The parameters Y11, Y12, Y21, Y22 are called?(a) Open circuit impedance parameters(b) Short circuit admittance parameters(c) Inverse transmission parameters(d) Transmission parametersThis question was posed to me in a national level competition.This intriguing question originated from Short Circuit Admittance(Y) Parameters in portion Two-Port Networks of Network Theory

The parameters Y11, Y12, Y21, Y22 are called?(a) Open circuit impedanc

1.	The parameters Y11, Y12, Y21, Y22 are called?(a) Open circuit impedance parameters(b) Short circuit admittance parameters(c) Inverse transmission parameters(d) Transmission parametersThis question was posed to me in a national level competition.This intriguing question originated from Short Circuit Admittance(Y) Parameters in portion Two-Port Networks of Network Theory
Answer» Right ANSWER is (B) Short circuit admittance parameters To explain I would say: The parameters Y11, Y12, Y21, Y22 are called short circuit admittance parameters also called network functions as they are obtained by short circuiting PORT 1 or port 2.

Discussion

No Comment Found

Related InterviewSolutions

A voltmeter has a sensitivity of 1000 Ω/V reads 200 V on its 300 V scale. When connected across an unknown resistor in series with a millimeter, it reads 10 mA. The error due to the loading effect of the voltmeter is(a) 3.33%(b) 6.67%(c) 13.34%(d) 13.67%I got this question by my school teacher while I was bunking the class.My doubt stems from Advanced Problems on Two Port Network topic in portion Two-Port Networks of Network Theory
A 200 μA ammeter has an internal resistance of 200 Ω. The range is to be extended to 500μA. The shunt required is of resistance __________(a) 20.0 Ω(b) 22.22 Ω(c) 25.0 Ω(d) 50.0 ΩThis question was posed to me in class test.Enquiry is from Advanced Problems on Two Port Network topic in portion Two-Port Networks of Network Theory
A resistor of 10 kΩ with the tolerance of 5% is connected in series with 5 kΩ resistors of 10% tolerance. What is the tolerance limit for a series network?(a) 9%(b) 12.04%(c) 8.67%(d) 6.67%I have been asked this question during an online interview.I would like to ask this question from Advanced Problems on Two Port Network topic in division Two-Port Networks of Network Theory
For the circuit given below, the value of the Inverse hybrid parameter g11 is ___________(a) 0.133 Ω(b) 0.025 Ω(c) 0.3 Ω(d) 0.25 ΩThis question was posed to me in class test.The question is from Advanced Problems on Two Port Network in portion Two-Port Networks of Network Theory
For the circuit given below, the value of the hybrid parameter h21 is ___________(a) 0.6 Ω(b) 0.5 Ω(c) 0.3 Ω(d) 0.2 ΩI had been asked this question in an interview for job.This interesting question is from Advanced Problems on Two Port Network topic in division Two-Port Networks of Network Theory
For the circuit given below, the value of the hybrid parameter h11 is ___________(a) 75 Ω(b) 80 Ω(c) 90 Ω(d) 105 ΩThis question was addressed to me during an online exam.Question is taken from Advanced Problems on Two Port Network in section Two-Port Networks of Network Theory
Consider a circuit having a charge of 600 C, which is delivered to 100 V source in a 1 minute. The value of Voltage source V is ___________(a) 30 V(b) 60 V(c) 120 V(d) 240 VThis question was addressed to me in an interview for job.The query is from Advanced Problems on Two Port Network topic in division Two-Port Networks of Network Theory
The energy required to charge a 10 μF capacitor to 100 V is ____________(a) 0.01 J(b) 0.05 J(c) 5 X 10^-9 J(d) 10 X 10^-9 JI had been asked this question during an online interview.This is a very interesting question from Advanced Problems on Two Port Network topic in chapter Two-Port Networks of Network Theory
Given that, R1 = 36 Ω and R2 = 75 Ω, each having tolerance of ±5% are connected in series. The value of resultant resistance is ___________(a) 111 ± 0 Ω(b) 111 ± 2.77 Ω(c) 111 ± 5.55 Ω(d) 111 ± 7.23 ΩI got this question in exam.Question is taken from Advanced Problems on Two Port Network in portion Two-Port Networks of Network Theory
A particular electric current is made up of two components a 10 A, a sine wave of peak value 14.14 A. The average value of electric current is __________(a) 0(b) 24.14 A(c) 10 A(d) 14.14 AThe question was posed to me in quiz.Question is taken from Advanced Problems on Two Port Network topic in division Two-Port Networks of Network Theory

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment