100525 + Interview Questions in GENERAL QA IN GENERAL AWARENESS

1.	Which of the following is a stage of innovation ?(A) Identification of business idea (B) Business planning(C) Formation of project report (D) All of the above
Answer» Business planning is a stage of innovation.

Discussion

2.	If error in the masurement of mass is `0.8` of and in volume it is `0.4%` then error in the measurement of density isA. `1.2%`B. `0.4%`C. `0.8%`D. `1%`
Answer» Correct Answer - A By `rho = m//v` so percentage error can find.

Discussion

3.	A reflecting surface is represented by the equation `y = (2L)/(pi) sin ((pi x)/(L))`, where `0 le x le L`. A ray of light travelling horizontally becomes vertical after reflection with the surface. The co-ordinates of the point where this ray is incident is. A. `((L)/(4), (sqrt2L)/(pi))`B. `((L)/(3), (sqrt3L)/(pi))`C. `((3L)/(4), (sqrt2L)/(pi))`D. `((2L)/(3), (sqrt3L)/(pi))`
Answer» Correct Answer - B `((dy)/(dx))_("tangent") = 2 cos (pi x)/(L)` and tan `(90 + 45^(@)) = ((dy)/(dx))_("normal")` `rArr x = (L)/(3), y = (sqrt3L)/(pi)`

Discussion

4.	An object O is located 40cm from the first of two thin converging lenses (each of focal length 20cm), as shown in the figure below. If speed of the right lens is `7cm//s` rightwards, speed of final image is `7x//4cm//s` at the instant shown, find the value of x.
Answer» Correct Answer - 3 From first lens `x=-40cm` `V=40cm` For second lens `u=20cm` `V=10cm` `(dV)/(dt)=((V)/(u))^(2)((du)/(dt))` `V_(I//L)=((10)/(20))^(2)V_(0//L)` `(V_(I)-V_(L))=(1)/(4)(V_(0)-V_(L))` `(V_(I)-7)=-(7)/(4)` `V_(I)=(21)/(4)` `x=3`

Discussion

5.	A reflecting surface is represented by the equation `y = (2L)/(pi) sin ((pi x)/(L))`, where `0 le x le L`. A ray of light travelling horizontally becomes vertical after reflection with the surface. The co-ordinates of the point where this ray is incident is. A. `(L/4,(sqrt(2)L)/(lamda))`B. `(L/3,(sqrt(3)L)/(pi))`C. `((3L)/4,(sqrt(2)L)/(lamda))`D. `((4L)/3,(sqrt(3)L)/(pi))`
Answer» Correct Answer - B `(dy)/(dx)=2 "cos" ((2x)/L)=-1` `cos(pix)/L=-1/2` `x=L/3,(2L)/3`

Discussion

6.	The dispersive powers of two materials are `0.30 & 0.28`. They are used to construct two lenses which are kept in contact to eliminate chromatic aberration (that means the `f_(v)=f_(r)` the focal ) If the material of disperive power 0.30 is 10cm, then the focal lenght (for av, color) of the lens of other material is :A. 28/3 cmB. `-0.20//3m`C. 0.75/7mD. None of these
Answer» Correct Answer - B `[(W_(1))/(f_(1))+(W_(2))/(f_(2))=0]` `W_(1)=0.3, f_(1)=10cm. W_(3)=0.28` `f_(2)=(-28)/(3)cm`

Discussion

7.	The reactivity of alkyl halides for Wurtz reaction is:A. (a)`1^(@)gt 2^(@)gt 3^(@)`B. (b)`3^(@)gt 2^(@)gt 1^(@)`C. (c )`2^(@)gt 3^(@)gt 1^(@)`D. (d)`1^(@)gt 3^(@)gt 2^(@)`
Answer» Correct Answer - A `3^(@)` halides may produce alkene during Wurtz reaction.

Discussion

8.	A particle approaches from very large distance towards concave mirror along the principal axis. By the time the particle reaches the mirror the distance between the particle and its image willA. first increases then decreasesB. first decreases then increasesC. first decreases then decreases then again increasesD. first decreases then increases then again decrease
Answer» Correct Answer - D It is simple to understand by ray diagram.

Discussion

9.	An eye can distinguish between two points of an object if they are separated by more than 0.22 mm when the object is placed at 25 cm from the eye. The object is now seen by a compound microscope having a 20 D objective and 10 D eyepiece separated by a distance of 20 cm. The final image is formed at 25 cm from the eye. What is the minimum separation between two points of the object which can now be distinguished?A. 4000J,3AB. 8000 J,3AC. 4000 J,4AD. 8000 J,5A
Answer» Correct Answer - A Magnifying power of microscope `u_(c)=(Df_(c))/(D+f_(c))=(10xx25)/(10+25)=(50)/(7)cm` `v_(0)=20-(50)/(7)=(90)/(7)cm` `m_("obj")=(\|f-v\|)/(f)-((90)/(7)-5)/(5)=(11)/(7)cm` `m_("eye")=1+(D)/(f_(c))=1+2.5=3.5` `M=m_("obj")xxm_("eye")=3.5xx(11)/7)=(11)/2)` New resolving limit `=(0.22)/(11//2)mm=0.04mm`

Discussion

10.	Number of ways of selecting 4 shoes from 10 pairs such that exactly onee correct pair is selected isA. ` .^(10)C_(1) .^(9)C_(2).2^(3)`B. ` .^(10)C_(1)xx9xx16`C. `(( .^(10)C_(1).^(4)P_(2).18xx16)/(4!))`D. `10xx18xx16`
Answer» Correct Answer - B::C Number of ways of selecting 1 pair from 10 pair is ` .^(10)C_(1)` number of ways of selecting 2 shoes from 18 shoes such that both are different is `(18xx16)/(2)`

Discussion

11.	FMCG stands for a. Fast Moving Consumer Goods b. First Moving Consumer Goods c. Fast Moving Customer Goods d. Frequent Moving Consumer Goods
Answer» Correct option: a. Fast Moving Consumer Goods

Discussion

12.	Consider the expansion of `(2x-1)^(15)`A. Algebraically least coefficient is `T_(5)`B. Algebraically greatest coefficient is `T_(5)`C. Numerically greatest coefficient is `T_(6)`D. Numerically least coefficient is `T_(16)`
Answer» Correct Answer - B::C::D `rle(n+1)/(1+\|(x)/(y)\|)` `rle(16)/(1+\|(2x)/(-1)\|)` `rle(16)/(3)=5` `impliesT_(6)` gives numerically greatest coefficient `T_(6)= .^(15)C_(5)(-1)^(5)(2)^(10)(x)^(10)` `N.G.C= .^(15)C_(5)(2)^(10)` `N.I.C=1` `A.L.C= .^(15)C_(4)(2)^(10)` `A.G.C= .^(15)C_(4)(2)^(11)`

Discussion

13.	What is Cut-Off Price? a. This issue price is called “Cut-Off Price” b. This below issue price is called “Cut-Off Price” c. This above issue price is called “Cut-Off Price” d. This negligible issue price is called “Cut-Off Price”
Answer» Correct answer is a. This issue price is called “Cut-Off Price”

Discussion

14.

Match the following:AB1) Stock1) Fixed Asset2) Copy right2) long term liability3) Land and building3) Intangible asset4) Creditors4) Current asset5) Loan against Land & Building5) Current Liability

Answer»

A	B
1) Stock	Current Asset
2) Copy right	intangible Asset
3) Land and building	Fixed Asset
4) Creditors	Current Liability
5) Loan against Land & Building	Long term liability

Discussion

15.	“Accounting gives number of advantages to the business”. What are the important advantages of accounting?
Answer» The following are the advantages of accounting 1. Provide Quantitative information: Accounting helps in gathering quantitative information on profits earned by the business or loss sustained by them. 2. Helps in ascertaining financial position of the business that is, total assets owned and total liabilities owed. 3. Helps in making a systematic record of transactions, which can be used for future reference and appropriate retrieval. 4. Acts as an information system: It provides adequate information to the interested users in a processed form. 5. Beneficial to different interested users of accounting information.

15.

“Accounting gives number of advantages to the business”. What are the important advantages of accounting?

Answer»

The following are the advantages of accounting

1. Provide Quantitative information:

Accounting helps in gathering quantitative information on profits earned by the business or loss sustained by them.

2. Helps in ascertaining financial position of the business that is, total assets owned and total liabilities owed.

3. Helps in making a systematic record of transactions, which can be used for future reference and appropriate retrieval.

4. Acts as an information system:

It provides adequate information to the interested users in a processed form.

5. Beneficial to different interested users of accounting information.

Discussion

16.	Consider the expansion of `(sqrt(x)-(2)/(x^(2)))^(16)`A. There is a term independent of xB. Coefficinet of `x^(3)=480`C. There is no term independent of xD. Coefficient of `x^(3)=240`
Answer» Correct Answer - B::C `(sqrt(x)-(2)/(x^(2)))^(16)` `T_(r+1)=` .^(16)C_(r)(-(2)/(x^(2)))^(r)(sqrt(x))^(16-r)` `T_(r+1)=` .^(16)C_(r)(-2)^(r)(x)^((16-5r)/(2))` (i). `(16-5r)/(2)=0` (2). For Coeff of `x^(3).16-5r=6` `r=2` `impliesr=(16)/(5)` `T_(3)= .^(16)C_(2)(-2)^(2)=480`

Discussion

17.	A _____ is a temperature controlled supply chain a. Cold supply chain b. CPG supply chain c. Dairy product supply chain d. CDIT supply chain
Answer» Correct option: a. Cold supply chain

Discussion

18.

Accounting and Book-keeping are viewed as distinct functions. Mention any four differences between Accounting and Book Keeping.

Answer»

Book - Keeping	Accounting
1. It is concerned with the presentation of primary books of accountancy	1. It deals with the recording, analysis and final interpretation of data.
2. It has limited scope	2. It has a wider scope.
3. In book-keeping, the level of work is less. This work is done by junior staff.	3. The level of work is high.
4. It does not show the net result and financial position of the business	4. It shows the profit of the business and the net worth of the business.

Discussion

19.	Accounting information must possess certain qualitative characteristics. What are they?
Answer» The following are the qualitative characteristic of accounting information. 1. Reliability: Accounting information will be reliable if it is free from error and faithfully represents what it seeks to represent. 2. Relevance: Information should be relevant and must be available in. time. 3. Understandability: Accounting information that is relevant must be capable of being understood by all its users. 4. Timeliness: Information must be available timely. If not, it loses its ability to influence decision. 5. Comparability: Accounting information should facilitate inter-firm comparison as well as interfirm comparison. Maximum Cputtishers

19.

Accounting information must possess certain qualitative characteristics. What are they?

Answer»

The following are the qualitative characteristic of accounting information.

1. Reliability: Accounting information will be reliable if it is free from error and faithfully represents what it seeks to represent.

2. Relevance: Information should be relevant and must be available in. time.

3. Understandability: Accounting information that is relevant must be capable of being understood by all its users.

4. Timeliness: Information must be available timely. If not, it loses its ability to influence decision.

5. Comparability: Accounting information should facilitate inter-firm comparison as well as interfirm comparison.
Maximum Cputtishers

Discussion

20.	Explain the concept and importance of social responsibility.
Answer» Social Responsibility means for every business as the objective of managers for taking decision related to business is not only to maximize profit or shareholder value but also to serve and protect the interest of other members of its society like consumer, worker and community as a whole. Social responsibility of business is important from the following point of view. 1. From employees’ point of view: with the help of companies’ employment and healthy working condition, social responsibility of business is important for employees. 2. From Customer point of view: under social responsibility, business follows ethical practice and manufactures the product which is as per expected quality and reasonable price. 3. From investor point of view: business who understand value of social responsibility is provide protection to the investor fund with help of development and growth of its business as well as expected return to investors with profit earn by it. 4. From Suppliers point of view: the importance of social responsibility is also require to perform in case of suppliers as they are one to provide raw material to business as well as other required material. When they are paid on time as well as reasonable demands of them are satisfied company, suppliers are loyal to business. 5. From government point of view: when business pay regular taxes, follow the norms of government then it is consider as social responsibility of business which is duly fulfill by it. 6. From Society point of view: business need to work in society, some importance of social responsibility is also define from society point of view. The business provide good product, try to maintain clean environment, provide opportunity to participate to business as well as work for the overall development of society, these are the some example of it.

20.

Explain the concept and importance of social responsibility.

Answer»

Social Responsibility means for every business as the objective of managers for taking decision related to business is not only to maximize profit or shareholder value but also to serve and protect the interest of other members of its society like consumer, worker and community as a whole.

Social responsibility of business is important from the following point of view.

1. From employees’ point of view: with the help of companies’ employment and healthy working condition, social responsibility of business is important for employees.

2. From Customer point of view: under social responsibility, business follows ethical practice and manufactures the product which is as per expected quality and reasonable price.

3. From investor point of view: business who understand value of social responsibility is provide protection to the investor fund with help of development and growth of its business as well as expected return to investors with profit earn by it.

4. From Suppliers point of view: the importance of social responsibility is also require to perform in case of suppliers as they are one to provide raw material to business as well as other required material. When they are paid on time as well as reasonable demands of them are satisfied company, suppliers are loyal to business.

5. From government point of view: when business pay regular taxes, follow the norms of government then it is consider as social responsibility of business which is duly fulfill by it.

6. From Society point of view: business need to work in society, some importance of social responsibility is also define from society point of view. The business provide good product, try to maintain clean environment, provide opportunity to participate to business as well as work for the overall development of society, these are the some example of it.

Discussion

21.	Let `I=int_(kpi)^((k+1)pi)(\|sin2x\|)/(\|sinx\|+\|cosx\|)dx,(kepsilonN)` and `J=int_(0)^((pi)/(4))(dx)/(sinx+cosx)` which of the following holds good?A. `I=2int_(0)^((pi)/(2))(sin2xdx)/(sinx+cosx)`B. `I=4-4J`C. `I=4-2J`D. `I=2-2J`
Answer» Correct Answer - A::B We have `I=int_(kpi)^((k+1)pi)(\|sin2x\|)/(\|sinx\|+\|cosx\|)dx` put `x=kpi+t` `impliesdx=dt` `I=int_(0)^(pi)(\|sin2x\|dx)/(\|sinx\|+\|cosx\|)=2int_(0)^((pi)/(2))(sin2xdx)/(sinx+cosx)` `=2int_(0)^((pi)/(2))((sinx+cosx)^(2)-1)/((sinx+cosx))dx` `2int_(0)^((pi)/(2))(sinx+cosx)dx-2int_(0)^((pi)/(2))(dx)/(sinx+cosx)` `=4-4int_(0)^((pi)/(4))(dx)/(sinx+cosx)=4-4J`

Discussion

22.	The concept of _________ refers to ascertainment of future value of present money. A. Time Preference of Money B. Discounting C. Compounding D. Interest
Answer» C. Compounding

Discussion

23.	Billing accuracy is the most important factor for a. Customer satisfaction b. Reseller satisfaction c. Purchase satisfaction d. None of the above
Answer» Correct option: a. Customer satisfaction

Discussion

24.	Which of the following is not an accounting concept a. Going concern concept b. Money measurement concept c. Consistency concept d. All of the above
Answer» Correct option: c. Consistency concept

Discussion

25.	`f(x)=min({x,x^(2)}` and `g(x)=max{x,x^(2)}`A. `int_(-1)^(1)f(x)=-(1)/(6)`B. `int_(-2)^(1)g(x)=(19)/(6)`C. `int_(-1)^(1)f(x)=(19)/(6)`D. `int_(-1)^(1)g(x)=-(1)/(6)`
Answer» Correct Answer - A::B `f(x)=min{x,x^(2)}` `g(x)=max(x,x^(2)}` `impliesf(x)={{:(x,xle0),(x^(2),00ltxne1),(x,-xgt1):}` and `{{:(x^(2),xle0),(x,0ltxne1),(x^(2),xgt1):}` (i). `int_(-1)^(1)f(x)=int_(-1)^(0)xdx+int_(0)^(1)xdx+int_(0)^(1)x^(2)dx` `=-(1)/(2)+(1)/(3)=-(1)/(6)` (ii). `int_(-2)^(1)g(x)=int_(-2)^(0)x^(2)dx+int_(0)^(1)xdx` `=(8)/(3)+(1)/(2)=(19)/(6)`

Discussion

26.	Which of the following statements regarding thin and thick cylinders, subjected to internal. pressure only, is/are correct? 1. A cylinder is considered thin when the ratio of its inner diameter to the wall thickness is less than 15. 2. In thick cylinders, tangential stress has highest magnitude at the inner surface of the cylinder and gradually decreases towards the outer surface. (a) 1 only (b) 2 only (c) Both 1 and 2 (d) Neither 1 nor 2
Answer» (d) Neither 1 nor 2

Discussion

27.	if `[{:(3,2),(7,5):}]A{:[(-1,1),(-2,1):}]={:[(2,-1),(0,4):}]` then trace of A is equal toA. `-11`B. `-21`C. `-25`D. `-15`
Answer» Correct Answer - B `becausePAQ=B` `AQ=P^(-1)B` `A=P^(-1)BQ^(1)` `[{:(-16,3),(24,-5):}]` `thereforetr(A)=-21`

Discussion

28.	Cosider :- `Urn-Ito3` black & 4 white balls `Urn-IIto2` white & 5 black balls Two balls is drawn from urm-I simultaneously and transferred to `urn-II` Now, a ball is drawn from `urn-II`, the probability that it is of white colour is `p` and that it is of black colour is q. Which of the following statements (s) is/are correct?A. `pgtq`B. `pltq`C. `41p=22q`D. `22p=41q`
Answer» Correct Answer - B::C `E_(1)to` Two white balls are tranferred `E_(2)to` Two black balls are transferred `E_(3)to` One white & one black ball is transferred `p=P(E_(1)).P(W\|E_(1))+P(E_(2)).P(W\|E_(2))+P(E_(2)).P(W\|E_(3))` `(( .^(4)C_(2))/( .^(7)C_(2)))((4)/(9))+(( .^(3)C_(2))/( .^(7)C_(2)))((2)/(9))+(( .^(4)C_(1) .^(3)C_(1))/( .^(7)C_(2)))((3)/(9))` `=((6)/(21))((4)/(9))+((3)/(21))((2)/(9))+((12)/(21))((3)/(9))` `=(24+6+36)/(186)=(66)/(189)` `q=P(E_(1)).P_(B\|E_(1))+P_(E_(2)).P_(B\|E_(2))+P(E_(3))P_(B\|E_(3))` `=(( .^(4)C_(2))/( .^(7)C_(2)))((5)/(9))+(( .^(3)C_(2))/( .^(7)C_(2)))((7)/(9))+(( .^(3)C_(1) .^(4)C_(1))/( .^(7)C_(2)))((6)/(9))` `=((6)/(21))((5)/(9))+((3)/(21))((7)/(9))+((12)/(21))((6)/(9))` `=(30+21+72)/(189)=(123)/(189)`

Discussion

29.	Consider `N=2520`A. Number of even divisors of N is 36B. Number of odd divisors of N is 11C. Number of divisors which are multiple of 10 is 18D. number of divisors which are multiple of 4 but not of 6 is 16
Answer» Correct Answer - A::C `N=2520=2^(3)xx3^(2)5xx7` (i) No. if even divisors`=(3)xx(3)xx(2)xx(2)=36` (ii). No. of odd divisors`=(3)xx(2)xx(2)=12` (iii). No. of divisors multiple of `10=(3)xx(3)xx(1)xx(2)=18` (iv). No. of divisors multiple of 4 but not `6=(2)xx(2)xx(2)=8`

Discussion

30.	Which of the following are the essential functions of fuel cells?'. 1. The charging (or electrolyser) function in which the chemical AB is decomposed to A and B. 2. The storage function in which A and B are held apart. . 3. The charge function in which A and B are charged with the simultaneous generation of electricity.(a) 1 and 3 only (b) 2 and 3 only (c) 1 and 2 only (d) 1, 2 and 3
Answer» (b) 2 and 3 only

Discussion

31.	The position of centroid can be determined by inspection, if an area has . (a) Single axis of symmetry (b) Two axes of symmetry (c) An irregular shape (d) Centre axes of symmetry
Answer» (b) Two axes of symmetry

Discussion

32.	Which of the following statements of D’Alembert’s principle are correct?. 1. The net external force F actually acting on the body and the inertia force FI together keep the body in a state of fictitious equilibrium. 2. The equation of motion may be written as F+ (– ma) = 0 and the fictitious force (– ma) is called an inertia force. 3. It tends to give solution of a static problem an appearance akin to that of a dynamic problem. (a) 1 and 3 only (b) 1 and 2 only (c) 2 and 3 only (d) 1, 2 and 3
Answer» (b) 1 and 2 only

Discussion

33.	The linear relationship between stress and strain for a bar in simple tension or compression. is expressed with standard notations by the equation (a) σ = Eε (b) σ = Eν (c) σ = Gν (d) σ = Gε
Answer» Correct option is (b) 219 MPa t = 8 mm d = 20 mm F = 110 kN F = K′(πdt) K′ = \(\cfrac{110\times1000}{8\times20\times\pi}\) = \(\cfrac{5500}{8\pi}\) = 218.94 ≈ 219 MPa

33.

The linear relationship between stress and strain for a bar in simple tension or compression. is expressed with standard notations by the equation (a) σ = Eε (b) σ = Eν (c) σ = Gν (d) σ = Gε

Answer»

Correct option is (b) 219 MPa

t = 8 mm

d = 20 mm

F = 110 kN

F = K′(πdt)

K′ = \(\cfrac{110\times1000}{8\times20\times\pi}\) = \(\cfrac{5500}{8\pi}\) = 218.94 ≈ 219 MPa

Discussion

34.	Let `A = {1,2,3,4,...,n}` be a set containing n elements, then for any given `k leqn`, the number of subsets of A having k as largest element must beA. `2^(k)`B. `2^(n-k)`C. `2^(k+1)`D. `2^(k-1)`
Answer» Correct Answer - D There are `(k-1)`

Discussion

35.	Consider the digits in set `S=(1,2,3,4)`. All four-digit number formed using digits in `S` are arranged ascending order. Which of the following is/are correct?A. The number 3412 is at 177 thB. the number 3423 is at 183th positionC. the number 3412 is at 178th positionD. the number at 110th position 2342
Answer» Correct Answer - B::C::D `S=(1,2,3,4)` `1---=64` `2----=64` `3,1---=16` `3,2---=16` ltbr. `3,3----=16` `3,4,1,1=1` `3 4 1 2` So, number 3412 is at `178^(th)` position. Similarly other options may be checked.

Discussion

36.	A rod of length 2 m and diameter 50 mm is elongated by 5 mm when an axial force. of 400 kN is applied. The modulus of elasticity of the material of the rod will be nearly (a) 66 GPa(b) 72 GPa (c) 82 GPa (d) 96 GPa
Answer» Correct option is (c) 82 GPa Axial elongation, ∆ = \(\cfrac{PL}{AE}\) E = \(\cfrac{PL}{A∆}\) = \(\cfrac{400\times10^3\times2\times10^3}{\cfrac{\pi}{4}(50)^2\times5}\) = 81.5 GPa

36.

A rod of length 2 m and diameter 50 mm is elongated by 5 mm when an axial force. of 400 kN is applied. The modulus of elasticity of the material of the rod will be nearly (a) 66 GPa(b) 72 GPa (c) 82 GPa (d) 96 GPa

Answer»

Correct option is (c) 82 GPa

Axial elongation, ∆ = \(\cfrac{PL}{AE}\)

E = \(\cfrac{PL}{A∆}\) = \(\cfrac{400\times10^3\times2\times10^3}{\cfrac{\pi}{4}(50)^2\times5}\) = 81.5 GPa

Discussion

37.	This section contains 1 paragraph. Based on paragraph, there are 3 questions. Each question has 4 choices (1), (2), (3), (4) out of which only one is correct Q. if `F(x)` is continuous at `x=+-1`, then `f(x)=g(x)` hasA. imaginary rootsB. both the roots positiveC. roots of opposite signD. both the roots negative.
Answer» Correct Answer - C `F(x)={{:(f(x),-1ltxlt1),(g(x),xge1orxlt-1),((f(-1)+g(-1))/(2),x=-1),((f(1)+g(1))/(2),x=1):}` for continuity at `x=1` `f(1)=g(1)=(f(1)+g(1))/(2)` `implies1+a+3=1+bimpliesb=a+3` Similarly we can check for other questions.

Discussion

38.	This section contains 1 paragraph. Based on paragraph, there are 3 questions. Each question has 4 choices (1), (2), (3), (4) out of which only one is correct Q. If `F(x)` is continuous at `x=-1`, thenA. `a+b=-2`B. `a-b=3`C. `a^(2)=b^(2)+5`D. `a+b=5`
Answer» Correct Answer - D

Discussion

39.	Which of the following are correct ?A. graph of `y=2^(log_(2)x)` is B. graph of `y=x^(log_(x)2)` is C. graph of `y=2^(log_(2)x^(2)` is D. graph of `y=2^(2log_(2)x)` is
Answer» Correct Answer - D

Discussion

40.	if `f(x)` is a differential function such that `f(x)=int_(0)^(x)(1+2xf(t))dt&f(1)=e`, then Q. Identify the correct statements (s):A. `f(x)` is an even functionB. `f(x)` is an odd functionC. `f(x)` is always increasing functionD. `f(x)` is always decreasing function
Answer» Correct Answer - B::C

Discussion

41.	Elaborate the abbreviations?
Answer» APB - Aadhaar Payment Bridge AEPS - Aadhaar Enabled Payment System PoS - Point of Sale e-FMS - Electronic Fund Management System CBS - Core Banking Solution JBY - Janashree Bima Yojana RSBY - Rashtriya Swasthya Bima Yojana

41.

Elaborate the abbreviations?

Answer»

APB - Aadhaar Payment Bridge

AEPS - Aadhaar Enabled Payment System

PoS - Point of Sale

e-FMS - Electronic Fund Management System

CBS - Core Banking Solution JBY - Janashree Bima Yojana

RSBY - Rashtriya Swasthya Bima Yojana

Discussion

42.	Is there any authentic document required to open the wage seeker account?
Answer» MGNREGS Job Card, duly signed by the concerned officer is an officially valid document for opening a bank account under the Know Your Customer (KYC) norms.

Discussion

43.	Let `f(x)` be a 4 egree polynomial satisfying `f(r)=(1)/(r)` for `r=1,2,3,4,5` then Q. Value of `f(6)` isA. 6B. `(1)/(6)`C. `(1)/(3)`D. `f(3)`
Answer» Correct Answer - C::D

Discussion

44.	Who is empowered to select the implementing Agency?
Answer» The selection of the implementing Agency, other than the GP will be done by the DPC which is based on their technical expertise, capacity to handle work with the framework of MGNREGA.

Discussion

45.	What is wage rate for women employed for providing child care services?
Answer» The women so employed should be paid remuneration equivalant to the prevailing wage rate.

Discussion

46.	Who decides regarding opening of account in post office / bank?
Answer» The choice among different service providers (commercial/scheduled banks/ RRBs/post offices/ mobile banks) is left to the decision of the wage seekers as per their convenience.

Discussion

47.	Who issues the muster rolls (MR) and how are they maintained at worksite?
Answer» As per Schedule I, Para 15, the muster rolls are to be maintained as given below: Every muster roll shall be signed by the authorised person of the Gram Panchayat or by the Programme Officer; and shall contain such mandatory information as may be specified by the Central Government; Each muster roll shall be in English or local language and have a unique identity number electronically generated by the computer system (e-Muster) along with the list of workers applied for work; Muster rolls shall be maintained at the worksite by marking attendance daily by a person authorised under the Scheme, details of which shall be made available in public view on a daily basis using the computer system; The muster roll shall be periodically checked by officials in the manner prescribed in the Scheme; The muster roll shall be closed on the last given day, countersigned by every worker who has worked, and shall be handed over to the technical personnel for measurement; A detailed record of muster rolls shall be maintained in the registers as specified from time to time; When a work is in progress, the workers engaged in that work may select from amongst themselves not less than five workers on a weekly rotational basis to verify and certify all the bills or vouchers of their worksite at least once in a week; Any person shall have access to muster rolls on the worksite on demand all days during all working hours.

47.

Who issues the muster rolls (MR) and how are they maintained at worksite?

Answer»

As per Schedule I, Para 15, the muster rolls are to be maintained as given below:

Every muster roll shall be signed by the authorised person of the Gram Panchayat or by the Programme Officer; and shall contain such mandatory information as may be specified by the Central Government;
Each muster roll shall be in English or local language and have a unique identity number electronically generated by the computer system (e-Muster) along with the list of workers applied for work;
Muster rolls shall be maintained at the worksite by marking attendance daily by a person authorised under the Scheme, details of which shall be made available in public view on a daily basis using the computer system;
The muster roll shall be periodically checked by officials in the manner prescribed in the Scheme;
The muster roll shall be closed on the last given day, countersigned by every worker who has worked, and shall be handed over to the technical personnel for measurement;
A detailed record of muster rolls shall be maintained in the registers as specified from time to time;
When a work is in progress, the workers engaged in that work may select from amongst themselves not less than five workers on a weekly rotational basis to verify and certify all the bills or vouchers of their worksite at least once in a week;
Any person shall have access to muster rolls on the worksite on demand all days during all working hours.

Discussion

48.	List out the details to be recorded while generating e-muster?
Answer» For generating e-muster following details are required to be filled: i) Panchayat name ii) Work Code iii) Date from………Date to……….. iv) Worker category (unskilled or skilled/ semi-skilled) v) Number of workers in one muster roll

48.

List out the details to be recorded while generating e-muster?

Answer»

For generating e-muster following details are required to be filled:

i) Panchayat name

ii) Work Code

iii) Date from………Date to………..

iv) Worker category (unskilled or skilled/ semi-skilled)

v) Number of workers in one muster roll

Discussion

49.

List out the details to be entered in NREGASoft while issuing the paper muster roll?

Answer»

The fields required to be entered in NREGASoft for issuance of a paper muster roll are as below:

a. Panchayat name

b. Worker category (unskilled or skilled/semi-skilled)

c. Muster roll No. (from & to)

d. Work Code

e. Date of issuance (by Programme Officer)

f. Number of labour in muster roll

g. Received by whom

h. Date of the receipt.

Discussion

50.	What is the motto of conducting project initiation meeting?
Answer» To inform workers about the provisions of the Act, the system of payment of wages, SoR, information on worksite facilities and their entitlements in the event of their injury by accidents or death or injury or death of any child accompanying the worker.

Discussion

Explore topic-wise InterviewSolutions in Current Affairs.

Which of the following is a stage of innovation ?(A) Identification of business idea (B) Business planning(C) Formation of project report (D) All of the above

If error in the masurement of mass is `0.8` of and in volume it is `0.4%` then error in the measurement of density isA. `1.2%`B. `0.4%`C. `0.8%`D. `1%`

An object O is located 40cm from the first of two thin converging lenses (each of focal length 20cm), as shown in the figure below. If speed of the right lens is `7cm//s` rightwards, speed of final image is `7x//4cm//s` at the instant shown, find the value of x.

The reactivity of alkyl halides for Wurtz reaction is:A. (a)`1^(@)gt 2^(@)gt 3^(@)`B. (b)`3^(@)gt 2^(@)gt 1^(@)`C. (c )`2^(@)gt 3^(@)gt 1^(@)`D. (d)`1^(@)gt 3^(@)gt 2^(@)`

Number of ways of selecting 4 shoes from 10 pairs such that exactly onee correct pair is selected isA. ` .^(10)C_(1) .^(9)C_(2).2^(3)`B. ` .^(10)C_(1)xx9xx16`C. `(( .^(10)C_(1).^(4)P_(2).18xx16)/(4!))`D. `10xx18xx16`

FMCG stands for a. Fast Moving Consumer Goods b. First Moving Consumer Goods c. Fast Moving Customer Goods d. Frequent Moving Consumer Goods

Consider the expansion of `(2x-1)^(15)`A. Algebraically least coefficient is `T_(5)`B. Algebraically greatest coefficient is `T_(5)`C. Numerically greatest coefficient is `T_(6)`D. Numerically least coefficient is `T_(16)`

What is Cut-Off Price? a. This issue price is called “Cut-Off Price” b. This below issue price is called “Cut-Off Price” c. This above issue price is called “Cut-Off Price” d. This negligible issue price is called “Cut-Off Price”

Match the following:AB1) Stock1) Fixed Asset2) Copy right2) long term liability3) Land and building3) Intangible asset4) Creditors4) Current asset5) Loan against Land & Building5) Current Liability

“Accounting gives number of advantages to the business”. What are the important advantages of accounting?

Consider the expansion of `(sqrt(x)-(2)/(x^(2)))^(16)`A. There is a term independent of xB. Coefficinet of `x^(3)=480`C. There is no term independent of xD. Coefficient of `x^(3)=240`

A _____ is a temperature controlled supply chain a. Cold supply chain b. CPG supply chain c. Dairy product supply chain d. CDIT supply chain

Accounting and Book-keeping are viewed as distinct functions. Mention any four differences between Accounting and Book Keeping.

Accounting information must possess certain qualitative characteristics. What are they?

Explain the concept and importance of social responsibility.

Let `I=int_(kpi)^((k+1)pi)(|sin2x|)/(|sinx|+|cosx|)dx,(kepsilonN)` and `J=int_(0)^((pi)/(4))(dx)/(sinx+cosx)` which of the following holds good?A. `I=2int_(0)^((pi)/(2))(sin2xdx)/(sinx+cosx)`B. `I=4-4J`C. `I=4-2J`D. `I=2-2J`

The concept of _________ refers to ascertainment of future value of present money. A. Time Preference of Money B. Discounting C. Compounding D. Interest

Billing accuracy is the most important factor for a. Customer satisfaction b. Reseller satisfaction c. Purchase satisfaction d. None of the above

Which of the following is not an accounting concept a. Going concern concept b. Money measurement concept c. Consistency concept d. All of the above

`f(x)=min({x,x^(2)}` and `g(x)=max{x,x^(2)}`A. `int_(-1)^(1)f(x)=-(1)/(6)`B. `int_(-2)^(1)g(x)=(19)/(6)`C. `int_(-1)^(1)f(x)=(19)/(6)`D. `int_(-1)^(1)g(x)=-(1)/(6)`

if `[{:(3,2),(7,5):}]A{:[(-1,1),(-2,1):}]={:[(2,-1),(0,4):}]` then trace of A is equal toA. `-11`B. `-21`C. `-25`D. `-15`

Consider `N=2520`A. Number of even divisors of N is 36B. Number of odd divisors of N is 11C. Number of divisors which are multiple of 10 is 18D. number of divisors which are multiple of 4 but not of 6 is 16

The position of centroid can be determined by inspection, if an area has . (a) Single axis of symmetry (b) Two axes of symmetry (c) An irregular shape (d) Centre axes of symmetry

The linear relationship between stress and strain for a bar in simple tension or compression. is expressed with standard notations by the equation (a) σ = Eε (b) σ = Eν (c) σ = Gν (d) σ = Gε

Let `A = {1,2,3,4,...,n}` be a set containing n elements, then for any given `k leqn`, the number of subsets of A having k as largest element must beA. `2^(k)`B. `2^(n-k)`C. `2^(k+1)`D. `2^(k-1)`

A rod of length 2 m and diameter 50 mm is elongated by 5 mm when an axial force. of 400 kN is applied. The modulus of elasticity of the material of the rod will be nearly (a) 66 GPa(b) 72 GPa (c) 82 GPa (d) 96 GPa

This section contains 1 paragraph. Based on paragraph, there are 3 questions. Each question has 4 choices (1), (2), (3), (4) out of which only one is correct Q. If `F(x)` is continuous at `x=-1`, thenA. `a+b=-2`B. `a-b=3`C. `a^(2)=b^(2)+5`D. `a+b=5`

Which of the following are correct ?A. graph of `y=2^(log_(2)x)` is B. graph of `y=x^(log_(x)2)` is C. graph of `y=2^(log_(2)x^(2)` is D. graph of `y=2^(2log_(2)x)` is

if `f(x)` is a differential function such that `f(x)=int_(0)^(x)(1+2xf(t))dt&f(1)=e`, then Q. Identify the correct statements (s):A. `f(x)` is an even functionB. `f(x)` is an odd functionC. `f(x)` is always increasing functionD. `f(x)` is always decreasing function

Elaborate the abbreviations?

Is there any authentic document required to open the wage seeker account?

Let `f(x)` be a 4 egree polynomial satisfying `f(r)=(1)/(r)` for `r=1,2,3,4,5` then Q. Value of `f(6)` isA. 6B. `(1)/(6)`C. `(1)/(3)`D. `f(3)`

Who is empowered to select the implementing Agency?

What is wage rate for women employed for providing child care services?

Who decides regarding opening of account in post office / bank?

Who issues the muster rolls (MR) and how are they maintained at worksite?

List out the details to be recorded while generating e-muster?

List out the details to be entered in NREGASoft while issuing the paper muster roll?

What is the motto of conducting project initiation meeting?

Explore topic-wise InterviewSolutions in Current Affairs.

Which of the following is a stage of innovation ?(A) Identification of business idea (B) Business planning(C) Formation of project report (D) All of the above

If error in the masurement of mass is `0.8` of and in volume it is `0.4%` then error in the measurement of density isA. `1.2%`B. `0.4%`C. `0.8%`D. `1%`

An object O is located 40cm from the first of two thin converging lenses (each of focal length 20cm), as shown in the figure below. If speed of the right lens is `7cm//s` rightwards, speed of final image is `7x//4cm//s` at the instant shown, find the value of x.

The reactivity of alkyl halides for Wurtz reaction is:A. (a)`1^(@)gt 2^(@)gt 3^(@)`B. (b)`3^(@)gt 2^(@)gt 1^(@)`C. (c )`2^(@)gt 3^(@)gt 1^(@)`D. (d)`1^(@)gt 3^(@)gt 2^(@)`

Number of ways of selecting 4 shoes from 10 pairs such that exactly onee correct pair is selected isA. ` .^(10)C_(1) .^(9)C_(2).2^(3)`B. ` .^(10)C_(1)xx9xx16`C. `(( .^(10)C_(1).^(4)P_(2).18xx16)/(4!))`D. `10xx18xx16`

FMCG stands for a. Fast Moving Consumer Goods b. First Moving Consumer Goods c. Fast Moving Customer Goods d. Frequent Moving Consumer Goods

Consider the expansion of `(2x-1)^(15)`A. Algebraically least coefficient is `T_(5)`B. Algebraically greatest coefficient is `T_(5)`C. Numerically greatest coefficient is `T_(6)`D. Numerically least coefficient is `T_(16)`

What is Cut-Off Price? a. This issue price is called “Cut-Off Price” b. This below issue price is called “Cut-Off Price” c. This above issue price is called “Cut-Off Price” d. This negligible issue price is called “Cut-Off Price”

Match the following:AB1) Stock1) Fixed Asset2) Copy right2) long term liability3) Land and building3) Intangible asset4) Creditors4) Current asset5) Loan against Land &amp; Building5) Current Liability

“Accounting gives number of advantages to the business”. What are the important advantages of accounting?

Consider the expansion of `(sqrt(x)-(2)/(x^(2)))^(16)`A. There is a term independent of xB. Coefficinet of `x^(3)=480`C. There is no term independent of xD. Coefficient of `x^(3)=240`

A _____ is a temperature controlled supply chain a. Cold supply chain b. CPG supply chain c. Dairy product supply chain d. CDIT supply chain

Accounting and Book-keeping are viewed as distinct functions. Mention any four differences between Accounting and Book Keeping.

Accounting information must possess certain qualitative characteristics. What are they?

Explain the concept and importance of social responsibility.

Let `I=int_(kpi)^((k+1)pi)(|sin2x|)/(|sinx|+|cosx|)dx,(kepsilonN)` and `J=int_(0)^((pi)/(4))(dx)/(sinx+cosx)` which of the following holds good?A. `I=2int_(0)^((pi)/(2))(sin2xdx)/(sinx+cosx)`B. `I=4-4J`C. `I=4-2J`D. `I=2-2J`

The concept of _________ refers to ascertainment of future value of present money. A. Time Preference of Money B. Discounting C. Compounding D. Interest

Billing accuracy is the most important factor for a. Customer satisfaction b. Reseller satisfaction c. Purchase satisfaction d. None of the above

Which of the following is not an accounting concept a. Going concern concept b. Money measurement concept c. Consistency concept d. All of the above

`f(x)=min({x,x^(2)}` and `g(x)=max{x,x^(2)}`A. `int_(-1)^(1)f(x)=-(1)/(6)`B. `int_(-2)^(1)g(x)=(19)/(6)`C. `int_(-1)^(1)f(x)=(19)/(6)`D. `int_(-1)^(1)g(x)=-(1)/(6)`

if `[{:(3,2),(7,5):}]A{:[(-1,1),(-2,1):}]={:[(2,-1),(0,4):}]` then trace of A is equal toA. `-11`B. `-21`C. `-25`D. `-15`

Consider `N=2520`A. Number of even divisors of N is 36B. Number of odd divisors of N is 11C. Number of divisors which are multiple of 10 is 18D. number of divisors which are multiple of 4 but not of 6 is 16

The position of centroid can be determined by inspection, if an area has . (a) Single axis of symmetry (b) Two axes of symmetry (c) An irregular shape (d) Centre axes of symmetry

The linear relationship between stress and strain for a bar in simple tension or compression. is expressed with standard notations by the equation (a) σ = Eε (b) σ = Eν (c) σ = Gν (d) σ = Gε

Let `A = {1,2,3,4,...,n}` be a set containing n elements, then for any given `k leqn`, the number of subsets of A having k as largest element must beA. `2^(k)`B. `2^(n-k)`C. `2^(k+1)`D. `2^(k-1)`

A rod of length 2 m and diameter 50 mm is elongated by 5 mm when an axial force. of 400 kN is applied. The modulus of elasticity of the material of the rod will be nearly (a) 66 GPa(b) 72 GPa (c) 82 GPa (d) 96 GPa

This section contains 1 paragraph. Based on paragraph, there are 3 questions. Each question has 4 choices (1), (2), (3), (4) out of which only one is correct Q. If `F(x)` is continuous at `x=-1`, thenA. `a+b=-2`B. `a-b=3`C. `a^(2)=b^(2)+5`D. `a+b=5`

Which of the following are correct ?A. graph of `y=2^(log_(2)x)` is B. graph of `y=x^(log_(x)2)` is C. graph of `y=2^(log_(2)x^(2)` is D. graph of `y=2^(2log_(2)x)` is

if `f(x)` is a differential function such that `f(x)=int_(0)^(x)(1+2xf(t))dt&f(1)=e`, then Q. Identify the correct statements (s):A. `f(x)` is an even functionB. `f(x)` is an odd functionC. `f(x)` is always increasing functionD. `f(x)` is always decreasing function

Elaborate the abbreviations?

Is there any authentic document required to open the wage seeker account?

Let `f(x)` be a 4 egree polynomial satisfying `f(r)=(1)/(r)` for `r=1,2,3,4,5` then Q. Value of `f(6)` isA. 6B. `(1)/(6)`C. `(1)/(3)`D. `f(3)`

Who is empowered to select the implementing Agency?

What is wage rate for women employed for providing child care services?

Who decides regarding opening of account in post office / bank?

Who issues the muster rolls (MR) and how are they maintained at worksite?

List out the details to be recorded while generating e-muster?

List out the details to be entered in NREGASoft while issuing the paper muster roll?

What is the motto of conducting project initiation meeting?

Match the following:AB1) Stock1) Fixed Asset2) Copy right2) long term liability3) Land and building3) Intangible asset4) Creditors4) Current asset5) Loan against Land & Building5) Current Liability