In the following figure, Part 2 represents?(a) cut-out(b) generator(c) jet pump with pressure switch(d) power sourceThis question was addressed to me in an online interview.My query is from Wells topic in portion Irrigation Works, Culverts, Bridges and Wells of Civil Engineering Drawing

In the following figure, Part 2 represents?(a) cut-out(b) generator(c)

1.	In the following figure, Part 2 represents?(a) cut-out(b) generator(c) jet pump with pressure switch(d) power sourceThis question was addressed to me in an online interview.My query is from Wells topic in portion Irrigation Works, Culverts, Bridges and Wells of Civil Engineering Drawing
Answer» The correct choice is (c) jet PUMP with PRESSURE switch The EXPLANATION is: A pump-jet, hydrojet, or water jet is a marine system that creates a jet of water for propulsion. The mechanical arrangement may be a ducted propeller (AXIAL-flow pump), a centrifugal pump, or a mixed flow pump which is a combination of both centrifugal and axial DESIGNS. The design also incorporates an intake to provide water to the pump and a nozzle to direct the flow of water out of the pump.

Discussion

No Comment Found

Related InterviewSolutions

Water use efficiency in the field can be determined as follows:(a) = (Water Transpired by Crop x Water Applied to Field) % 100.(b) False(c) TrueI have been asked this question in a job interview.I'm obligated to ask this question of Earthwork and Estimation in section Irrigation Works, Culverts, Bridges and Wells of Civil Engineering Drawing
________________ is the amount provided in the estimate and bill of quantities for some specialised work to be done by a specialised firm; whose details are not known at the time of preparing estimate.(a) Prime cost(b) Provisional sum(c) Capital cost(d) Building cost indexI had been asked this question in exam.Asked question is from Different Types Of Estimates in portion Irrigation Works, Culverts, Bridges and Wells of Civil Engineering Drawing
__________ is prepared on the basis of plinth area of building, the rate being deducted from the cost of similar building having similar specification, heights and construction, in the locality.(a) Cube Rate Estimate(b) Supplementary Estimate(c) Maintenance Estimate(d) Plinth Area EstimateThe question was posed to me in final exam.I'd like to ask this question from Different Types Of Estimates in chapter Irrigation Works, Culverts, Bridges and Wells of Civil Engineering Drawing
Approximate cost of a hostel building for 100 students @Rs.10000/- per student works out as Rs. 10 lakhs.(a) True(b) FalseI had been asked this question in a national level competition.This question is from Different Types Of Estimates in portion Irrigation Works, Culverts, Bridges and Wells of Civil Engineering Drawing
In __________ irrigation, water is piped to one or more central locations within the field and distributed by overhead high-pressure sprinklers or guns.(a) sprinkler(b) drip(c) shallow(d) rotaryI got this question in unit test.I'd like to ask this question from Earthwork and Estimation topic in division Irrigation Works, Culverts, Bridges and Wells of Civil Engineering Drawing
Well development is the process of removing fine sediment and drilling fluid from the area immediately surrounding the perforations.(a) True(b) FalseThe question was asked during a job interview.This is a very interesting question from Wells topic in division Irrigation Works, Culverts, Bridges and Wells of Civil Engineering Drawing
A culvert can be used to span over a canyon, or depression, or even over a freeway or roadway.(a) True(b) FalseI have been asked this question by my college director while I was bunking the class.Asked question is from Culverts in division Irrigation Works, Culverts, Bridges and Wells of Civil Engineering Drawing
The approx. cost of 10 km length of irrigation channel of 3 cu m per sec. capacity @ Rs.70000/- per km works out as Rs.7 lakh.(a) True(b) FalseI got this question in exam.Origin of the question is Different Types Of Estimates in section Irrigation Works, Culverts, Bridges and Wells of Civil Engineering Drawing
Subsurface Textile Irrigation (SSTI) is a technology designed specifically for subirrigation in only desert sands and heavy clays.(a) True(b) FalseI have been asked this question in unit test.My query is from Earthwork and Estimation in section Irrigation Works, Culverts, Bridges and Wells of Civil Engineering Drawing
Subirrigation has been used for many years in field crops in areas with high water tables.(a) True(b) FalseI have been asked this question in a job interview.This interesting question is from Earthwork and Estimation topic in chapter Irrigation Works, Culverts, Bridges and Wells of Civil Engineering Drawing

In the following figure, Part 2 represents?(a) cut-out(b) generator(c) jet pump with pressure switch(d) power sourceThis question was addressed to me in an online interview.My query is from Wells topic in portion Irrigation Works, Culverts, Bridges and Wells of Civil Engineering Drawing

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment