Modern track typically uses _____________ with a profile of an asymmetrical rounded I-beam.(a) wooden(b) iron(c) hot-rolled steel(d) alloy of aluminiumThe question was posed to me in semester exam.My doubt is from Dealing with Railways in division P.W.D of Civil Engineering Drawing

Modern track typically uses _____________ with a profile of an asymmet

1.	Modern track typically uses _____________ with a profile of an asymmetrical rounded I-beam.(a) wooden(b) iron(c) hot-rolled steel(d) alloy of aluminiumThe question was posed to me in semester exam.My doubt is from Dealing with Railways in division P.W.D of Civil Engineering Drawing
Answer» Correct option is (c) hot-rolled STEEL To ELABORATE: Unlike some other uses of iron and steel, RAILWAY rails are SUBJECT to very high stresses and have to be made of very high-quality steel alloy. It took many decades to improve the quality of the materials, including the change from iron to steel. The stronger the rails and the rest of the trackwork, the heavier and faster the trains the track can CARRY.

Discussion

No Comment Found

Related InterviewSolutions

Which among these is not considered as classification of works according to their cost?(a) Major work(b) Minor work(c) Petty work(d) Grand workI got this question in examination.The question is from Works in chapter P.W.D of Civil Engineering Drawing
Mutual mistake occurs when both parties of a contract are mistaken as to the terms.(a) False(b) TrueI had been asked this question during an internship interview.Question is taken from Contract System topic in division P.W.D of Civil Engineering Drawing
Coal ash (or cinder) is used in initial stages of a new construction of railway for __________(a) wooden sleepers(b) steel sleepers(c) cast iron sleepers(d) iron sleepersI have been asked this question in an interview.The question is from Dealing with Railways in division P.W.D of Civil Engineering Drawing
In Schedule contract the contractor undertakes the execution or construction of specific work with all its contingencies, to complete it in all respect within a specified time for a fixed amount.(a) False(b) TrueThis question was posed to me in quiz.My query is from Contract System in portion P.W.D of Civil Engineering Drawing
In P.W.D, name the person who submits the budget.(a) Superintending Engineer(b) Executive Engineer(c) Secretary of P.W.D(d) Chief MinisterThe question was posed to me in an internship interview.This is a very interesting question from Works in portion P.W.D of Civil Engineering Drawing
At a rail joint, the ends of adjoining rails, are connected with a pair of fish plates and _______(a) 8 fish bolts(b) 4 fish bolts(c) 1 fish bolts(d) 2 fish boltsI had been asked this question during an internship interview.This key question is from Dealing with Railways topic in portion P.W.D of Civil Engineering Drawing
Minimum depth of ballast prescribed of B.G. trunk lines of Indian Railways is?(a) 15 cm(b) 10 cm(c) 50 cm(d) 25 cmThis question was addressed to me during an interview for a job.My question comes from Dealing with Railways topic in section P.W.D of Civil Engineering Drawing
What are the employees know as, who are employed directly on the work for the actual execution of a specific work?(a) Co-workers(b) Assistant(c) Work charged Establishment(d) Work in-chargeThe question was posed to me during an interview for a job.The above asked question is from Works in chapter P.W.D of Civil Engineering Drawing
Which tender allows anyone to submit a tender to supply the goods or services that are required?(a) Framework tendering(b) Selective tendering(c) Open tendering(d) Close tenderingI had been asked this question during an internship interview.The doubt is from Contract System topic in section P.W.D of Civil Engineering Drawing
These are less urgent repair work that can wait a short time up to 28 days are ____________(a) moderate repair work(b) less urgent repair work(c) routine repair work(d) urgent repair workThe question was asked during an interview for a job.My question is from Works topic in chapter P.W.D of Civil Engineering Drawing

Modern track typically uses _____________ with a profile of an asymmetrical rounded I-beam.(a) wooden(b) iron(c) hot-rolled steel(d) alloy of aluminiumThe question was posed to me in semester exam.My doubt is from Dealing with Railways in division P.W.D of Civil Engineering Drawing

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment