The manifold must be larger enough to allow sufficient flow for what?(a) Max power(b) Max emission(c) Min emission(d) Lower torqueThe question was asked in exam.I'm obligated to ask this question of Intake System in division Fuels, Intake System & Leakage Preventers of Automotive Engine Design

The manifold must be larger enough to allow sufficient flow for what?(

1.	The manifold must be larger enough to allow sufficient flow for what?(a) Max power(b) Max emission(c) Min emission(d) Lower torqueThe question was asked in exam.I'm obligated to ask this question of Intake System in division Fuels, Intake System & Leakage Preventers of Automotive Engine Design
Answer» The correct choice is (a) Max power To explain: The INLET manifold carries the air-fuel mixture from the carburetor to the CYLINDERS and the manifold Inner surface MUST be very SMOOTH such that it should not hold any CHARGE around its surface.

Discussion

No Comment Found

Related InterviewSolutions

Which material is not used as oil pan gaskets?(a) Cork(b) Felcoid(c) Asbestos(d) FelcopreneI got this question during an interview.This key question is from Leakage Preventers topic in chapter Fuels, Intake System & Leakage Preventers of Automotive Engine Design
Which type of gaskets are treated to withstand anti-freezers?(a) Pump gasket(b) Manifold gasket(c) Oil pan gasket(d) Cylinder head gasketI got this question in an online interview.My question is taken from Leakage Preventers in chapter Fuels, Intake System & Leakage Preventers of Automotive Engine Design
Which type of gasket is made of perforated steel sandwiched between two treated asbestos sheets?(a) Shim type(b) Embossed steel(c) Shimbestos(d) FelbestosThis question was posed to me in unit test.This interesting question is from Leakage Preventers topic in chapter Fuels, Intake System & Leakage Preventers of Automotive Engine Design
Which type of gasket is the combination of a thin steel heat shield and a specially treated metal-reinforced asbestos?(a) Shim type(b) Embossed steel(c) Shimbestos(d) Metal sandwichThis question was posed to me in an interview.Enquiry is from Leakage Preventers in division Fuels, Intake System & Leakage Preventers of Automotive Engine Design
Which type of gasket is used in passenger cars?(a) Shim type(b) Embossed steel(c) Shimbestos(d) Metal sandwichI had been asked this question in a job interview.My query is from Leakage Preventers topic in portion Fuels, Intake System & Leakage Preventers of Automotive Engine Design
What is the combustion temperature experienced by the gasket between the cylinder head and engine block in a petrol engine?(a) more than 1100°C(b) less than 700°C(c) more than 2400°C(d) less than 200°CI got this question in final exam.This key question is from Leakage Preventers topic in portion Fuels, Intake System & Leakage Preventers of Automotive Engine Design
Which type of gasket is used on I-head engines?(a) Metal sandwich-type(b) Shim type(c) Embossed steel(d) Both Shim or embossed steel typeI had been asked this question in an online interview.Question is from Leakage Preventers in section Fuels, Intake System & Leakage Preventers of Automotive Engine Design
What is the combustion pressure experienced by the gasket between cylinder head and engine block in a turbocharged diesel engine?(a) 1500KPa(b) 450KPa(c) 2000KPa(d) 700KPaI got this question during an interview.My question is based upon Leakage Preventers topic in chapter Fuels, Intake System & Leakage Preventers of Automotive Engine Design
What is the combustion pressure experienced by the gasket between the cylinder head and engine block in a petrol engine?(a) 1500KPa(b) 450KPa(c) 2000KPa(d) 700KPaThe question was posed to me during an online interview.My doubt is from Leakage Preventers topic in section Fuels, Intake System & Leakage Preventers of Automotive Engine Design
Cork is made of which natural resource?(a) Seeds(b) Animal fat(c) Fossils(d) Bark of OakI had been asked this question in examination.My doubt is from Leakage Preventers in division Fuels, Intake System & Leakage Preventers of Automotive Engine Design

The manifold must be larger enough to allow sufficient flow for what?(a) Max power(b) Max emission(c) Min emission(d) Lower torqueThe question was asked in exam.I'm obligated to ask this question of Intake System in division Fuels, Intake System & Leakage Preventers of Automotive Engine Design

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment