100525 + Interview Questions in GENERAL QA IN GENERAL AWARENESS

1.	Long ago people ___ little about those minerals. A) had known B) knowed C) will know D) knew E) have known
Answer» Correct option is D) knew

Discussion

2.	The plane ___ at 4 and it ___ us 20 minutes to get there. A) was landing/was taking B) was landing/took C) landed/took D) lands/was taken E) has landed/is taking
Answer» Correct option is C) landed/took

Discussion

3.	You can cross the road at a ______. A) cross-road B) crossing C) crosser D) road
Answer» Correct option is B) crossing

Discussion

4.	A: _____ are we _____? B: To the class. A) When / going B) Where / go C) When / go D) Where / going
Answer» Correct option is D) Where / going No A- when/going

4.

A: _ are we _? B: To the class. A) When / going B) Where / go C) When / go D) Where / going

Answer»

Correct option is D) Where / going

No A- when/going

Discussion

5.	His sister ______ tennis on Wednesday. A) play B) plays C) go to D) practice
Answer» Correct option is B) plays

Discussion

6.	______ you ever ______ Japanese food? A) Did / eat B) have / eaten C) Have / ate D) Do / eaten
Answer» Correct option is B) have / eaten

Discussion

7.	It ______ snowing for five hours. A) has been B) is C) was D) will be
Answer» Correct option is A) has been

Discussion

8.	We ___ he ___ ill. A) did not know/was B) knew/am ill C) knew/will be D) had known/is E) were known/be
Answer» Correct option is A) did not know/was

Discussion

9.	We should put waste paper in a ______. A) box B) park C) litter-bin D) pavement
Answer» Correct option is C) litter-bin

Discussion

10.	We usually ______ table tennis every Saturday. A) to play B) plays C) will play D) play
Answer» Correct option is D) play

Discussion

11.	A: Oh no! It _____. We can’t go out. B: It always _____ here in March. A) is snowing / snows B) snows / ’s snowing C) ’s snow / snows D) snows / snows
Answer» Correct option is A) is snowing / snows

Discussion

12.	A: Shall we go out? B: No, it ______. A) is snowing B) snows C) was snowing D) snowed
Answer» Correct option is A) is snowing

Discussion

13.	Yesterday at this time it ___ . A) had snowed B) snows C) snowed D) was snowing E) had been snowing
Answer» Correct option is D) was snowing

Discussion

14.	We get wet when it ______. A) freezes B) blows C) shines D) rains
Answer» Correct option is D) rains

Discussion

15.	It is cold in England when a north wind ______. A) goes B) blows C) covers D) passes
Answer» Correct option is B) blows

Discussion

16.	Children enjoy playing games when it ______. A) snows B) blows C) freezes D) is cold
Answer» Correct option is A) snows

Discussion

17.	It is warm and pleasant when the sun ______. A) pours B) lights C) shines D) comes
Answer» Correct option is C) shines

Discussion

18.	When it is very cold, everything ______. A) rains B) freezes C) blows D) snows
Answer» Correct option is B) freezes

Discussion

19.	Drive carefully. It ______ heavily this morning. A) snows B) snowing C) snow D) is snowing
Answer» Correct option is D) is snowing

Discussion

20.	When it rains very heavily, it ______. A) waters B) pours C) snows D) freezes
Answer» Correct option is B) pours

Discussion

21.	They have everything you ______ for your house. A) have B) like C) need D) adore
Answer» Correct option is C) need

Discussion

22.	Put the suitable articles in the following.1. He goes for college.2. We regret for the delay caused.3. He has been waiting since a long time.4. He is superior than me.5. The train arrived in time
Answer» 1. He goes to college. 2. We regret the delay caused. 3. He has been waiting for a long time. 4. He is superior to me. 5. The train arrived on time

22.

Put the suitable articles in the following.1. He goes for college.2. We regret for the delay caused.3. He has been waiting since a long time.4. He is superior than me.5. The train arrived in time

Answer»

1. He goes to college.

2. We regret the delay caused.

3. He has been waiting for a long time.

4. He is superior to me.

5. The train arrived on time

Discussion

23.	My friends say I like to ______ money. A) find B) spendC) see D) gain
Answer» Correct option is B) spend

Discussion

24.	Put the suitable articles in the following.1. We need not spend money for trifles.2. He will be cured from his fever.3. This is different to that.
Answer» 1. We need not spend money on trifles. 2. He will be cured of his fever. 3. This is different from that.

24.

Put the suitable articles in the following.1. We need not spend money for trifles.2. He will be cured from his fever.3. This is different to that.

Answer»

1. We need not spend money on trifles.

2. He will be cured of his fever.

3. This is different from that.

Discussion

25.	Choose the best alternative to replace the underlined words.He just seems to spend money like water these days. A) fall through B) go through C) put off D) give out
Answer» Correct option is B) go through

Discussion

26.	Choose the best alternative to replace the underlined words.I had a wonderful idea to save money but it didn’t succeed. A) catch up B) bring out C) come off D) come up
Answer» Correct option is C) come off

Discussion

27.	The line’s very bad. It’s difficult to ________ what he’s saying. A) make off B) make out C) make for D) make up
Answer» Correct option is B) make out

Discussion

28.	He’s full of wonderful plans, but they very seldom ____ . A) come in B) come about C) come off D) come down
Answer» Correct option is B) come about

Discussion

29.	The American film I saw was ________ . A) not very funny B) not much funny C) not very fun D) not too much fun
Answer» Correct option is A) not very funny

Discussion

30.	She ________ her friends for advice on investing her money. A) looks after B) looks away C) looks to D) looks into
Answer» Correct option is C) looks to

Discussion

31.	where is a blood factory in human body ?
Answer» Bone Marrow is the blood factory in human body

Discussion

32.	He lives ____ an island _____ the west of Scotland. A) on / in B) in / in C) on / on D) in / at
Answer» Correct option is A) on / in

Discussion

33.	_____ _____ looks after money. A) A nurse B) A postman C) An accountant D) A dentist
Answer» C) An accountant

Discussion

34.	__________ designs buildings. A) A pilot B) An architect C) An interpreter D) An engineer
Answer» B) An architect

Discussion

35.	Which of these is meditative Aasana? A. Padmasan B. Garudasana C. Sarvangasana D. Chakrasan
Answer» A. Padmasan Padmasan is meditative Aasana.

35.

Which of these is meditative Aasana? A. Padmasan B. Garudasana C. Sarvangasana D. Chakrasan

Answer»

A. Padmasan

Padmasan is meditative Aasana.

Discussion

36.	Explain the methods of developing 3-D designs.
Answer» In 3-D design, a designer uses all three axes (x, y and z) to interpret and develop a realistic figure of the desired object. Almost all 3-D design methods incorporate four fundamental processes while interpreting an object electronically in its three dimensions: modeling, layout designing, animation and rendering. Modeling in 3-D designs is referred to the interpretation and development of basic object shape, while layout designing deals with the placement of an object within a suitable background. Similarly, the process of animation deals with any movement or motion associated with the object, and rendering defines angling and positioning of the light source within the design. Following are some of the techniques used in 3D Modeling: Contour/Edge modeling: In Edge modeling the modelers develop the model piece by piece, instead of refining a primitive shape. This is done by placing the loops of polygons along the outlines and filling the gaps that lie between them. This process is applied, as it is difficult to complete certain meshes through box modeling. For instance, the human face cannot be completed only through box modeling. You can collaborate with one of the reputed modeling companies to get these models designed. The experts carry out the 3D modeling process with dexterity and develop the desired models. Digital sculpting: Digital sculpting (also called 3D sculpting) is when an artist sculpts a 3D object on a computer with material similar to digitized clay. Software with brushes and tools that push, pull, pinch and smooth make it easy to create detailed sculpts that mimic real life textures and objects. The automobile industry has been using this technique while designing the cars etc. and has integrated these technologies into the product development and marketing strategies. Digital sculpting is a type of disruptive technology, and it has leveraged the 3D modeling process to a great extent. Image-based modeling: In image-based modeling, 3D objects are derived algorithmically from a set of 2D images, that are static in nature. This type of modeling is used in cases, where the modeler faces budgetary or time restrictions, and are not able to develop fully realized 3D images. This is one of the most common type of 3D modeling in the film industry. Over the years, image based modeling is increasingly being used in the entertainment industry. Surface modeling: Surface modeling helps in creating a 3D spline. The process involves the incorporation of a 2D spline, and it is different from NURBS. This modeling technique is primarily used to generate organic 3D models in films. It offers a good amount of flexibility to the modelers. They can easily create a 3D representation with various requirements, using geometric entities like curves or surfaces.

36.

Explain the methods of developing 3-D designs.

Answer»

In 3-D design, a designer uses all three axes (x, y and z) to interpret and develop a realistic figure of the desired object. Almost all 3-D design methods incorporate four fundamental processes while interpreting an object electronically in its three dimensions: modeling, layout designing, animation and rendering. Modeling in 3-D designs is referred to the interpretation and development of basic object shape, while layout designing deals with the placement of an object within a suitable background. Similarly, the process of animation deals with any movement or motion associated with the object, and rendering defines angling and positioning of the light source within the design.

Following are some of the techniques used in 3D Modeling:

Contour/Edge modeling: In Edge modeling the modelers develop the model piece by piece, instead of refining a primitive shape. This is done by placing the loops of polygons along the outlines and filling the gaps that lie between them. This process is applied, as it is difficult to complete certain meshes through box modeling. For instance, the human face cannot be completed only through box modeling. You can collaborate with one of the reputed modeling companies to get these models designed. The experts carry out the 3D modeling process with dexterity and develop the desired models.

Digital sculpting: Digital sculpting (also called 3D sculpting) is when an artist sculpts a 3D object on a computer with material similar to digitized clay. Software with brushes and tools that push, pull, pinch and smooth make it easy to create detailed sculpts that mimic real life textures and objects. The automobile industry has been using this technique while designing the cars etc. and has integrated these technologies into the product development and marketing strategies. Digital sculpting is a type of disruptive technology, and it has leveraged the 3D modeling process to a great extent.

Image-based modeling: In image-based modeling, 3D objects are derived algorithmically from a set of 2D images, that are static in nature. This type of modeling is used in cases, where the modeler faces budgetary or time restrictions, and are not able to develop fully realized 3D images. This is one of the most common type of 3D modeling in the film industry. Over the years, image based modeling is increasingly being used in the entertainment industry.

Surface modeling: Surface modeling helps in creating a 3D spline. The process involves the incorporation of a 2D spline, and it is different from NURBS. This modeling technique is primarily used to generate organic 3D models in films. It offers a good amount of flexibility to the modelers. They can easily create a 3D representation with various requirements, using geometric entities like curves or surfaces.

Discussion

37.	An IP address consists of bytes long. (a) 4 (b) 16 (c) 32 (d) 64
Answer» An IP address consists 4 Bytes long.

Discussion

38.	From the following which media is using light rays for data transfer. (a) Twisted pair cable (b) Optical fibre (c) Coanial cable (d) Microwave station
Answer» (b) Optical fiber

Discussion

39.	1. To make data transfer faster, a switch stores two different addresses of all the devices connected to it. What are they? 2. There are 5 computers in your computer lab. Write short notes on any three possible methods to interconnect these computers. Draw the diagram of each method.
Answer» 1. Identification of computers over a network: A computer gets a data packet on a network, it can identify the senders address easily. It is similar to ours nails mail, each letter is stamped in sender’s post office as well as receiver’s post office. (1) Media Access Control(MAC) address: It is a unique 12 digit hexadecimal number(IMEI for mobile phones, it is a 15 digit decimal number) assigned to each NIC by its manufacturer. This address is known as MAC address and its permanent. It is of the form. MM:MM:MM:SS:SS:SS. The first MM:MM:MM contains the ID number of the adapter company and the second SS:SS:SS represents the serial number assigned to the adapter by the company. (2) Internet Protocol (IP) address: An IP address has 4 parts numeric address. Each parts contains 8 bits. By using 8 bits we can represent a decimal number between 0 to 255(2°=256 numbers). Each part is separated by dot. A total of 48=32 bits used. But nowadays 128 bits are used for IP address. 2. Network topologies:* Physical or logical arrangement of computers on a network is called structure or topology. It is the geometrical arrangement of computers in a network. The major topologies developed are star, bus, ring, tree and mesh. (1) Star Topology: A star topology has a server all other computers are connected to it. If computer A wants to transmit a message to computer B. Then computer A first transmit the message to the server then the server retransmits the message to the computer B. That means all the messages are transmitted through the server. Advantages are add or remove workstations to a star network is easy and the failure of a workstation will not effect the other. The disadvantage is that if the server fails the entire network will fail. (2) Bus Topology: Here all the computers are attached to a single cable called bus. Here one computer transmits all other computers listen. Therefore it is called broadcast bus. The transmission from any station will travel in both the direction. The connected computers can hear the message and check whether it is for them or not. Advantages are add or remove computer is very easy. It requires less cable length and the installation cost is less. Disadvantage is fault detection is very difficult because of no central computer. (3) Ring Topology: Here all the computers are connected in the shape of a ring and it is a closed loop. Here also there is no central computer. Here a computer transmits a message, which is tagged along with its destination computer’s address. The message travels in one direction and each node check whether the message is for them. If not, it passes to the next node. It requires only short cable length. If a single node fails, at least a portion of the network will fail. To add a node is very difficult. (4) Hybrid Topology: It is a combination of any two or more network topologies. Tree topology and mesh topology can be considered as hybrid topology. (a) Tree Topology: The structure of a tree topology is the shape of an inverted tree with a central node and branches as nodes. It is a variation of bus topology. The data transmission takes place in the way as in bus topology. The disadvantage is that if one node fails, the entire portion will fail. (b) Mesh Topology: In this topology each node is connected to more than one node. It is just like a mesh (net). There are multiple paths between computers. If one path fails, we can transmit data through another path.

39.

1. To make data transfer faster, a switch stores two different addresses of all the devices connected to it. What are they? 2. There are 5 computers in your computer lab. Write short notes on any three possible methods to interconnect these computers. Draw the diagram of each method.

Answer»

1. Identification of computers over a network:

A computer gets a data packet on a network, it can identify the senders address easily. It is similar to ours nails mail, each letter is stamped in sender’s post office as well as receiver’s post office.

(1) Media Access Control(MAC) address:

It is a unique 12 digit hexadecimal number(IMEI for mobile phones, it is a 15 digit decimal number) assigned to each NIC by its manufacturer. This address is known as MAC address and its permanent. It is of the form. MM:MM:MM:SS:SS:SS. The first MM:MM:MM contains the ID number of the adapter company and the second SS:SS:SS represents the serial number assigned to the adapter by the company.

(2) Internet Protocol (IP) address:

An IP address has 4 parts numeric address. Each parts contains 8 bits. By using 8 bits we can represent a decimal number between 0 to 255(2°=256 numbers). Each part is separated by dot. A total of 4*8=32 bits used. But nowadays 128 bits are used for IP address.

2. Network topologies:

Physical or logical arrangement of computers on a network is called structure or topology. It is the geometrical arrangement of computers in a network. The major topologies developed are star, bus, ring, tree and mesh.

(1) Star Topology:

A star topology has a server all other computers are connected to it. If computer A wants to transmit a message to computer B. Then computer A first transmit the message to the server then the server retransmits the message to the computer B.

That means all the messages are transmitted through the server. Advantages are add or remove workstations to a star network is easy and the failure of a workstation will not effect the other. The disadvantage is that if the server fails the entire network will fail.

(2) Bus Topology:

Here all the computers are attached to a single cable called bus. Here one computer transmits all other computers listen. Therefore it is called broadcast bus. The transmission from any station will travel in both the direction. The connected computers can hear the message and check whether it is for them or not.

Advantages are add or remove computer is very easy. It requires less cable length and the installation cost is less. Disadvantage is fault detection is very difficult because of no central computer.

(3) Ring Topology:

Here all the computers are connected in the shape of a ring and it is a closed loop. Here also there is no central computer. Here a computer transmits a message, which is tagged along with its destination computer’s address.

The message travels in one direction and each node check whether the message is for them. If not, it passes to the next node. It requires only short cable length. If a single node fails, at least a portion of the network will fail. To add a node is very difficult.

(4) Hybrid Topology:

It is a combination of any two or more network topologies. Tree topology and mesh topology can be considered as hybrid topology.

(a) Tree Topology:

The structure of a tree topology is the shape of an inverted tree with a central node and branches as nodes. It is a variation of bus topology. The data transmission takes place in the way as in bus topology. The disadvantage is that if one node fails, the entire portion will fail.

(b) Mesh Topology:

In this topology each node is connected to more than one node. It is just like a mesh (net). There are multiple paths between computers. If one path fails, we can transmit data through another path.

Discussion

40.	Identify the type of LAN topology in which there are more than one path between nodes, (a) Star (b) Ring (c) Mesh (d) Bus
Answer» (c) Mesh topology

Discussion

41.	1. To make data transfer faster, a switch stores two different addresses of all the devices connected to it. Which are they? 2. Name the device that can interconnect two different networks having different protocols.
Answer» 1. IP and MAC address 2. Gateway

41.

1. To make data transfer faster, a switch stores two different addresses of all the devices connected to it. Which are they? 2. Name the device that can interconnect two different networks having different protocols.

Answer»

1. IP and MAC address

2. Gateway

Discussion

42.	Is it possible to connect all the computers to a network? Justify your answer.
Answer» No. It is not possible to connect all the computers to a network. A computer, with a hardware called Network Interface Card (NIC), can only connect to a network.

Discussion

43.	What is DHTML?
Answer» Dynamic HTML is an extension to HTML that will enable a web page to react to user input without sending requests to the web server.

Discussion

44.	1. Different networks with different protocols are connected by a device called .......Router Bridge Switch Gateway 2. Define Protocol
Answer» 1. Gateway 2. Protocol: The rules and conventions for transmitting data.

44.

1. Different networks with different protocols are connected by a device called .......Router Bridge Switch Gateway 2. Define Protocol

Answer»

1. Gateway

2. Protocol: The rules and conventions for transmitting data.

Discussion

45.	A device used to connect dissimilar networks is calleda) hubb) switchc) bridged) gateway
Answer» (d) gateway A device used to connect dissimilar networks is called gateway.

45.

A device used to connect dissimilar networks is calleda) hubb) switchc) bridged) gateway

Answer»

(d) gateway

A device used to connect dissimilar networks is called gateway.

Discussion

46.	Who developed JavaScript?
Answer» Brendan Eich

Discussion

47.	NIC stands for_________.a) new internet cardb) network internet cardc) net interact cardd) network interface card
Answer» (d) network interface card NIC stands for network interface card.

47.

NIC stands for_________.a) new internet cardb) network internet cardc) net interact cardd) network interface card

Answer»

(d) network interface card

NIC stands for network interface card.

Discussion

48.	List the websites that offer free CSS templates (write complete URL).
Answer» ● http://html5up.net ● http://www.cssportal.com/css-templates/ ● www.freecsstemplates.org ● www.free-css.com ● www.templatemo.com ● www.oswd.org ● www.openwebdesign.org

48.

List the websites that offer free CSS templates (write complete URL).

Answer»

● http://html5up.net

● http://www.cssportal.com/css-templates/

● www.freecsstemplates.org

● www.free-css.com

● www.templatemo.com

● www.oswd.org

● www.openwebdesign.org

Discussion

49.	Rita created a website. Before she publishes the website, she needs to verify if there are any pending issues. This will help her save time and unnecessary problems that may arise post publishing the website. Give her the necessary steps to verify and fix errors, if any.
Answer» To verify and fix (if there are any errors), do the following: 1) Open the Website. 2) Select Tools > Recalculate Hyperlinks. A dialog box appears 3)Click Yes. If there are any issues, they will be automatically fixed

49.

Rita created a website. Before she publishes the website, she needs to verify if there are any pending issues. This will help her save time and unnecessary problems that may arise post publishing the website. Give her the necessary steps to verify and fix errors, if any.

Answer»

To verify and fix (if there are any errors), do the following:

1) Open the Website.

2) Select Tools > Recalculate Hyperlinks. A dialog box appears

3)Click Yes. If there are any issues, they will be automatically fixed

Discussion

50.	Term DHTML stands for_________
Answer» Dynamic HTML

Discussion

Explore topic-wise InterviewSolutions in Current Affairs.

Long ago people ___ little about those minerals. A) had known B) knowed C) will know D) knew E) have known

The plane ___ at 4 and it ___ us 20 minutes to get there. A) was landing/was taking B) was landing/took C) landed/took D) lands/was taken E) has landed/is taking

You can cross the road at a ______. A) cross-road B) crossing C) crosser D) road

A: _____ are we _____? B: To the class. A) When / going B) Where / go C) When / go D) Where / going

His sister ______ tennis on Wednesday. A) play B) plays C) go to D) practice

______ you ever ______ Japanese food? A) Did / eat B) have / eaten C) Have / ate D) Do / eaten

It ______ snowing for five hours. A) has been B) is C) was D) will be

We ___ he ___ ill. A) did not know/was B) knew/am ill C) knew/will be D) had known/is E) were known/be

We should put waste paper in a ______. A) box B) park C) litter-bin D) pavement

We usually ______ table tennis every Saturday. A) to play B) plays C) will play D) play

A: Oh no! It _____. We can’t go out. B: It always _____ here in March. A) is snowing / snows B) snows / ’s snowing C) ’s snow / snows D) snows / snows

A: Shall we go out? B: No, it ______. A) is snowing B) snows C) was snowing D) snowed

Yesterday at this time it ___ . A) had snowed B) snows C) snowed D) was snowing E) had been snowing

We get wet when it ______. A) freezes B) blows C) shines D) rains

It is cold in England when a north wind ______. A) goes B) blows C) covers D) passes

Children enjoy playing games when it ______. A) snows B) blows C) freezes D) is cold

It is warm and pleasant when the sun ______. A) pours B) lights C) shines D) comes

When it is very cold, everything ______. A) rains B) freezes C) blows D) snows

Drive carefully. It ______ heavily this morning. A) snows B) snowing C) snow D) is snowing

When it rains very heavily, it ______. A) waters B) pours C) snows D) freezes

They have everything you ______ for your house. A) have B) like C) need D) adore

Put the suitable articles in the following.1. He goes for college.2. We regret for the delay caused.3. He has been waiting since a long time.4. He is superior than me.5. The train arrived in time

My friends say I like to ______ money. A) find B) spendC) see D) gain

Put the suitable articles in the following.1. We need not spend money for trifles.2. He will be cured from his fever.3. This is different to that.

Choose the best alternative to replace the underlined words.He just seems to spend money like water these days. A) fall through B) go through C) put off D) give out

Choose the best alternative to replace the underlined words.I had a wonderful idea to save money but it didn’t succeed. A) catch up B) bring out C) come off D) come up

The line’s very bad. It’s difficult to ________ what he’s saying. A) make off B) make out C) make for D) make up

He’s full of wonderful plans, but they very seldom ____ . A) come in B) come about C) come off D) come down

The American film I saw was ________ . A) not very funny B) not much funny C) not very fun D) not too much fun

She ________ her friends for advice on investing her money. A) looks after B) looks away C) looks to D) looks into

where is a blood factory in human body ?

He lives ____ an island _____ the west of Scotland. A) on / in B) in / in C) on / on D) in / at

_____ _____ looks after money. A) A nurse B) A postman C) An accountant D) A dentist

__________ designs buildings. A) A pilot B) An architect C) An interpreter D) An engineer

Which of these is meditative Aasana? A. Padmasan B. Garudasana C. Sarvangasana D. Chakrasan

Explain the methods of developing 3-D designs.

An IP address consists of bytes long. (a) 4 (b) 16 (c) 32 (d) 64

From the following which media is using light rays for data transfer. (a) Twisted pair cable (b) Optical fibre (c) Coanial cable (d) Microwave station

1. To make data transfer faster, a switch stores two different addresses of all the devices connected to it. What are they? 2. There are 5 computers in your computer lab. Write short notes on any three possible methods to interconnect these computers. Draw the diagram of each method.

Identify the type of LAN topology in which there are more than one path between nodes, (a) Star (b) Ring (c) Mesh (d) Bus

1. To make data transfer faster, a switch stores two different addresses of all the devices connected to it. Which are they? 2. Name the device that can interconnect two different networks having different protocols.

Is it possible to connect all the computers to a network? Justify your answer.

What is DHTML?

1. Different networks with different protocols are connected by a device called .......Router Bridge Switch Gateway 2. Define Protocol

A device used to connect dissimilar networks is calleda) hubb) switchc) bridged) gateway

Who developed JavaScript?

NIC stands for_________.a) new internet cardb) network internet cardc) net interact cardd) network interface card

List the websites that offer free CSS templates (write complete URL).

Rita created a website. Before she publishes the website, she needs to verify if there are any pending issues. This will help her save time and unnecessary problems that may arise post publishing the website. Give her the necessary steps to verify and fix errors, if any.

Term DHTML stands for_________

The plane _ at 4 and it _ us 20 minutes to get there. A) was landing/was taking B) was landing/took C) landed/took D) lands/was taken E) has landed/is taking

A: _ are we _? B: To the class. A) When / going B) Where / go C) When / go D) Where / going

you ever Japanese food? A) Did / eat B) have / eaten C) Have / ate D) Do / eaten

We _ he _ ill. A) did not know/was B) knew/am ill C) knew/will be D) had known/is E) were known/be

A: Oh no! It _. We can’t go out. B: It always _ here in March. A) is snowing / snows B) snows / ’s snowing C) ’s snow / snows D) snows / snows

He lives an island _ the west of Scotland. A) on / in B) in / in C) on / on D) in / at

_ _ looks after money. A) A nurse B) A postman C) An accountant D) A dentist