InterviewSolution
Saved Bookmarks
InterviewSolution
| 1. |
Solve : help with installation of dvd rewriter? |
|
Answer» I would like to install a dvd rewriter, but I have limited knowledge and experience of how to install one or how to use it after installed. Let's start by finding out some details about the machine, operating system, what drives are in there now, etc. The operating system is Windows XP, it has an LG CD/DVD player, an A-Open disk rewriter 48 x 12 x 50, is there anything else would you like to know TomOpen the case/side panel of the machine. Make sure you have dis-connected the power source.There will be 2 flat ribbon cables coming from the MBoard one to the Hard drive and the other to a CD drive if you have one. Use the CD / empty one not the HDD one. Mount the drive using the screws provided. The ribbon cable has a tab on one side this goes towards the TOP of the drive. Make sure it is seated firmly. The second connector is called a Molex and supplies power to the unit. It is a 4 pin connector and is flat on one side. The flat side goes TOWARD the bottom of the burner. Make sure this is seated firmly as well. For now LEAVE the side cover/case off to make sure things run properly. Plug in the power and turn the machine on. hit the power switch on the burner and put a data CD in and open Windows Explorer. If you are able to see the contents of the data CD then congratulations you have done everything properly ! Replace your case/side panel and Happy Burning !Thank you Egghead for the infomation, even with my limited experience I understand what you said.Who is Egghead? Patio (Egghead)Quote Patio (Egghead) I was just trying to get the OP straightened out. I know if I'm around long enough that'll happen to my head too. :-? You may be well on your way already....How and when did i become an egghead ? ? I thought that designation belonged exclusively to the Coroner... All HAIL the Coroner... Ommmmmmmmmmmm |
|