This time I'm the one asking for help. I used to large LCD displays when I am using my computer. The computer I'm on now is a single core AMD CPU with just under two gigs of memory. The dual display card is one of the older ATI cards they came out a few years ago. The card works fine, the problem is my VGA switch box.
Sometimes I need to use another computer for certain things. One computer might be doing a backup or an update or some other such thing, and so I'll use the second computer to get on the Internet and do some surfing while the other machine does its thing. So that's why I use a VGA switch on one of the monitors.
Actually, both monitors are running VGA. I don't happen to have a digital cable at hand. But I don't think that's the problem. Sometimes I forget to turn the VGA switch to the correct position before I turn on the main computer. So then Windows comes up and doesn't see the second monitor and proceeds to turn off the little box that says extend my desktop. Here's the image below.

---------------------------------------------------------
So I have to go and manually enter in the option BACK on. But I was wondering, is there someway to tell Windows XP to leave that feature on, even if the monitor is off-line? Or, could I make a small batch file that could turn that option on so as to reduce the number of keystrokes in an annoyance?
It's not really all that important, it's just an annoyance. But, I recalll, I didn't seem to have this problem when I was using the old-fashioned CRT monitors. At least I don't recall having that problem. Does the fact that I'm using LCD monitors have something to do with this? Or does it have something to do with the video card I'm now using? I did RECENTLY changed the video card I use when I changed the machine I use. I'm not using my old Intel motherboard anymore, I opted to use this AMD board because it's faster and I can get more memory into it.
So, is there an easy fix? How can I keep the extended desktop on even if the monitor is off-line?
The problem is because there is no monitor connected so your video card cannot acquire the DDC info for the monitor. Note that this would be an issue with nearly any monitor from about 1995 onwards.

Additionally, since you are using it for a dual display setup, Windows only sees a single monitor, and unchecks that option- just as you said.

I don't think you can force it on... just remember to plug the monitor in I used to run dual CRT's with dual video cards and that's exactly how it functions.  Nothing I KNOW that you can do about it.Thanks both of your. I was just hoping.
Now I will just have to remember to flick the switch before I boot up.I think a KVM switch would solve this problem. (most) KVM switches have an auto scan feature, that will scan every X amt of seconds and "activate" the keyboard, video, and mouse so that both systems can "see" them.

With that said, you wouldnt have to manually flip the switch on your VGA SPLITTER. Just hit the hotkey twice, and the auto scan will keep the connections active.

Usually the hotkey (depending on brand - most of my experience is with 2/4 port Linksys KVM switches) is EITHER CTRL+CTRL (left or right, depending on which PC is hooked up to which port), or Scroll Lock+Scroll Lock

Best of luck! Quote from: zero_defekz on April 30, 2010, 07:32:12 PM

I think a KVM switch would solve this problem. (most) KVM switches have an auto scan feature, that will scan every X amt of seconds and "activate" the keyboard, video, and mouse so that both systems can "see" them.

With that said, you wouldnt have to manually flip the switch on your VGA splitter. Just hit the hotkey twice, and the auto scan will keep the connections active.

Usually the hotkey (depending on brand - most of my experience is with 2/4 port Linksys KVM switches) is either CTRL+CTRL (left or right, depending on which PC is hooked up to which port), or Scroll Lock+Scroll Lock

Best of luck!