I have a small dilemma.

I have Vyatta 6.1 and I have NO IDEA how to use it.

I have to use it to COMPLETE an assessment so it's vital that i use it.

I am running on VirtualBox 4.1.0

I have got:

Ser 1: ACTIVE Directory 1
Ser2: Active Directory 2
(Ser 1 and 2 replicate)
Ser 3: Radius 1
Ser 4: Radius 2
Ser 5: IIS (Web Server)
(All servers are Windows Server 2008 R1 x84)
Vyatta
Windows 7 WS (Windows 7 x64)

These are all VIRTUAL Machines

What I need is VPN from WS1 to DMZ Radius Server 1 or 2
Then from Radius server 1 or 2 authenticate against the Active Directory. But not authenticate on the AD server itself, (Confusing i know).
Is there any way to replicate Radius server 1 and 2?
DNS is installed on AD1 and AD2


The image that is attached is a very rough copy of what i need.

I need to configure Vyatta to allow traffic from the Radius servers to the AD servers to authenticate
i need to also configure the ports that are open on Vyatta.

Any help would be greatly appreciated.

Thanks

..::Merlyn::..





[regaining space - attachment deleted by admin]BUMPIP addresses are as follows:

Active Directory 1: 192.168.1.1
Active Directory 2: 192.168.1.2
Radius 1: 192.168.2.1
Radius 2: 192.168.2.2
IIS: 192.168.2.8
Vyatta (Eth0) - 192.168.1.5/24
(Eth1) - 192.168.2.5/24
Windows 7: 192.168.1.11
Wow, Vyatta. I had a play with that a couple of years ago. Very impressive. Cisco-like command line interface.

If I recall correctly, the beta I used didn't yet have the web interface ready. If I were you, I would look to get the web interface up and running, ASSUMING it's available in 6.1. What previews I saw of the web interface, it looked much more intuitive (if you're familiar with application firewall admin) than the command line.

Just curious: why have you been put in the position of having to use a tool you've not been trained to use?