Hi,

I turned on my pc today and nothing loads. I see the pentium screen for one second and then it goes to this screen (photos).

http://www.bosdenhost.com/P1010037.JPG

http://www.bosdenhost.com/P1010036.JPG

It just stays on this screen and nothing happens. If anyone has any idea what is wrong and can GIVE me some advice I would be very appreciative.

Thanks,

TamekNot nearly enough info given.
Is this an IDE or a SATA/RAID/SCSI setup? I note from the pics that there are no secondary IDE devices.Everything is still connected fine i havent been inside it.

I LEFT the pc on overnight logged in and i think at some point it reset itself and loaded as far as the login screen and stayed on the screen for some hours. When i woke up I turned it off without logging in.

Then when i turned it on an hour or so later the problem started. my hard DRIVE is connected by sata if thats of any relevance. TWO cd/dvd drives are connected by ide.

- its pentium 4 3.6ghz
- 512 ram
-
The problem is that these PICTURES don't really show anything. Enter your BIOS and ensure that the SATA array is enabled and that the computer is set to boot from it.