The figure shown below represents which instrument?(a) Hammer base(b) Knife cutter(c) Hammer striker(d) AnvilThis question was posed to me in an interview for job.The question is from Steel and Iron Work in chapter Rules and Methods of Measurement of Civil Engineering Drawing

The figure shown below represents which instrument?(a) Hammer base(b)

1.	The figure shown below represents which instrument?(a) Hammer base(b) Knife cutter(c) Hammer striker(d) AnvilThis question was posed to me in an interview for job.The question is from Steel and Iron Work in chapter Rules and Methods of Measurement of Civil Engineering Drawing
Answer» The correct option is (d) Anvil The EXPLANATION is: The primary work surface of the anvil is KNOWN as the face. It is generally made of hardened steel and should be flat and smooth with rounded edges for most work. Any marks on the face will be transferred to the work. Also, sharp edges tend to cut into the metal being worked and may cause cracks to form in the workpiece. The face is hardened and tempered to resist the blows of the smith’s hammer, so the anvil face does not deform under repeated use. A hard anvil face also REDUCES the amount of force LOST in each hammer blow. Hammers, tools, and work pieces of hardened steel should never directly strike the anvil face with FULL force, as they may damage it; this can result in chipping or deforming of the anvil face.

Discussion

No Comment Found

Related InterviewSolutions

A wooden roof is a roofing system made from metal pieces or tiles characterized by its high resistance, impermeability and longevity.(a) True(b) FalseI got this question in an interview.Asked question is from Roof Covering, Sloping Roof & Flat Terraced Roof in portion Rules and Methods of Measurement of Civil Engineering Drawing
The seasoning of lumber is typically either kiln- or air-dried.(a) True(b) FalseThis question was addressed to me in an online interview.This interesting question is from Classification of Timber, Carpenter’s Work topic in section Rules and Methods of Measurement of Civil Engineering Drawing
The vertical timbers include _______ and wall studs.(a) logs(b) sheds(c) posts(d) plankThis question was addressed to me in my homework.The above asked question is from Classification of Timber, Carpenter’s Work topic in division Rules and Methods of Measurement of Civil Engineering Drawing
All bricks in this bond are headers, but for the lap-generating quoin three-quarter bat which offsets each successive course by half a header, this bond is called __________(a) Flemish stretcher bond(b) Stretcher, or running bond(c) Header bond(d) Raking stretcher bondThe question was posed to me in an online interview.My query is from Brickwork, Woodwork and Stone Masonry in chapter Rules and Methods of Measurement of Civil Engineering Drawing
English garden wall bond course of headers bond has three courses of stretchers between every course of stretcher.(a) True(b) FalseThe question was asked in an online quiz.This intriguing question comes from Brickwork, Woodwork and Stone Masonry topic in chapter Rules and Methods of Measurement of Civil Engineering Drawing
There are two main types of sedimentary stone used in masonry work, limestone and ______________(a) limestone(b) gravel(c) sandstones(d) marbleThis question was posed to me at a job interview.Query is from Brickwork, Woodwork and Stone Masonry topic in chapter Rules and Methods of Measurement of Civil Engineering Drawing
The craft of _______________ involves creating buildings, structures, and sculpture using stone from the earth.(a) brick masonry(b) cement masonry(c) sculpture masonry(d) stonemasonryThe question was posed to me in a national level competition.My query is from Brickwork, Woodwork and Stone Masonry topic in chapter Rules and Methods of Measurement of Civil Engineering Drawing
The coefficient of thermal expansion of concrete is very small to that of steel, eliminating large internal stresses due to differences in thermal expansion or contraction.(a) True(b) FalseI got this question in class test.My question comes from Earthwork, Concrete and R.C.C. work in portion Rules and Methods of Measurement of Civil Engineering Drawing
Prestressing concrete is a technique that decreases the load-bearing strength of concrete beams.(a) True(b) FalseThe question was posed to me in an online interview.I'm obligated to ask this question of Earthwork, Concrete and R.C.C. work topic in section Rules and Methods of Measurement of Civil Engineering Drawing
An ___________________ beam is one in which the tension capacity of the tensile reinforcement is smaller than the combined compression capacity of the concrete and the compression steel (under-reinforced at tensile face).(a) extra-reinforced(b) less-reinforced(c) under-reinforced(d) over-reinforcedI had been asked this question during an interview.The question is from Earthwork, Concrete and R.C.C. work in portion Rules and Methods of Measurement of Civil Engineering Drawing

The figure shown below represents which instrument?(a) Hammer base(b) Knife cutter(c) Hammer striker(d) AnvilThis question was posed to me in an interview for job.The question is from Steel and Iron Work in chapter Rules and Methods of Measurement of Civil Engineering Drawing

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment