In order to check the CLR function of a counter ____________(a) Apply the active level to the CLR input and check all of the Q outputs to see if they are all in their reset state(b) Ground the CLR input and check to be sure that all of the Q outputs are LOW(c) Connect the CLR input to Vcc and check to see if all of the Q outputs are HIGH(d) Connect the CLR to its correct active level while clocking the counter; check to make sure that all of the Q outputs are togglingThe question was asked at a job interview.Query is from Asynchronous Down Counter topic in section Counters of Digital Circuits

In order to check the CLR function of a counter ____________(a) Apply

1.	In order to check the CLR function of a counter ____________(a) Apply the active level to the CLR input and check all of the Q outputs to see if they are all in their reset state(b) Ground the CLR input and check to be sure that all of the Q outputs are LOW(c) Connect the CLR input to Vcc and check to see if all of the Q outputs are HIGH(d) Connect the CLR to its correct active level while clocking the counter; check to make sure that all of the Q outputs are togglingThe question was asked at a job interview.Query is from Asynchronous Down Counter topic in section Counters of Digital Circuits
Answer» The correct choice is (a) Apply the active LEVEL to the CLR input and check all of the Q outputs to see if they are all in their reset STATE To explain: CLR stands for CLEARING or resetting all states of flip-flop. In order to check the CLR function of a counter, apply the active level to the CLR input and check all of the Q outputs to see if they are all in their reset state.

Discussion

No Comment Found

Related InterviewSolutions

What is the maximum delay that can occur if four flip-flops are connected as a ripple counter and each flip-flop has propagation delays of tPHL = 22 ns and tPLH = 15 ns?(a) 15 ns(b) 22 ns(c) 60 ns(d) 88 nsThe question was asked during an online interview.I want to ask this question from Counter Implementation and Applications topic in chapter Counters of Digital Circuits
A ripple counter’s speed is limited by the propagation delay of __________(a) Each flip-flop(b) All flip-flops and gates(c) The flip-flops only with gates(d) Only circuit gatesThis question was posed to me during an online interview.I need to ask this question from Counter Implementation and Applications topic in division Counters of Digital Circuits
Which one is a 4-bit binary ripple counter?(a) IC 7493(b) IC 7490(c) IC 7491(d) IC 7492I have been asked this question in homework.The origin of the question is Counter ICs topic in section Counters of Digital Circuits
A 12 MHz clock frequency is applied to a cascaded counter containing a modulus-5 counter, a modulus-8 counter, and a modulus-10 counter. The lowest output frequency possible is ________(a) 10 kHz(b) 20 kHz(c) 30 kHz(d) 60 kHzThe question was posed to me by my school principal while I was bunking the class.My doubt is from Counter ICs in section Counters of Digital Circuits
A decimal counter has ______ states.(a) 5(b) 10(c) 15(d) 20I had been asked this question during an online interview.I would like to ask this question from Counters in section Counters of Digital Circuits
How many types of the counter are there?(a) 2(b) 3(c) 4(d) 5The question was asked in semester exam.My doubt is from Counters topic in chapter Counters of Digital Circuits
A 4-bit binary up counter has an input clock frequency of 20 kHz. The frequency of the most significant bit is ________(a) 1.25 kHz(b) 2.50 kHz(c) 160 kHz(d) 320 kHzI had been asked this question during an internship interview.The origin of the question is Up Down Counter in division Counters of Digital Circuits
An asynchronous binary up counter, made from a series of leading edge-triggered flip-flops, can be changed to a down counter by ________(a) Taking the output on the other side of the flip-flops (instead of Q)(b) Clocking of each succeeding flip-flop from the other side (instead of Q)(c) Changing the flip-flops to trailing edge triggering(d) All of the MentionedThis question was posed to me in an interview for job.I'm obligated to ask this question of Up Down Counter topic in portion Counters of Digital Circuits
The designationmeans that the ________(a) Up count is active-HIGH, the down count is active-LOW(b) Up count is active-LOW, the down count is active-HIGH(c) Up and down counts are both active-LOW(d) Up and down counts are both active-HIGHThe question was asked in a national level competition.Origin of the question is Up Down Counter topic in section Counters of Digital Circuits
Which is not an example of a truncated modulus?(a) 8(b) 9(c) 11(d) 15The question was posed to me in class test.The doubt is from Up Down Counter topic in section Counters of Digital Circuits

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment