Saved Bookmarks
| 1. |
Solve : Low Format of Hard Drive? |
|
Answer» Hello - I forgot to mention that I had reformatted the drive 4-5 times using the Toshiba recovery disk, with the same problems recurring after the formats. That is probably why he recommended the low format. Sounds like he is thinking this might give some extended life to that HDD. Make sure to look into the cost of a replacement HDD for that laptop before you give up altogether. Even though you said you don't want to toss a bunch of money at it a reasonably priced new HDD would work fine if the machine is of use to you.Personal info is off of it - just wanted to get it going. If this doesn't work, then I am going to replace it. Thanks for all suggestions! Frieda And, if you replace the hard drive and you find that the computer has something else wrong with it and you end up getting another computer, you could get an external enclosure for that hard drive and then you'll have an external hard drive, a good thing to have for backup purposes.Thanks so much for your help and suggestions! Frieda You're more than Welcome. Stop by anytime... Quote Why do you want to format the laptop for? If you want remove your personal information from it, the formats should have removed that. If the laptop doesn't work now I doubt a low format would make any difference. This is somewhat true, however, a regular format does not necessarily remove all hard disk drive files, while a low-level format is more thorough. In either case, depending on who is doing it and how they are doing it...data recovery may still be possible...to an extent. Low-Level Formatting "Low-level formatting is the process of outlining the positions of the tracks and sectors on the hard disk, and writing the control structures that define where the tracks and sectors are. This is often called a "true" formatting operation, because it really creates the physical format that defines where the data is stored on the disk. The first time that a low-level format ("LLF") is performed on a hard disk, the disk's platters start out empty. That's the last time the platters will be empty for the life of the drive. [highlight]If an LLF is done on a disk with data on it already, the data is permanently erased (save heroic data recovery measures which are sometimes possible).[/highlight] If you've explored other areas of this material describing hard disks, you have learned that modern hard disks are much more precisely designed and built, and much more complicated than older disks. Older disks had the same number of sectors per track, and did not use dedicated controllers. It was necessary for the external controller to do the low-level format, and quite easy to describe the geometry of the drive to the controller so it could do the LLF. Newer disks use many complex internal structures, including zoned bit recording to put more sectors on the outer tracks than the inner ones, and embedded servo data to control the head actuator. They also transparently map out bad sectors. [highlight]Due to this complexity, all modern hard disks are low-level formatted at the factory for the life of the drive. There's no way for the PC to do an LLF on a modern IDE/ATA or SCSI hard disk, and there's no reason to try to do so.[/highlight] [highlight]Not strictly true, you CAN perform a Low Level Format, so long as you use the tools (software) designed specifically for your drive."[/highlight] High-Level Formatting (Regular) "After low-level formatting is complete, we have a disk with tracks and sectors--but nothing written on them. High-level formatting is the process of writing the file system structures on the disk that let the disk be used for storing programs and data. If you are using DOS, for example, the DOS FORMAT command performs this work, writing such structures as the master boot record and file allocation tables to the disk. High-level formatting is done after the hard disk has been PARTITIONED, even if only one partition is to be used. [highlight]The distinction between high-level formatting and low-level formatting is important. It is not necessary to low-level format a disk to erase it: a high-level format will suffice for most purposes; by wiping out the control structures and writing new ones, the old information is lost and the disk appears as new. (Much of the old data is still on the disk, but the access paths to it have been wiped out.) Under some circumstances a high-level format won't fix problems with the hard disk and a zero-fill utility may be necessary.[/highlight] Different operating systems use different high-level format programs, because they use different file systems. However, the low-level format, which is the real place where tracks and sectors are recorded, is the same." |
|