Saved Bookmarks
| 1. |
Solve : Winows 7 always hangs on install? |
|
Answer» Hello, this is my first post so here goes. I originally tried to install a new OEM 64 bit copy of Windows 7 Home Premium on this new computer and it would go along and load all the files and then hang on the installing updates. What exactly do you mean by "oem" ? You cannot use an INSTALLATION disk that came with a store-bought computer to install on a custom build. Thanks for the reply. OEM means Original Equipment Manufacturer and is used by system builders to load into new machines. I buy it because it's cheaper than the full VERSION. It works just the same but you do not get fancy packaging and little support. In addition I believe you cannot transfer an OEM copy to another machine. Sorry if I was not clear on my computer,it is a new computer that I am trying to install a new copy of windows 7 on. Some of the components are not brand new but the build is and the heart of it is being the CPU,motherboard and hard drive. I installed a copy of Vista Home Premium 64 bit just to see if it would work and it did but my goal is still to get Windows 7 Home Premium 64 bit on board. Possibly the 32 bit version would install just fine, I don't know. I must add that the copy of Vista that I installed on my new build is already being used on another computer that I have and so I have not connected with Microsoft for the latest updates because they would inform me that I am using a copy of Vista already registered to another computer. Thanks for asking ChrisI know what OEM is.. I was wondering what YOU meant by it. Where did you get the disk from?http://www.msi.com/uploads/test_report/TR10_1916.pdf It could be a memory compatibility issue. This is the supported memory list for the board.. Corsair is listed, but only in a 1 Gigabyte module Quote from: EEVIAC on April 01, 2010, 05:59:22 AM I know what OEM is.. I was wondering what YOU meant by it. Not relevant, as the ChrisG clarified what he meant by an OEM disc. They can be bought from local computer stores, Newegg, Micro Center, Fry's, etc. In any case, there could be a number of possibilities: 1) Bad disc. 2) Bad optical drive (unlikely, as other discs work, and genuine Vista and 7 discs are DVDs) 3) Bad SATA drivers (i.e.: if your motherboard's SATA mode is AHCI, and 7's drivers may be giving you grief--try loading the manufacturer's drivers from a thumb drive during install...or just switch SATA to legacy mode if you want to do that...) 4) As EEVIAC said, memory compatibility. You may want to flash the BIOS to address this one. 5) Bad RAM altogether. Download MEMTEST86+ (Google it), burn the ISO to a CD, and boot from the resulting CD. I'm with eeviac on this one... Quote from: killerb255 on April 01, 2010, 10:56:15 AM Not relevant Duh Thanks anyway, for setting me straight Quote from: patio on April 01, 2010, 11:46:26 AM I'm with eeviac on this one... As far as the RAM being the main suspect...i should have clarified that...You know, you guys are great, it's like having an encounter with the KRELL except I don't think I would live through the boost. I purchased the Windows 7 OEM disk at Newegg. I was considering going with 32bit as that may install without hardware hassles and I really don't need more than 6 gigs anyway. But that does not mean that I will ignore the memory issue. Should I just buy four 1gig sticks of DDR3? Some of the solutions are new to me but will enjoy trying this stuff out. Certainly getting deep into the bios will be SOMETHING new. Thanks -Killerb 255,Patio and EEVIAC for your help. I will keep you informed. Chris Since your board supports overclocking, go with DDR3 800 MHz. You can probably find some faster DDR3 memory that's not supported in the JEDEC standard, but it's up to you. Refer to the board manual for proper configuration of memory for dual channel setup. Generally that means you should buy modules of equal capacity, and install them into the correct "channels" on the board... I'm not necessarily encouraging you to overclock your system, but it's always good to leave some room.. I suppose a bios update could help with compatibility but don't get your hopes up. Your bios M-Flash utility will provide a virtually risk-free method of updating the bios. Incase the update fails the bios can be booted from a thumb drive.Just a reminder.. remember to refer to the qualified memory list when making your selection. I didn't emphasize that in my previous post..Just remembered i've seen this before with Viata and 7...try the install again with only 1 stick of RAM and add the other later.lol I think I remember what thread you're taking about.It was a 6 pager.... |
|