A ____________ is a structural element in masonry construction that provides support at openings in the masonry. Alternate names are “flat arch” and “straight arch”.(a) round arch(b) equilateral arch(c) flamboyant arch(d) jack archI got this question in an online interview.Asked question is from Jack Arched and Flat Terraced Roof in division Different Type Roofs, R.C.C of Civil Engineering Drawing

A ____________ is a structural element in masonry construction that pr

1.	A ____________ is a structural element in masonry construction that provides support at openings in the masonry. Alternate names are “flat arch” and “straight arch”.(a) round arch(b) equilateral arch(c) flamboyant arch(d) jack archI got this question in an online interview.Asked question is from Jack Arched and Flat Terraced Roof in division Different Type Roofs, R.C.C of Civil Engineering Drawing
Answer» The CORRECT option is (d) jack arch Easiest explanation: Unlike REGULAR arches, jack arches are not semicircular in form. Instead, they are flat in profile and are used under the same circumstances as lintels. Unlike lintels, which are subject to bending stress, jack arches are composed of individual masonry elements CUT or formed into a wedge shape that efficiently uses the compressive STRENGTH of the masonry in the same MANNER as a regular arch.

Discussion

No Comment Found

Related InterviewSolutions

Concrete reinforced with fibers (which are usually steel, glass, or plastic fibers) is less expensive than hand-tied rebar, while still increasing the tensile strength many times.(a) True(b) FalseI had been asked this question in a job interview.My doubt stems from R.C.C. Work and Amount topic in portion Different Type Roofs, R.C.C of Civil Engineering Drawing
Thickened part of a flat slab over its supporting column, is technically known as _____________(a) drop panel(b) capital(c) column head(d) cannot be determinedI got this question during an interview.This intriguing question comes from Estimation in R.C.C. Structures in division Different Type Roofs, R.C.C of Civil Engineering Drawing
In R.C.C. work the end or side covers for steel bar may be taken as ____________(a) 4cm to 5cm(b) 7cm to 9cm(c) 6cm to 9cm(d) 3cm to 7cmThis question was addressed to me in a job interview.The doubt is from R.C.C. Work and Amount in portion Different Type Roofs, R.C.C of Civil Engineering Drawing
The four-sided slopes are not the characteristic feature of only Mansard roofs the _______________ also come with this feature.(a) mansard roof(b) gambrel Roof(c) salt Box Roof(d) pyramid roofThe question was posed to me at a job interview.Asked question is from Madras Terraced and Sloping Roof in division Different Type Roofs, R.C.C of Civil Engineering Drawing
A foundation rests on _____________(a) base of the foundation(b) subgrade(c) foundation soil(d) base of the foundation, subgrade and foundation soilI had been asked this question in an internship interview.The above asked question is from Estimation in R.C.C. Structures topic in division Different Type Roofs, R.C.C of Civil Engineering Drawing
Figure below is a section of a roof, identify the type _________(a) Salt Box roof(b) Hammerbeam roof(c) Mansard Roof(d) Pyramid roofThe question was asked in an interview for job.Question is taken from Wooden and Steel Roof Truss in chapter Different Type Roofs, R.C.C of Civil Engineering Drawing
The number of treads in a flight is equal to __________(a) risers in the flight(b) risers plus one(c) risers minus one(d) risers plus threeThis question was posed to me during an interview for a job.Question is taken from Estimation in R.C.C. Structures topic in division Different Type Roofs, R.C.C of Civil Engineering Drawing
Which is one of the most efficient types of timber roof trusses?(a) Raised Heel Roof Truss(b) Quadrangular Roof Trusses(c) Parallel Chord Roof Truss(d) Scissor Roof TrussI got this question in an interview for internship.My question is taken from Wooden and Steel Roof Truss in division Different Type Roofs, R.C.C of Civil Engineering Drawing
For initial estimate for a beam design, the width is assumed _____________(a) 1/15th of span(b) 1/10th of span(c) 1/20th of span(d) 1/30th of spanThis question was posed to me during an online exam.This interesting question is from Estimation in R.C.C. Structures in section Different Type Roofs, R.C.C of Civil Engineering Drawing
Simple gable roofs like those found on colonial or ranch homes are easy to calculate.(a) False(b) TrueThe question was asked in unit test.Question is taken from Madras Terraced and Sloping Roof in portion Different Type Roofs, R.C.C of Civil Engineering Drawing

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment