What is the unit of diffusion flux “J” in the Fick’s law equation?(a) mol m^−2 s^−1(b) mol m^2 s^−1(c) mol m^2 s^1(d) mol m^−2 s^1This question was addressed to me in my homework.My doubt stems from Molecular Diffusion topic in chapter Mass Transfer of Bioprocess Engineering

What is the unit of diffusion flux “J” in the Fick’s law equatio

1.	What is the unit of diffusion flux “J” in the Fick’s law equation?(a) mol m^−2 s^−1(b) mol m^2 s^−1(c) mol m^2 s^1(d) mol m^−2 s^1This question was addressed to me in my homework.My doubt stems from Molecular Diffusion topic in chapter Mass Transfer of Bioprocess Engineering
Answer» Right CHOICE is (a) mol m^−2 s^−1 Explanation: J is the “diffusion flux,” of which the dimension is amount of substance per unit area per unit time, so it is expressed in such UNITS as mol m^−2 s^−1. J MEASURES the amount of substance that will flow through a unit area during a unit time INTERVAL.

Discussion

No Comment Found

Related InterviewSolutions

The value of Henry’s law constant increases with increasing temperature?(a) True(b) FalseI got this question in homework.My question is based upon Estimating Oxygen Solubility topic in division Mass Transfer of Bioprocess Engineering
Refer to Q14 and, Calculate the solubility of oxygen in units of grams of oxygen per liter of water.(a) 0.0080 g/L(b) 0.0082 g/L(c) 0.0083 g/L(d) 0.0085 g/LI have been asked this question in class test.The doubt is from Estimating Oxygen Solubility in division Mass Transfer of Bioprocess Engineering
Bubble column reactor cannot be used for?(a) Low viscous medium(b) High viscous medium(c) Liquid state medium(d) Solid state mediumI got this question in a job interview.My question is from Oxygen Transfer in Fermenters topic in section Mass Transfer of Bioprocess Engineering
Beer may be produced by ________________(a) Fermentation of rice(b) Germination of rice(c) Germination of barley(d) Fermentation of grapesThis question was posed to me during an internship interview.The above asked question is from Oxygen Uptake in Cell Cultures in chapter Mass Transfer of Bioprocess Engineering
The lowest yield of ATP is in ____________(a) Aerobic respiration(b) Aerobic fermentation(c) Anaerobic respiration(d) FermentationThe question was asked by my college professor while I was bunking the class.This key question is from Oxygen Uptake in Cell Cultures in portion Mass Transfer of Bioprocess Engineering
In the two-phase aqueous systems, in ordinary situations the bulk phases are not in equilibrium?(a) True(b) FalseThis question was posed to me during an online interview.I need to ask this question from Convective Mass Transfer topic in section Mass Transfer of Bioprocess Engineering
In the below equation, what does “D” represents?(a) Length of the membrane(b) Distance(c) Diffusion(d) Thickness of the membraneThe question was posed to me by my college director while I was bunking the class.My query is from Role of Diffusion in Bioprocessing topic in portion Mass Transfer of Bioprocess Engineering
Diffusion maintains the concentration difference between high and low concentrations.(a) True(b) FalseI have been asked this question in my homework.Question is taken from Role of Diffusion in Bioprocessing topic in division Mass Transfer of Bioprocess Engineering
Speed is the factor affecting the value of kLa.(a) True(b) FalseThis question was addressed to me by my college director while I was bunking the class.I want to ask this question from Measurement of KLa topic in section Mass Transfer of Bioprocess Engineering
The pH of water sample collected from a river was found to be acidic in the range of 3.5 – 4.5. On the banks of the river were several factories that were discharging effluents into the river. The effluents of which one of the following factories is the most likely cause for lowering the pH of river water?(a) Soap factory(b) Detergent factory(c) Alcohol distillery(d) Plastic cup manufacturing factoryThe question was posed to me during an internship interview.My question is taken from Oxygen Transfer in Fermenters topic in division Mass Transfer of Bioprocess Engineering

What is the unit of diffusion flux “J” in the Fick’s law equation?(a) mol m^−2 s^−1(b) mol m^2 s^−1(c) mol m^2 s^1(d) mol m^−2 s^1This question was addressed to me in my homework.My doubt stems from Molecular Diffusion topic in chapter Mass Transfer of Bioprocess Engineering

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment