The three lines meeting at a point and making an angle of 1200 with each other is called_________(a) isometric axes(b) axonometric(c) orthographic axes(d) oblique axesThis question was posed to me during an interview for a job.The question is from Isometric Projection in portion Development of Surfaces, Isometric Projections, Perspective Projections & Transformation of Projections of Civil Engineering Drawing

The three lines meeting at a point and making an angle of 1200 with ea

1.	The three lines meeting at a point and making an angle of 1200 with each other is called_________(a) isometric axes(b) axonometric(c) orthographic axes(d) oblique axesThis question was posed to me during an interview for a job.The question is from Isometric Projection in portion Development of Surfaces, Isometric Projections, Perspective Projections & Transformation of Projections of Civil Engineering Drawing
Answer» Right CHOICE is (a) isometric axes Explanation: Isometric axes can be positioned in a number of ways to create different VIEWS of the same object. Figure 6(a) is a regular isometric, in which the viewpoint is looking down on the top of the object. In a regular isometric, the axes at 30° to the horizontal are DRAWN upward from the horizontal. In the reversed axis isometric, as shown in figure 6(b), the viewpoint is looking up on the bottom of the object, and the 30° axes are drawn downward from the horizontal.Figure 6(c) & (d) SHOW the long axis isometric, where the viewpoint is looking from the right or from the left of the object, and one axis is drawn at 60 ° to the horizontal. While drawing the Isometric view, first the view point will have to be decided for OBTAINING the maximum technical information.

Discussion

No Comment Found

Related InterviewSolutions

These are points at which the edges of the object appear to be converging. This point is seen at eye level, ie. on HP are __________(a) Station point(b) Piercing point(c) Exit point(d) Vanishing pointI had been asked this question in an interview for job.My question comes from Perspective Projection in division Development of Surfaces, Isometric Projections, Perspective Projections & Transformation of Projections of Civil Engineering Drawing
The shape of isometric drawing will be ______________(a) a plus(b) a cuboid(c) a staircase(d) a triangular prismI had been asked this question in a national level competition.This interesting question is from Isometric Projection in section Development of Surfaces, Isometric Projections, Perspective Projections & Transformation of Projections of Civil Engineering Drawing
The isometric view of the figure will resemble what type of structure?(a) A chair(b) A staircase(c) A table(d) A columnThis question was posed to me in examination.My enquiry is from Isometric Projection in chapter Development of Surfaces, Isometric Projections, Perspective Projections & Transformation of Projections of Civil Engineering Drawing
The following figure shows the _________ view of an object.(a) oblique(b) isometric(c) orthographic(d) perspectiveThe question was asked at a job interview.The origin of the question is Isometric Projection in chapter Development of Surfaces, Isometric Projections, Perspective Projections & Transformation of Projections of Civil Engineering Drawing
The red, blue curve in the figure (shown below) represents __________(a) welding(b) joining(c) fitting(d) curve of intersectionI got this question by my school teacher while I was bunking the class.This intriguing question comes from Intersection of Surfaces in portion Development of Surfaces, Isometric Projections, Perspective Projections & Transformation of Projections of Civil Engineering Drawing
The figure below represents _____________ point perspective.(a) 2(b) 3(c) 4(d) 5I had been asked this question by my school teacher while I was bunking the class.The doubt is from Oblique Projection in portion Development of Surfaces, Isometric Projections, Perspective Projections & Transformation of Projections of Civil Engineering Drawing
Here which type of isometric drawing view does the figure represents?(a) 3-Dimensional(b) Top, Front and Side(c) Multi-view drawing(d) OrthographicThe question was posed to me by my school teacher while I was bunking the class.The question is from Isometric Projection in division Development of Surfaces, Isometric Projections, Perspective Projections & Transformation of Projections of Civil Engineering Drawing
In perspective projection, all lines of sight start at a ________ point.(a) double(b) triple(c) multiple(d) singleI had been asked this question during an online interview.My question comes from Perspective Projection topic in section Development of Surfaces, Isometric Projections, Perspective Projections & Transformation of Projections of Civil Engineering Drawing
When the receding lines are true length, and the projectors are at 45 degrees to the plane of projection, the oblique drawing is called ______________(a) oblique projection(b) isometric projection(c) axonometric projection(d) cavalier projectionI have been asked this question by my school principal while I was bunking the class.The question is from Oblique Projection topic in chapter Development of Surfaces, Isometric Projections, Perspective Projections & Transformation of Projections of Civil Engineering Drawing
Figure below shows isometric view of the object having____________(a) irregular curve(b) circular curve(c) inclined curve(d) isometric curveThis question was addressed to me in examination.This key question is from Isometric Projection in portion Development of Surfaces, Isometric Projections, Perspective Projections & Transformation of Projections of Civil Engineering Drawing

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment