The grown junction type transistors is generally used for_________(a) PNP transistors(b) NPN transistors(c) Both transistors(d) Depends on the material usedThis question was posed to me in examination.The doubt is from Transistor Construction in section Transistor Characteristics of Electronic Devices & Circuits

The grown junction type transistors is generally used for_________(a)

1.	The grown junction type transistors is generally used for_________(a) PNP transistors(b) NPN transistors(c) Both transistors(d) Depends on the material usedThis question was posed to me in examination.The doubt is from Transistor Construction in section Transistor Characteristics of Electronic Devices & Circuits
Answer» The correct choice is (b) NPN transistors For explanation I would say: Grown JUNCTION TYPE transistors are manufactured through growing SINGLE large crystal which is slowly PULLED from the melt in crystal growing furnace. This is generally USED for NPN transistors.

Discussion

No Comment Found

Related InterviewSolutions

The point on the DC load line which is represented by ‘Q’ is called _________(a) cut off point(b) cut in point(c) breakdown point(d) operating pointI got this question during an online exam.This key question is from The Common Collector Configuration in section Transistor Characteristics of Electronic Devices & Circuits
The CC configuration has an input resistance_________(a) 500kΩ(b) 750kΩ(c) 600kΩ(d) 400kΩI got this question in an internship interview.I would like to ask this question from The Common Collector Configuration topic in section Transistor Characteristics of Electronic Devices & Circuits
The negative sign in the formula of amplification factor indicates_________(a) that IE flows into transistor while IC flows out it(b) that IC flows into transistor while IE flows out it(c) that IB flows into transistor while IC flows out it(d) that IC flows into transistor while IB flows out itThis question was addressed to me during an interview for a job.Query is from The Common Base Configuration topic in portion Transistor Characteristics of Electronic Devices & Circuits
In ICEO, wt does the subscript ‘CEO’ mean?(a) collector to base emitter open(b) emitter to base collector open(c) collector to emitter base open(d) emitter to collector base openI have been asked this question in class test.This interesting question is from The Common Emitter Configuration in section Transistor Characteristics of Electronic Devices & Circuits
The collector current will not reach the steady state value instantaneously because of_________(a) stray capacitances(b) resistances(c) input blocking capacitances(d) coupling capacitanceI have been asked this question in an interview for job.I'd like to ask this question from Transistor Switching Times topic in division Transistor Characteristics of Electronic Devices & Circuits
The input characteristics of a CB transistor resembles_________(a) Forward biased diode(b) Illuminated photo diode(c) LED(d) Zener diodeThis question was posed to me in a national level competition.My doubt is from The CB Characteristics topic in section Transistor Characteristics of Electronic Devices & Circuits
What is the output resistance of CC transistor?(a) 25 Ω(b) 50 Ω(c) 100 Ω(d) 150 ΩI have been asked this question in an internship interview.My enquiry is from The Common Collector Configuration topic in section Transistor Characteristics of Electronic Devices & Circuits
The emitter current consist of_________(a) electrons passing from collector to emitter(b) holes crossing from base to collector(c) electron current Ine constituted by electrons(d) immobile charge carriersI have been asked this question by my school principal while I was bunking the class.This interesting question is from The Transistor as an Amplifier in division Transistor Characteristics of Electronic Devices & Circuits
Which of the following are true for a PNP transistor?(a) the emitter current is less than the collector current(b) the collector current is less than the emitter current(c) the electrons are majority charge carriers(d) the holes are the minority charge carriersThe question was posed to me at a job interview.Origin of the question is The Junction Transistor in portion Transistor Characteristics of Electronic Devices & Circuits
The base emitter voltage in a cut off region is_________(a) greater than 0.7V(b) equal to 0.7V(c) less than 0.7V(d) cannot be predictedI got this question in unit test.This question is from Transistor as a Switch in chapter Transistor Characteristics of Electronic Devices & Circuits

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment