Consider an extended object immersed in water contained in a plane through. When seen from close to the edge of the through, the object looks distorted because.A. the apparent depth of the points close the egde are nearer the surface of the water compared to the points away from the edge.B. the angle subtended by the image of the object at the eye is smaller than the actual angle subtended by the object in air.C. some of the points of the object far away from the edge may not be visible because of total internal reflection.D. water in a trough acts as a lens and magnifies the object.

Consider an extended object immersed in water contained in a plane thr

1.	Consider an extended object immersed in water contained in a plane through. When seen from close to the edge of the through, the object looks distorted because.A. the apparent depth of the points close the egde are nearer the surface of the water compared to the points away from the edge.B. the angle subtended by the image of the object at the eye is smaller than the actual angle subtended by the object in air.C. some of the points of the object far away from the edge may not be visible because of total internal reflection.D. water in a trough acts as a lens and magnifies the object.
Answer» Correct Answer - A::B::C Here, an extended object lies immersed in water contained in a plane trough. When seen from close to the edge of the trough, the object looks distorted on account of refraction of light from denser to rarer medium, Therefore, apparent depths of the points close to the egde and nearer to the surface of water is more compared to points away from the edge. Further, the angle subtended by the image of the object at the eye is smaller than the actual angle subtended by the object in air. Again, some of the points of the object, far away from the edge may not be visible because of total internal reflection. The choices (a), (b), (c ) are correct.

Discussion

No Comment Found

Related InterviewSolutions

Red light of wavelength `6500 Å` from a distant source falls on a slit `0.50 mm` wide. Calculate the distance between first two dark bands on each side of central bright band in the diffraction pattern observed on a screen placed `1.8 m` from the slit.
The ratio of the intensity at the centre of a bright fringe to the intensity at a point one-quarter of the distance between two fringe from the centre is
The ratio of the intensity at the centre of a bright fringe to the intensity at a point one-quarter of the distance between two fringe from the centre isA. `2`B. `1//2`C. `4`D. `16`
Among the two interfering monochromatic sources A and B, A is ahead of B in phase by `66^@`. If the observation be taken from point P, such that `PB-PA=lambda//4`. Then the phase difference between the waves from A and B reaching P isA. `156^(@)`B. `140^(@)`C. `136^(@)`D. `126^(@)`
The radius of curvature of curved surface of a thin plano-convex lens is `10 cm` and the refractive index is `1.5`. If the plano surface is silvered, then the focal length will be.A. 15 cmB. 20 cmC. 5 cmD. 10 cm
Calculate the resolving power of a microscope with cone angle of light falling on the objective equal to `60^(@)`. Take `lambda = 600 nm mu` for air `= 1`.
The diameter of the pupil of human eye is about `2 mm`. Human eye is most sensitive to the wavelength `555 nm`. Find the limit of resolution of human eye.
Assume that light of wavelength `6000 Å` is coming from a star. What is the limit of resolution of a telescope whose objective has a diameter of 100 inch ? (NCERT Solved example)
A central fringe of interference pattern produced by light of wavelength `6000 Å` is shifted to the position of 5th bright fringe by introducing thin film of `mu = 1.5`. Calculate thickness of the film.
Laser light of wavelength `630 nm` incident on a pair of slits produces an interference pattern where bright fringes are separated by `8.1 mm`. Another light produces the interference pattern, where the bright fringes are separated by `7.2 mm`. Calculate the wavelength of second light.

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment