio present in the coolant?(a) hydrometer(b) refractometer(c) galvanometer(d) voltmeterThe question was posed to me during an online interview.This is a very interesting question from Coolants in section Cooling System of Automotive Engine Design
Carboxylates are added in the Coolant to prevent from ______(a) freezing(b) condensation(c) evaporation(d) corrosionThe question was posed to me by my college director while I was bunking the class.This intriguing question originated from Coolants in portion Cooling System of Automotive Engine Design

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment