In general, all types of sections for isometric drawing may be applied to oblique drawing.(a) True(b) FalseI got this question in semester exam.This question is from Oblique Projection in portion Development of Surfaces, Isometric Projections, Perspective Projections & Transformation of Projections of Civil Engineering Drawing

In general, all types of sections for isometric drawing may be applied

1.	In general, all types of sections for isometric drawing may be applied to oblique drawing.(a) True(b) FalseI got this question in semester exam.This question is from Oblique Projection in portion Development of Surfaces, Isometric Projections, Perspective Projections & Transformation of Projections of Civil Engineering Drawing
Answer» Correct choice is (b) False To explain: An isometric projection is a technical way of representing an object in three dimensions and MAY include several oblique views of the object. It’s used extensively in engineering and manufacturing to provide an accurate and detailed view of how an object is designed or put together, WHEREAS an oblique view will always show the object as being PERFECTLY flat with RESPECT to the picture plane (I.e., that particular face of the object will have only two dimensions from the viewer’s point of view).

Discussion

No Comment Found

Related InterviewSolutions

These are points at which the edges of the object appear to be converging. This point is seen at eye level, ie. on HP are __________(a) Station point(b) Piercing point(c) Exit point(d) Vanishing pointI had been asked this question in an interview for job.My question comes from Perspective Projection in division Development of Surfaces, Isometric Projections, Perspective Projections & Transformation of Projections of Civil Engineering Drawing
The shape of isometric drawing will be ______________(a) a plus(b) a cuboid(c) a staircase(d) a triangular prismI had been asked this question in a national level competition.This interesting question is from Isometric Projection in section Development of Surfaces, Isometric Projections, Perspective Projections & Transformation of Projections of Civil Engineering Drawing
The isometric view of the figure will resemble what type of structure?(a) A chair(b) A staircase(c) A table(d) A columnThis question was posed to me in examination.My enquiry is from Isometric Projection in chapter Development of Surfaces, Isometric Projections, Perspective Projections & Transformation of Projections of Civil Engineering Drawing
The following figure shows the _________ view of an object.(a) oblique(b) isometric(c) orthographic(d) perspectiveThe question was asked at a job interview.The origin of the question is Isometric Projection in chapter Development of Surfaces, Isometric Projections, Perspective Projections & Transformation of Projections of Civil Engineering Drawing
The red, blue curve in the figure (shown below) represents __________(a) welding(b) joining(c) fitting(d) curve of intersectionI got this question by my school teacher while I was bunking the class.This intriguing question comes from Intersection of Surfaces in portion Development of Surfaces, Isometric Projections, Perspective Projections & Transformation of Projections of Civil Engineering Drawing
The figure below represents _____________ point perspective.(a) 2(b) 3(c) 4(d) 5I had been asked this question by my school teacher while I was bunking the class.The doubt is from Oblique Projection in portion Development of Surfaces, Isometric Projections, Perspective Projections & Transformation of Projections of Civil Engineering Drawing
Here which type of isometric drawing view does the figure represents?(a) 3-Dimensional(b) Top, Front and Side(c) Multi-view drawing(d) OrthographicThe question was posed to me by my school teacher while I was bunking the class.The question is from Isometric Projection in division Development of Surfaces, Isometric Projections, Perspective Projections & Transformation of Projections of Civil Engineering Drawing
In perspective projection, all lines of sight start at a ________ point.(a) double(b) triple(c) multiple(d) singleI had been asked this question during an online interview.My question comes from Perspective Projection topic in section Development of Surfaces, Isometric Projections, Perspective Projections & Transformation of Projections of Civil Engineering Drawing
When the receding lines are true length, and the projectors are at 45 degrees to the plane of projection, the oblique drawing is called ______________(a) oblique projection(b) isometric projection(c) axonometric projection(d) cavalier projectionI have been asked this question by my school principal while I was bunking the class.The question is from Oblique Projection topic in chapter Development of Surfaces, Isometric Projections, Perspective Projections & Transformation of Projections of Civil Engineering Drawing
Figure below shows isometric view of the object having____________(a) irregular curve(b) circular curve(c) inclined curve(d) isometric curveThis question was addressed to me in examination.This key question is from Isometric Projection in portion Development of Surfaces, Isometric Projections, Perspective Projections & Transformation of Projections of Civil Engineering Drawing

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment