|
Answer» I am trying to get Upnp to set up Emules ports (TCP&UDP)But it always fails, even when no firewall is enabled.
I use Windows Vista's firewall, and went into it and GAVE EMULE 'exception' status. Then I added 2 exception ports (emul's udp and tcp ports.)
However i was only able to set the portnumber and protocol of those 2 ports, i did not see anything else like this guide shows http://www.emule-project.net/home/perl/hel...mp;topic_id=122 .
My router is a : Linksys wireless-G Broadband router (with 4 port switch) Model: WRT54G
Please help me! I dont know what to do.Do you need to set up ports?
If you are a dedicated user of the network, then, perhaps, but, you have to consider, the more ports you open, the more open your system is, and the more SUSCEPTIBLE to HACKING it becomes, especially if you dont keep the program OPENED.
If it works without the ports being forwarded, I would recommend leaving it alone.
Also, you need to forward the ports in your router if you want them to forward correctly on your computer.
|
