These are open drains provided for conveying water from kitchens, bathroom and rain water to main sewers.(a) Drains(b) Sewers(c) Soak pit(d) Surface drainsThe question was posed to me in an interview.Origin of the question is Principle for the Preparation of Water Supply topic in portion Valuation, Reports Technical and Design Data of Civil Engineering Drawing

These are open drains provided for conveying water from kitchens, bath

1.	These are open drains provided for conveying water from kitchens, bathroom and rain water to main sewers.(a) Drains(b) Sewers(c) Soak pit(d) Surface drainsThe question was posed to me in an interview.Origin of the question is Principle for the Preparation of Water Supply topic in portion Valuation, Reports Technical and Design Data of Civil Engineering Drawing
Answer» Right option is (d) Surface drains The explanation is: These are usually provided at the side of the road and along the boundary line of the building. As far as possible drains should not be laid under the buildings. For EFFICIENT draining the surfacedrains should have certain qualities, such as should be laid in such a gradient to develop self -cleaning velocity, should have a reasonable FREE board at the top, joint should be SMOOTH finished, easy CURVES, INNER surface should be smooth, cheap in construction and maintenance.

Discussion

No Comment Found

Related InterviewSolutions

The most widely used expression for the growth rate of micro-organisms is given by Monod:(a) Total rate of microbial growth,(b) True(c) FalseI had been asked this question in class test.This key question is from Principle for the Preparation of Water Supply in portion Valuation, Reports Technical and Design Data of Civil Engineering Drawing
Cracking of the concrete section is nearly impossible to prevent.(a) True(b) FalseI have been asked this question at a job interview.I'd like to ask this question from Structural Designing and Thumb Rules topic in portion Valuation, Reports Technical and Design Data of Civil Engineering Drawing
For initial estimate for a beam design, the width is assumed?(a) 1/10th of span(b) 1/30th of span(c) 1/15th of span(d) 1/5th of spanI had been asked this question in final exam.My question is taken from Structural Designing and Thumb Rules in portion Valuation, Reports Technical and Design Data of Civil Engineering Drawing
A foundation rests on __________(a) base of the foundation(b) foundation soil(c) subgrade(d) foundation soil and subgradeThis question was addressed to me during an internship interview.My question is based upon Structural Designing and Thumb Rules in portion Valuation, Reports Technical and Design Data of Civil Engineering Drawing
_____________ is the technique of estimating or determining the fair price or value of a property such as a building, a factory, other engineering structures of various types.(a) depreciation(b) capital value(c) valuation(d) taxationThe question was asked in an international level competition.This is a very interesting question from Values, Tax, Funds & Rents etc topic in section Valuation, Reports Technical and Design Data of Civil Engineering Drawing
The maximum area of tension reinforcement in beams shall not exceed?(a) 1.5%(b) 4%(c) 7%(d) 0.5%I have been asked this question in an interview.I would like to ask this question from Structural Designing and Thumb Rules in section Valuation, Reports Technical and Design Data of Civil Engineering Drawing
A power canal refers to a canal used for hydraulic power generation, rather than for transport.(a) True(b) FalseI got this question during an internship interview.The question is from Reports on Estimate for the Construction of Road and Irrigation Channel in portion Valuation, Reports Technical and Design Data of Civil Engineering Drawing
The kind of canal section involved in irrigation work is __________(a) canal high in embankment in partly in excavation(b) canal partly in excavation and partly in embankment(c) canal less in embankment(d) canal half in excavationI got this question in my homework.Question is taken from Reports on Estimate for the Construction of Road and Irrigation Channel topic in portion Valuation, Reports Technical and Design Data of Civil Engineering Drawing
Construction is the process of constructing a building or infrastructure.(a) True(b) FalseThe question was posed to me in semester exam.This is a very interesting question from Reports on Estimate for the Construction of Building and Culvert topic in portion Valuation, Reports Technical and Design Data of Civil Engineering Drawing
What is the capitalized value of a property fetching a net annual rent of Rs.1000 and the highest rate of interest prevalent being 5%, rate of interest is 8%?(a) Rs.16500.00(b) Rs.18500.00(c) Rs.12900.00(d) Rs.12500.00I had been asked this question in an online quiz.My question is taken from Values, Tax, Funds & Rents etc in division Valuation, Reports Technical and Design Data of Civil Engineering Drawing

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment