My computer doesn't detect my video card (ATI radeon x800 xt), my monitor (dell m993c), or my network adapter. My system recently crashed, because one of the DRIVES in the RAID 1 array failed. I had to do a repair installation of Win XP. Now that I have an OS up, I found many software and device malfunctions.

I found the following hardware conflicts in my system INFORMATION:

IRQ 4 Intel(R) 925X/XE PCI Express Root PORT - 2585
IRQ 4 Intel(R) 537EP V9x DF PCI Modem #2
IRQ 4 Communications Port (COM1)

I/O Port 0x000003C0-0x000003DF VgaSave
I/O Port 0x000003C0-0x000003DF Intel(R) 925X/XE PCI Express Root Port - 2585

Memory Address 0xFEDA0000-0xFEDFFFFF PCI bus
Memory Address 0xFEDA0000-0xFEDFFFFF Motherboard resources

IRQ 8 Creative SB Audigy 2 ZS (WDM)
IRQ 8 System CMOS/real time clock

Memory Address 0xA0000-0xBFFFF VgaSave
Memory Address 0xA0000-0xBFFFF Intel(R) 925X/XE PCI Express Root Port - 2585

I/O Port 0x000003B0-0x000003BB VgaSave
I/O Port 0x000003B0-0x000003BB Intel(R) 925X/XE PCI Express Root Port - 2585

IRQ 116 Intel(R) 82801FB/FBM USB Universal Host Controller - 2658
IRQ 116 Intel(R) 82801FB/FBM USB2 Enhanced Host Controller - 265C

Under problem devices in system information, I get the following:

Intel(R) 82801FB/FBM PCI Express Root Port - 2660
PNP Device ID: PCI\VEN_8086&DEV_2660&SUBSYS_00000000&REV_03\2&EBB567F&0&E0
Error code: 35

Intel(R) 82801FB/FBM PCI Express Root Port - 2662
PNP Device ID: PCI\VEN_8086&DEV_2662&SUBSYS_00000000&REV_03\2&EBB567F&0&E1
Error Code: 35

Intel(R) 925X/XE PCI Express Root Port - 2585
PNP Device ID: PCI\VEN_8086&DEV_2585&SUBSYS_00000000&REV_04\2&EBB567F&0&08
Error Code: 35

I tried removing the video card from its slot in the motherboard and reinserting it, but that didn't work. I think it's an OS problem.

How do I get my computer to recognize these devices? Help please. Really only one thread is REQUIRED and you have responses in the other, so I will lock this one.