Subgrade shall be well consolidated and compacted each with a camber of 1 in 60.(a) True(b) FalseThis question was addressed to me in class test.Question is taken from General Specifications of Modern Road topic in division Specifications, Estimation of Quantities of Materials and Transport of Civil Engineering Drawing

Subgrade shall be well consolidated and compacted each with a camber o

1.	Subgrade shall be well consolidated and compacted each with a camber of 1 in 60.(a) True(b) FalseThis question was addressed to me in class test.Question is taken from General Specifications of Modern Road topic in division Specifications, Estimation of Quantities of Materials and Transport of Civil Engineering Drawing
Answer» Correct ANSWER is (a) True Easiest explanation: Subgrades are commonly compacted before the construction of a road, pavement or railway track, and are sometimes stabilized by the addition of asphalt, lime, portland cement or other modifiers. The subgrade is the foundation of the pavement structure, on which the subbase is laid. The load-bearing strength of subgrade is measured by California Bearing Ratio (CBR) test, falling weight deflectometer back calculations and other METHODS.

Discussion

No Comment Found

Related InterviewSolutions

The absolute minimum sight distance required for stopping a vehicle moving with a speed of 80 km ph, is ____________(a) 100 cm(b) 120 cm(c) 40 cm(d) 60 cmI have been asked this question in an interview for internship.This interesting question is from Detailed Specifications of Road Work topic in section Specifications, Estimation of Quantities of Materials and Transport of Civil Engineering Drawing
In ideal pavement is constructed with _________(a) bricks(b) hard soil(c) portland cement concrete(d) tarI have been asked this question in semester exam.Asked question is from Detailed Specifications of Road Work topic in chapter Specifications, Estimation of Quantities of Materials and Transport of Civil Engineering Drawing
What will be the ruling gradient in hills on “Other district roads”?(a) 1 in 20(b) 1 in 5(c) 1 in 10(d) 1 in 3The question was posed to me during an interview for a job.This intriguing question originated from General Specifications of Modern Road in section Specifications, Estimation of Quantities of Materials and Transport of Civil Engineering Drawing
For controlling the amount of water in cement regular moisture test should be carried out to maintain the required consistency.(a) True(b) FalseI got this question in an online quiz.I would like to ask this question from Detailed Specifications topic in chapter Specifications, Estimation of Quantities of Materials and Transport of Civil Engineering Drawing
For first class building roof shall be of R.C.C. slab.(a) True(b) FalseThis question was posed to me during a job interview.This intriguing question comes from General Specifications topic in chapter Specifications, Estimation of Quantities of Materials and Transport of Civil Engineering Drawing
Water, if any accumulates in the trench, should be bailed or pumped out without any extra payment.(a) True(b) FalseThis question was posed to me during an internship interview.My query is from Detailed Specifications in portion Specifications, Estimation of Quantities of Materials and Transport of Civil Engineering Drawing
For 2nd class building superstructure shall be of 1st class brickwork in lime mortar.(a) True(b) FalseThis question was posed to me in a national level competition.Question is from General Specifications in chapter Specifications, Estimation of Quantities of Materials and Transport of Civil Engineering Drawing
General specification gives the nature and the class of the work and the materials in general terms.(a) True(b) FalseI have been asked this question in examination.The doubt is from General Specifications topic in division Specifications, Estimation of Quantities of Materials and Transport of Civil Engineering Drawing
For fourth class building roofing shall be of __________ over bamboo and wooden supports.(a) Mud roof(b) Tile roof(c) Wooden roof(d) Bamboo roofThis question was posed to me during an interview.I need to ask this question from General Specifications in division Specifications, Estimation of Quantities of Materials and Transport of Civil Engineering Drawing
Which type of door does the figure show?(a) Hinged doors(b) Folding door(c) Rotating door(d) Automatic doorThis question was addressed to me in examination.I would like to ask this question from Estimate of Materials for Different House Parts topic in division Specifications, Estimation of Quantities of Materials and Transport of Civil Engineering Drawing

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment