Seat reference point is the point where?(a) Seat pan meets the back(b) Pilot head is located(c) Lift is concentrated(d) Weight is carried out in cockpitThis question was addressed to me in class test.My enquiry is from Crew Station in chapter Crew Station, Passengers, and Payload of Aircraft Design

Seat reference point is the point where?(a) Seat pan meets the back(b)

1.	Seat reference point is the point where?(a) Seat pan meets the back(b) Pilot head is located(c) Lift is concentrated(d) Weight is carried out in cockpitThis question was addressed to me in class test.My enquiry is from Crew Station in chapter Crew Station, Passengers, and Payload of Aircraft Design
Answer» The correct choice is (a) Seat PAN meets the back To explain I would SAY: The point at where seat pan meets back is termed as seat reference point. It can be used to define fundamental terms in COCKPIT design. Legroom requirement, HEIGHT etc. are using seat reference point as a reference.

Discussion

No Comment Found

Related InterviewSolutions

If weapon is mounted at bottom of the fuselage then it is called __________(a) internal carriage(b) external always(c) conformal(d) rail launch system alwaysThis question was posed to me in an interview for job.This interesting question is from Payload topic in section Crew Station, Passengers, and Payload of Aircraft Design
Which of the following is a disadvantage of semi-submerged weapon carriage?(a) Indentation will increase structural weight in this type of weapon carriage(b) Lowest possible weight(c) Drag will be more than external carriage(d) Drag will be lower than that of the external carriageThis question was posed to me during an online interview.I'd like to ask this question from Payload in section Crew Station, Passengers, and Payload of Aircraft Design
Which of the following is correct?(a) Vision requirements will be used to determine location of cockpit(b) Crew station design is based on lift only(c) Cockpit design is not affected by visual requirements(d) Weight will be always same as liftThis question was posed to me during an online exam.My question is based upon Crew Station topic in chapter Crew Station, Passengers, and Payload of Aircraft Design
The term indicated by ‘?’ in following diagram _________(a) aisle width(b) aisle length(c) fuselage length(d) headroomThe question was posed to me in homework.Query is from Passenger Compartment in section Crew Station, Passengers, and Payload of Aircraft Design
What is the headroom?(a) Vertical distance from the floor to the roof cover seat(b) Height of seat(c) Height of seat measured height of next respective seat(d) Length of one seat plus height of seatThe question was posed to me in an internship interview.I'd like to ask this question from Passenger Compartment topic in chapter Crew Station, Passengers, and Payload of Aircraft Design
Which of the following is correct?(a) Missile can be launched in two ways typically(b) Missile are always free fall(c) Bombs are always guided(d) All Missile and bombs adopt similar launching mechanismThis question was addressed to me in unit test.The origin of the question is Payload in portion Crew Station, Passengers, and Payload of Aircraft Design
Which weapon carriage option gives more flexibility to carry different weapons?(a) Internal carriage(b) External carriage(c) Conformal(d) Rail launch system alwaysI had been asked this question in quiz.This intriguing question originated from Payload in portion Crew Station, Passengers, and Payload of Aircraft Design
Which of the following is an advantage of internal weapon carriage?(a) Weapon RCS will tend to be none(b) Highest possible RCS(c) RCS is more than external(d) RCS is more than conformalThis question was addressed to me in my homework.I would like to ask this question from Payload in division Crew Station, Passengers, and Payload of Aircraft Design
Higher seat back angle (>60°) will result in __________(a) improvement to withstand high- g loads(b) drag increment(c) outside vision improvement(d) maximum dragThis question was posed to me during an interview for a job.The doubt is from Crew Station in chapter Crew Station, Passengers, and Payload of Aircraft Design
Following diagram represents ___________(a) rail launch system(b) free falling(c) longerons(d) lofting processThe question was posed to me during an online exam.My doubt stems from Payload in chapter Crew Station, Passengers, and Payload of Aircraft Design

Seat reference point is the point where?(a) Seat pan meets the back(b) Pilot head is located(c) Lift is concentrated(d) Weight is carried out in cockpitThis question was addressed to me in class test.My enquiry is from Crew Station in chapter Crew Station, Passengers, and Payload of Aircraft Design

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment