The ammeter, voltmeter and, resistors R_(1) and R_(2) connected in the circuit as shown below have been checked and found to be correct. On plugging the key, the voltmeter reads 4.5 V but the ammeter reads 1.5 A. This is most likely because the wires joined to :

The ammeter, voltmeter and, resistors R_(1) and R_(2) connected in the

1.	The ammeter, voltmeter and, resistors R_(1) and R_(2) connected in the circuit as shown below have been checked and found to be correct. On plugging the key, the voltmeter reads 4.5 V but the ammeter reads 1.5 A. This is most likely because the wires joined to :
Answer» resistor `R_(1)` are loose resistor `R_(2)` are loose both the RESISTORS `R_(1)` and `R_(2)` are loose ammeter terminals are loose Solution :NA