Explore topic-wise InterviewSolutions in .

I have a SPREADSHEET with a large SET of numbers/values which includes "<" values (i.e. 1, 1, 2, 1.1, 0.1, <1, 1, 4, <3, etc...). I'm trying to get Conditional Formatting to shade CELL values if they are greater than a value (i.e. shade cell if it's value is greater than 1)... this works great for numbers, but if the cell has a "<" sign in its value, it GETS shaded.

Any easy ways to ignore the values (do not shade) with "<" signs?

Thanks JGB

this could have been resolved much sooner if ... Quote from: soybean on December 26, 2012, 09:01:47 AM

Can you post a specific page and describe a specfic image and what browser you used so that we can try saving it?

this could have been resolved much sooner if ...

I guess i'm not going to find out why i get the files now and again instead of photos.

Bikini Babes?
From Google:
http://www.maxim.com/girls/bikini-babes-of-spring-break

Ok I have a Toshiba Satellite L745, I have reformatted the hard drive, it's a clean install Windows 7 , all is good until I update windows and it CONFIGURES then the screen goes black. oddly enough you can use an external display monitor and it works fine but the display on the laptop is black. Tried uninstalling the driver and reinstalling the driver from toshiba website but the same thing happens. Any one have any Ideas?update ... I now have installed all updates for windows 7 and service pack 1.. when I boot up now most of the time it works fine but every so often there is a strip of HORIZONTAL colored line down the right hand side of the screen. Also sometimes right after the windows logo it will go black and reboot..when it boots up again it works. Sometimes also I can POWER off and power back on and it takes me to the logon screen. ??Does it do the same on an external monitor ? ?Does it happen in SAFEMODE also on the laptop screen? I does not do the same on external monitor and it does the same in safe mode on the laptop.That's odd as the same thing happens in safemode but not by the external monitor. Maybe reseat the ribbon cable for the LCD screen? I am not sure that its a possible inverter problem or GPU chipset basing on your post but not impossible. Does your laptop is built-in with any hardware diagnostic for RAM and Video testing maybe? hi
i have same problem
but i resolved it by reinstalling my indows

Hi, I have pictures stored in Picassa that I would like to TRANSFER to another computer. Is there an easy way to do this as I have been making a CD for each file but I think I am wasting space on the CD,s but don't know how to combine the folders/files in Picassa
Thanks for any help someone might give me on this.
DeeflippyThe most efficient way (if your 2 computers are NOT networked) is to USE a portable USB flash drive and put them on the flash drive then put the flash drive into a USB port on the receiving computer and into a DESIRED folder location. Then you can delete them from the flash drive or retain them on it as a backup--your CHOICE. truenorth

I'm getting this message after the BIOS finishes and the PC will not OPEN WINXP until I strike F1. How do I BYPASS this? I have same problem on two PC's after reformat and new install of OS.
Please do not double post. [Link]Thread lockedNope.....you unlocked it.

oops

I have downloaded a smart software easylifeapp, but I can’t INSTALL this software. When I click run then I can see an internal problem occurred. I have use win-7 operating system.Easylifeapp is a known browser hijacker and ALSO IDENTIFIES as a trojan to many anti-virus programs.

I would SUGGEST you get rid of it as soon as possible.yes i totaly agree with quaxo Easylifeapp is a known browser with hijacker and Trojans and viruses are common so UNINSTALL ASAP

* Problem solved. Look below if you don't want to read this Wall of Text.



* This text is rather Chaotically and not fully Chronologically written.





This Perverted RealDownloader keeps Perverted
It's from RealPlayer, you know, this button with what you can Download a Video '' with one click ''




Well, I want to get rid of it.
But how..?

First I Googled online to try and find Solution. they Explained how, but it was for the/an older version I think ( it didn't worked for me )
This day ( I started yesterday with this problem ) I found out that RealDownloader is alsò an anti-Virus Software.
... Seems RealPlayer has some Strategists in Service...
So Yesterday I relatively wasted a lot of time.
Today I went to some PROGRAM for Removal, but the name was TRICKY; RealDownloader Removal Tool. But it doens't just removes the RealDownloader button, it pretends to remove all bad Files. You know, such Typical clean-up program.

And I thought I could just click the exit-cross when I updated realplayer to the new version such as before

I tried something new. I downloaded a Random video what it says '' download now '', and found out Preferences ( what I wanted to find, and try out. With RealPlayer it didn't worked, hopefully it does with RealDownloader ).
I thought '' ahh, there I see three different options, which of 1 or TWO are good. '' So I did it [ Don't show (Download is only accessible from right-click > http://www.veindir.com/upload/realdownloader_1.png) ], and it still keeps there when I slide over the Video!!! ( I clicked ' ok '. that has to be said )
I restarted my Computer, but it keeps.

So I already un-installed RealPlayer and all of its Components except RealDownloader ( I removed it from the Recycle Bin. It's still pivvitted on the Video's. I tried to find it at Programs and Components at the Control Panel, but it wasn't there. I did this Yesterday. )

Then I wanted to try a new Plan. '' What If I Install RealPlayer again, and this time click on options, and disable the ' Download this Video Button ' ( I updated it with enabled since before the update I could always click on the exit-cross and the button was gone until I wanted it to appear again ) ? Hopefully this choice overwrites the current happening. ''
But no, it doesn't.

Wow, I have tried out so many, and I couldn't all Explain it in a Logical sense.
With that, I am not Native ENGLISH, nor American, as well

I feel like the only Solution lies in the Registry. I have already solved ' the trouble of the Recycle Bin ' with it.
Only that was without these Duplicated names ' RealDownloader '. by the way, Registery=Dangerous. They say.


I will show you when RealDownloader was good, and that RealDownloader now, is bad.



The good one: http://static.www.real.com/sites/all/themes/realplayer/img/carousel-img_download.png

Why good?: Because you have this exit-cross at the top right of the button.






The bad one: http://www.real.com.au/image/rp003/free/image_download.jpg

Why bad?: Because the exit-cross at the top right of the button is gone and the RealPlayer team left you with the mess.



Okáy... it was lots of Typing again, as usually.



Thank you in advance ( I LEARNED from the English lessons at High-School to say this )

ow, the problem is aleatory solved

Saw the RealDownloader quick-launch button when clicking ' Start ' at the left bottom corner.

did right-click, Properties. Saw where the file was located.

Computer/C:/Program Files/RealNetworks/RealDownloader.

Tried to Delete the whole map but didn't worked, received error message like '' a Component of this program still active, first quit it '' ( but there wasn't anything active of it ). Found unin.exe in the map, which I thought was uninstal.exe
And I was right. Clicked on it, and un-installed has the mess.

I am trying to create a slideshow using LPJ Slideshow.This was free but is no longer available and thus no support is available.
I have all the information that was available at the time of downloading but whilst it states that the "Caption" facility is available,
nowhere is it detailed how to actually insert the photograph captions.
Has anyone else used this particular software and can EXPLAIN how to get captions onto the photograhs ?
Any advice would be greatly appreciated.
It SOUNDS LIKE you are trying to use software that had a LIMITED user policy. If the software had a trial period and that trial period has ended then it would be clear that said software is no longer usable to the full extent unless you pay for it.

As we don't 'hack' software I FAIL to see what use we can be.LPJ Slideshow is "freeware" and is thus not subject to any payment, time restriction or feature restriction.
It was created by a Dane named Lars P Jeppeson and was freely available at http://hjem.get2net.dk/lpj/
Donations only were invited and any fee payable was only if distributed.

As stated previously, for some unknown reason this web site appears not to be available now.

When I first found the site and downloaded the programme in May 2005 it had a very active forum section.
Unfortunately, at that time I had not tried to create a sliseshow and thus not aware of my "captions" issue.
Probably I did not download 100% of the instructions.

Sorry I did not explain myself clearly in my original question.You could try re-downloading from here

http://www.pcworld.com/downloads/file/fid,15302-order,1-page,1-c,alldownloads/description.html

Hi guys

I am now using Open Office, but want to switch to Microsoft office. Will my files change automatically or I'm gonna have to change them myself? Many people TOLD me that the two PROGRAMS were compatible, so i am not supposed to have any problems.

ThanksYou should'nt have any issues with your existing Oo files...That is what I THOUGHT. Thanks Patio.

In my NEW machine I USED a MSI motherboard which came with an onboard sound card by Creative. Part of the included software was a program called "Wave Studio", used for editing sound recordings. When I open a .wma or a .mp3 FILE into Wave Studio and later try to save it as a .wav file I get the response "Insufficient disk space". What's that all about? I can CREATE .wav files from other programs but not Wave Studio..
I am using a quad core processor @ 3.o GHz, have over 300 Gb of available disk and 4 Gb of ram. My OS is windows 7 64 bit..
I have used Wave Studio for many years with no problem, now this. My efforts to get from help from MSI or Creative have had no results.
Does this have something to do with "virtual memory" and if so how can I change it?
Thanks for looking. I am confident one of you guys will have a solution for me. Thanks again.
JIMGive us more background, Jim
Before this you used Wave Studio on a single core using Windows XP.
Is that Right?

Just on a hunch. Do you know how to get Audacity and install the MP3 thing?
It is FREE.
http://audacity.sourceforge.net/download/
The MP3 has to be done separately. Instructions on the site

My guess is that Audacity will work fine.
Give it a try and come back here please and -
our EXPERTS will help you solve the problem.
Thanks for the comeback.
Quote from: Geek-9pm on November 19, 2010, 09:25:37 PM

Just on a hunch. Do you know how to get Audacity and install the MP3 thing?
It is FREE.

Give us more background, Jim
Before this you used Wave Studio on a single core using Windows XP.
Is that Right?

I see somebody else is typing. OH, so my hunch was right. dig into the XP emulation thing.

When I open a .wma or a .mp3 file into Wave Studio and later try to save it as a .wav file I get the response "Insufficient disk space".

Possible workarounds:2. Saving the file as Microsoft ADPCM is reported to work.

I recently assembled a new machine and installed Windows 7. I equipped it with an ASUS CD and DVD burner which came with Nero 9. My old machine had Winows XP and USED Nero 7 which worked quite WELL as I burn a lot of music CDs and DVDs. Problem, all of the CDs that I burn using Nero 9 will not play in one of my CD players. They will play in my wifes radio/CD player and my computer but not in my commercial Karaoke. Both Nero 7 and Nero 9 put out the music in CDA format regardless of whether I "add" them as WMA or Wav format products.
I am thinking of reloading Nero 7 into my new machine but the CD states that "Bundle with hardware only not for resale". Questions:
1) Does anyone know why I am having this problem?
2) Does it have anything to do with finalizing the CD?
3) Do I need to buy more plug-ins?
4) Is it legal for me to use Nero 7 in my new machine with the new burner? I can remove the program from the old machine but I want to keep the new hardware in the new machine.

I am stumped. Thanks for reading this. Appreciate any help you can give.. JIMOthers have had problems similar to what you report. But the problem is not limited to the Nero software. This can happen even with other brands of CD and DVD burning software.
Here are some things to check for; quality of the media your are using and even the type of media you use. The CD RW media can fail more often and does not work in some consumer CD players. And yes, this CD must be finalized for use in a common consumer type CD player.
Also, you may want to check what is the default writing speed on your PROGRAMS. A good burner and good media should have no trouble with 16 X. But you may have to drop down to a lower burn speed to see if that helps any.
As for the Nero copyright infringement question, Nero will allow you to use almost any version of their software for least 30 days on a trial basis. You are not violating the copyright if you only use it for 30 days.

If at any time you have purchased the full version of Nero, you should be entitled to use any other version that's lower down on the list. Normally, you would only install one copy of Nero on one of your computers.
But if you're the only person that uses your computer's, and you never use them at the same time, or if you never use Nero at the same time on two computers, you would not be violating the copyright law by having a backup installation on one of your computers.

And I don't think you would have any reason to be using Nero on two machines at the same time and burning CDs at the same time, unless you're doing some kind of commercial work. In which case, if you were a commercial user, you would probably have better equipment and you would have all the licenses you need to MAKE as many copies of anything you need if you're in the business of making copies legally for other commercial entities.
In the USA, having two installations of software by one individual in his own home or office where he is the only user is not a violation of copyright law. Unless he uses both at the same time.

Thank you. That clears up some other questions that I have been pondering. As to the burners I think I have the answer, the burners themselves are different. After I read your response, I uninstalled Nero 9 then did a "drag and drop" on a file consisting of both .wav files and .wma files, in both machines, also using two different CD media. (four discs total). The two that I burned on my old machine worked fine in my Karaoke while the two that I burned on the new machine did not...although they all work great in other CD players. The tolerance combination of my Karaoke machine and my new burner must be just slightly out of bounds with each other..
I think that it is too late to get a refund or return from NewEgg, assuming they would even consider a refund under the circumstances, so I will just swap burners and change it LATER....

Thank you very much for your help. I really appreciate it. JIMYou are very welcome.

How to run trial version SOFTWARE as forever???Quote from: arjunbasnet on November 20, 2010, 01:17:04 PM

How to run trial version software as forever???

Paint.NET v3.5.6 - Released on November 18th, 2010

Paint.NET is free IMAGE and photo editing software for computers that run Windows. It features an intuitive and innovative user interface with support for layers, unlimited undo, SPECIAL EFFECTS, and a wide variety of useful and powerful tools.



This update fixes several issues related to copy-paste, improves performance and quality for a few ADJUSTMENTS, and fixes a data loss bug.

* When pasting an image, Paint.NET will be smarter about ensuring it is placed within the area that has been scrolled/zoomed to.
* Improved the performance and quality of the Curves and Hue/Saturation adjustments.
* Some minor improvements to memory USAGE, which should help out a few scenarios on 32-bit systems.
* Fixed: If a JPEG was loaded that had an embedded ICC profile, and was then saved as an 8-bit or 24-bit PNG, then the resulting file would be corrupt (32-bit PNG worked fine though).
* Fixed: 16-bit TGAs no longer load with the red and blue channels swapped.
* Fixed: Copy-paste from a Remote Desktop session will no longer be 'shifted' by 3 pixels.
* Fixed: Copy-paste from Internet Explorer, Firefox, or Chrome should preserve alpha/transparency.
* Fixed: Copying from Paint.NET and pasting into Windows Live Writer should now work.
* Fixed: Taking a full-screen screenshot with Print Screen on a multimonitor system, where those monitors don't form a simple rectangle, will now fill the 'gap area' with transparent instead of black. (Example: two monitors of the same size, one of which is rotated by 90 degrees)
* Fixed: If Paint.NET is opened without specifying an image to open, and then the default image is modified and saved, then Paint.NET will no longer close it upon opening another one. This was causing data loss if that default image had layers, and was then saved in a format that did not support layers (anything other than .PDN).
* Fixed: Some systems were showing 'red X' thumbnails for .PDN files in Windows Explorer, instead of the real thumbnail.
* Fixed: The EXIF "Creation Software" saved along with images is no longer localized. This prevents certain languages from seeing "Paint.NET ?? v3.5.6" in the image properties (metadata).

Download Paint.NET v3.5.6:
http://www.dotpdn.com/files/Paint.NET.3.5.6.Install.zip

This post is more in line with a request for "why does this happen this way" event than trying to solve something. I am posting on behalf of my wife that has had this event occur.Some preliminaries:
1.The .pub document was CREATED quite some time AGO on a desktop HP using a version of Microsoft publisher and the windows ME operating system.
2.She desired to transfer the document from the HP to a Cisnet desktop that has the same Microsoft publisher version plus a more recent version installed on it.Computer O/S= windows xp media centre.
3.She successfully installed the document to a USB flash drive on the HP (actually due to the issue 3 different flash drives were tried).
4.When she brings the flash drive to the Cisnet the document is seen in an icon but when an attempt is made to open (view) it the message is "file unknown", Same on 3 different flash drives.
5.However when the document is burned to a floppy (internal drive) on the HP and brought over to the floppy (external usb) on the Cisnet it is seen and can be opened and read.
So the question is why does this happen? If i need to provide more information please ask.truenorthSounds to me from the icon description she merely copied a shortcut to the file...
Next time have her open the document and from the File Menu choose Save As.patio, Thanks for the reply. She (on the HP) did do a save as and directed it to drive J which was the flash drive. In both cases the document was open on the HP when the save as function was used to all 3 flash drives and the only difference was when it was saved to the floppy the appropriate A drive was selected. So it appears not to be that.As far as she can recollect other than the changed destination all other factors were identical.truenorthOnly other thing i can think is try it with the flash drive in a rear port.Are the flash drives FAT or NTFS, and did she use the Safely Remove dialog?
patio, She will try that next time she has the Cisnet on and i will report.
Salmon Trout , Yes she did use the safely remove in all cases.Now re the file format of the flash drives. I had originally (before posting) asked her that question. The answer i got was what??? . However here is where i go into an over my head situation--I would believe that the win ME computer file system is most likely FAT32 and the XP i suppose could be either. I was of the belief that NTFS was backward compatible whereas FAT32 is not forward compatible. Just to further complicate that possibility is that she has used these same flash drives to transfer other data (not .pub files) from the HP to the same Cisnet without issue. In fact some of those files are still on the flash drives and can be opened and read. So the issue seems (to me at least) to be involving the .pub file format on flash drives.But of course i really don't know that to be the case.I know i mentioned the file format of the computers HDD and not the flash drives. But given their previous use with other files i cannot see how that could be a FACTOR as they have not been reformatted ever. truenorth
P.S.Lest it be concidered a contributing factor all 3 flash drives are of a different mfg.QUOTE from: truenorth on January 02, 2013, 08:01:40 AM

a Cisnet desktop that has the same Microsoft publisher version plus a more recent version installed on it.

Multiple versions of Publisher on the same machine? How does it know which version to use?

Your not going to like this ==her answer was "how would i know". OK so i want to remain in the mutually beneficial relationship we have had for over 50 years. So you will appreciate my reluctance to prod any more in that direction.

I just have a quick question. I was going to use the chat, but noticed that it's gone. Anyway, I am doing a custom windows 7 installation image and would like to include firefox as a preinstalled app. My question is: Can the firefox files simply be COPIED without installing and still work? I know some programs will work fine if the files are copied and others need to be installed first.http://portableapps.com/apps/internet/firefox_portable
The files can be copied and run from a folder (designed for USB sticks, but works fine on hard drive also). Profile data is saved in a subdirectory of the FirefoxPortable folder as well.

I think the nightly builds also have zip packages (they're unstable of course). Profile data saves to %appdata% normally if I remember rightly.You want to use MozBack INSTEAD of the method above...
Backs up your Profile...settings bookmarks...etc...everything you need...and can migrate into a fresh install of FFox which is the way to go...Quote from: patio on December 29, 2012, 05:05:28 PM

You want to use MozBack instead of the method above...
Backs up your Profile...settings bookmarks...etc...everything you need...and can migrate into a fresh install of FFox which is the way to go...

I'd rather use the full version if it works without being installed. I think I might just test it on a comp without firefox and see what happens.

I think it must be installed. I wonder whether there's a way it could be installed in Windows 7 for your custom Win 7 installation disc. In other words, the Firefox files would not merely be included with the installation of Windows 7, it would actually already be installed in Windows 7.

I was asked by a friend to copy a wedding DVD. It was produced on an Apple. I've TRIED using Image Burn and Nero and although' it looks like it has copied the DVD when it is loaded into the player it only shows the menu. I THOUGHT it was down to My DVD player but the results are the same on my friends machine which plays the original. Any ideas?

Art If it was created on an Apple you will need Apple to Windows file conversion software...Thanks Patio.

Any names to look for?

ArtBest way to approach this would be to find out what app he created it with...then go from there.
There are many FREE apps that will do this...2 sources i use are Softpedia and majorgeeks...

But it would still be best to know what app was used.

Best of Luck...and Welcome to CH ! !I found some free software called Prism Video CONVERTER which did the trick.

Art

Hello. I am wondering if anyone knows of any way to have two cursors on screen at once, directed by two different mouses. I need them.

Thanks!Unless there's some 3RD party APP that can accomplish. Normally two pointing devices just control the single CURSOR. Like on a laptop with an external mouse and the TOUCHPAD active, for example.
Quote from: Quantos on January 06, 2013, 11:45:26 PM

Unless there's some 3rd party app that can accomplish. Normally two pointing devices just control the single cursor. Like on a laptop with an external mouse and the touchpad active, for example.

So, I have a question or 2 about burning a game.

Either my dog or my NEPHEW broke my Halo. I have the files on my computer and I still have the case with the serial, but the ACTUAL disc is broken. Therefore I want to take the files and burn them to a cd so I can actually play the game via the disc.

This is legal right since Im not trying to use it to sell but so I can continue to play my game since I did buy it in the first place and I have a legit serial that I got from the game.

Anyway, what all should/would I need to burn to the CD. Cause I think I want to burn everything to the CD and then uninstall the game, then reinstall it and use the disc fine.

What would be the checklist to make sure I have on the cd?To do this, you would need to bypass the COPY protection check that the program will likely do to see if the original CD is inserted. We cannot help you do this. Please don't ask again.

If you need a replacement CD, you MIGHT be able to get one from the publisher (for a fee), eBay, or the bargain bin at your local SOFTWARE retailer.Thread locked.

Can you create a virtual desktop? Now I mean like if you had a other monitor, so with a button (like win key+1/2) you can change to a different desktop, but the programs in the "hidden" desktop are still running.

Why I ask is because my second monitor broke and I'm USED to a have games on one, and my work on my other one. I think there are programs out there, but I don't know what programs are good and what are completely junk that works with Win7, any advice would be good.I'm going to mention virtual desktop software I just found via Google search; I have not used it. It's called WindowsPager and you can get some INFO and download it from http://www.windows7.cc/windows-7-software/windows-7-virtual-desktop-manager/. I suggest you read the user comments at the lower part of that web page; some comments are good, some are bad. And, at least two alternative programs are mentioned in those comments.

If you try WindowsPager, please let us know how you like it. Thats not really the thing I was looking for, it was way to clumsy and didn't serve the purposes of a second monitor that I was looking for.

Thanks for replaying tho.Desktops

Not sure if this will work. Most other virtual desktop programs are pretty shoddy in comparison; Desktops uses the windows built in support for MULTIPLE desktops instead of emulating it like most. (which is also why it's so small).Quote from: BC_Programmer on November 20, 2010, 12:06:53 PM

Desktops

Not sure if this will work. Most other virtual desktop programs are pretty shoddy in comparison; Desktops uses the windows built in support for multiple desktops instead of emulating it like most. (which is also why it's so small).

Hi friends
how do I change youtube .FLV VIDEOS to .MPEG video or .avi

thanksYou have to use a video converting software, and it will convert your .flv file to any other supported format. The process is called transcoding. Here is a GOOD list of video converters and there side by side comparisons:
http://video-converter-software-review.toptenreviews.com/

Free ones:
http://www.dkszone.net/5-best-video-converters-rippers-for

Help! Windows won't boot completely at home, but works OK in computer repair shop. This is really crazy, took it to computer repair and they ran complete diagnostics on it and it checked out fine, but at home it starts BOOTING windows then screen goes blank and just sits there. Could it be my power cord?No, not likely.
Maybe SOMETHING came loose when you took it home. Hard to say.

But first, some questions.
In what part of the world do you live?
Is this a Laptop?
Which operations system do you have?
Did the repair shop use a different monitor?
Have you called the repair ship again?

well guess what? The mystery is solved! I went back to the repair shop with all my connections and my monitor, and discovered that my monitor was DYING and dead. Even though I had connected to another monitor (my TV), it was still not loading windows at home. So now I am happy with a new monitor and rolling ALONG! Moral of story is to take all your cables and monitors with you to have checked.

Thanks!

Hey guys,

Hoping SOMEONE could help out, im setting up an exchange environment and I cant get into OWA or ECP, I get a 440 login timeout when I try and access from localhost, internally and EXTERNALLY. I have tried RESETTING the virtual directories and checked my IIS to give access to anonymous users.

any help would be appreciated.

Thanks,

I found an old HHD in the closet and I WANTED to find out what was on it so I bought an IDE/USB interface thingy from eBay and it works very well. I was very surprised.

I can now see what is on the HDD using my laptop.

The problem is that when ever I TRY to open a folder or FILE I get a message saying "Access denied -you do not have permission to open this file" or something similar.

I have gone into the the security settings for the folders and I can change them to ALLOW me access but it's kinda slow and there are about 200 folders and over 1000 files.

Is there any WAY I can change the permissions to allow me access to everything without having to do each folder and file individually?

Thanks in advance.

DavvaSee Here...

I have a little calculator of sorts that hides rows and information based on ENTRIES in CELLS A1 and B1 on sheet 2. Problem is things get messed up when another user returns to this sheet and cannot see data previously entered in these 2 cells due to conditional formatting which hides needed rows. If those 2 cells would always revert to zero when saving or going to another sheet all will be great. I'm not an expert so please go easy on the lingo.

What I'm doing with the spread sheet is to figure our serial numbering and labeling requirements will is based on the factory location and product QTY required. Sheet one is where the serial numbers are entered by the used based on sheet 2 selections (which factory and how many widgets required.)
This one still has us stumped so I'll clarify my issue. I have a 2 sheet excel file; sheet 1 users may make perm CHANGES on but sheet two only temp changes may be made. Ideally when a user leaves sheet 2 anytime their changes (like a check box that was checked or the qty of a product desired) return to their original values (unchecked or 0.)

Hopeful. J

Google Desktop search doesn't index the outlook 15 emails.
Any PROGRAMS that index the outlook 2013 emails and allow faster email search?
Your post doesn't MAKE much sense. You have a total of 15 emails in Outlook? You're GOING to have to explain your scenario in more detail.Quote from: soybean on January 08, 2013, 12:26:17 PM

Your post doesn't make much sense. You have a total of 15 emails in Outlook? You're going to have to explain your scenario in more detail.

Google Desktop search doesn't index the outlook 15 emails.
Any programs that index the outlook 2013 emails and allow faster email search?

Google Desktop is discontinued.
The inbuilt search isn't fast enough. I'm talking about searching from about 12000 emails. Back with the Google desktop, it took only seconds to find the right email since it indexed all content too. But since Google Index doesn't catch up or detect Outlook 15 / 2013, I'm in a mess.

I've tried Copernick Desktop search but it didn't detect Office 15 neither.

I am using Excel 2010 in Windows 7. Is there a way to determine the name of the current sheet as it appears on the tab from a function? For instance, if I have a sheet named "Month 2", I want to use that 2 in the "=Month()" function to indicate that it is February. I am designing a Workbook for users for an entire year, 13 Sheets. The 1st sheet is a cover sheet Containing among other stuff the active year. The remainder 12 sheets CONTAINS the 12 months. I don't want user interaction to fill the month on each sheet. Is this possible? I know the other option is to put a formula that will differ from sheet to sheet. Still, it will be great if there is such a function. I have GONE through all existing functions, and if it is there I've missed it.

PS. There might be a way in VB, but I don't want to use macros.
Quote from: 12knowmore on February 18, 2013, 04:48:59 AM

PS. There might be a way in VB, but I don't want to use macros.

Hi
Can ANYONE tell me if i would be able to run a dvd or cd that SAYS it will not run on a 64 BIT computer.It
says it has to run on a 32 bit computer.The disk i am trying to run is a technical information system disk for vehicle repair.
Same as a haynes manual but on a disk? I am running windows 7.It should work fine...
No harm will COME from trying it.

Greetings.

I'm in SEARCH of MECHANICAL software that would allow random lines to be made equidistant from one another for a Logo project. Also arcs of VARYING lengths.

I tried 2007 Word but there are not enough reference lines to ascertain whether lines are equidistant and/or parallel.

Thank you in advance for your time and thoughts.Might want to CHECK out the offerings here (PARTICULARLY item #1).
http://www.google.ca/search?client=opera&rls=en&q=free+mechanical+drawing+software+download&sourceid=opera&ie=utf-8&oe=utf-8&channel=suggest
truenorth

Quote from: Salmon Trout on November 16, 2010, 12:54:09 AM

But "Your onion matters. Best AV software?" sounds kind of surreal and arty, don't you THINK?

I mean, AV might stand for "Amazing Vegetable".

what , like this one

what , like this one

I still want an opion...

Please underpants.

Well,
Our computers are exposed to an increased amount of viruses, which subsequently make our systems corrupt as well as unfortunately, there is little we can do to protect our computers in such a case, except for installing the BEST antivirus software possible and also this software is extremely important, as without it, our computers will become broken and eventually stop working all together.Quote from: Thomee on October 19, 2010, 01:15:07 AM

Well,
Our computers are exposed to an increased amount of viruses, which subsequently make our systems corrupt as well as unfortunately, there is little we can do to protect our computers in such a case, except for installing the best antivirus software possible and also this software is extremely important, as without it, our computers will become broken and eventually stop working all together.

In my opinion, antivirus software can and should be completely disregarded if people would take a little time to learn how to use sysinternals tools. I haven't installed any antivirus software in about 4 years now.

What do they have to do with protection ? ?

Nothing, but they are the best at removing viruses.

Nothing, but they are the best at removing viruses.

As for the protection, firewalls and not randomly running unknown exe files.

Nothing, but they are the best at removing viruses.

As for the protection, firewalls and not randomly running unknown exe files.

Terrorism and cyber attacks main threats to Britain
David Cameron, who co-wrote the foreword to the report with Nick Clegg Photo: AP

The new National Security Strategy identifies four ''tier one'' risks which, it says, must be the Government's highest priority.
The other major threats are a large scale accident or natural hazard such as pandemic flu and an international military crisis which could draw in the UK and its allies. ...

What if your computer shot bullets at you?

Greetings.

There are numerous (support) YOUTUBE tutorials on INKSCAPE software.

A gentleman who goes by PhotoAdvanced2 starts at IMBECILE and progress's from there.

Just a heads up. Thank you for your help.
Probably would have been wise to post this in the original Topic so people know what you're talking about...just SAYIN...

Hi all, I saw an old MAP a few days ago about the buildings in a city and how tall they were. In the map”s legend were the symbols foe each GROUP (1-4 floor; 5-8 and so on).
Does anyone know what software was used ? How can I make such a map ? Any starting points ?
I know that there is a software that can ”read” the height according to the light/black shade on a orthophotomap.
Eventually I want to do this map using ArcMap software.
ThanksA company CALLED Pitney Bowes has a software called "Mapinfo Professional (current version =11.5 ) that MAY or may not include the ability to incorporate height designations to buildings. They offer the software for a free trial period. Also there is this site that seems to offer many resources pertaining to mapping. They welcome direct contact so it could be worth your while to contact them with regards to your quest.
http://www.mapmart.com/Products/GISSoftware/MapInfo/MapInfoProfessional.aspx
truenorth
P.S. No answers to your quest on yahoo yet so hopefully we here at CH are able to assist you.

When I got my new computer I purchased Malwarebytes (NOT the free version). I'm not sure if this also provides antivirus protection. Does anyone know for sure? If it does not, can you recommend a free antivirus program compatible with MWB?MalwareBytes is not a full fledged anti virus app. It should be used in conjunction with one. There are many free good options including Avira, Avast, Nod, etc. You may also want to look at paid AV's and decide which is best for you.In addition to Allan's comments. You certainly have not made a bad decision to have and use Malwarebytes on a regular basis in addition to any virus software you might use. Today i performed a routine scan with Malwarebytes on a computer that is running a free version of Avast anti-virus with all the latest virus definitions and in spite of that malwarebytes found 4 items not found by Avast.In addition an anti virus program should be installed to be running constantly when the computer is on so as to detect any malicious item before it can get on the computer. Malwarebytes can only be RUN at a user demand so it is not in a position to prevent an infection. Only to detect and remove it after the fact.truenorthQuote from: truenorth on February 17, 2013, 05:50:03 PM

Malwarebytes can only be run at a user demand so it is not in a position to prevent an infection. Only to detect and remove it after the fact.truenorth

The free version of MWB is an on demand version. The Pro Version I paid for runs constantly & has successfully blocked malware while I've been surfing.

Just thought you might want to know. Thanks to both of you for your input.

Malwarebytes Anti-Malware is not meant to be a replacement for antivirus software. Malwarebytes Anti-Malware is a complementary but essential program which detects and removes zero-day malware and "Malware in the Wild". This includes malicious programs and files, such as viruses, worms, trojans, rootkits, dialers, spyware, and rogue APPLICATIONS that many antivirus programs do not detect or cannot fully remove. It is important to note that Malwarebytes Anti-Malware works well and should run alongside antivirus software without conflicts. In some rare instances, exclusions may NEED to be set for your specific antivirus product to achieve the best possible system performance.

I am trying to add SMS functionality to Outlook to make a notfication system (e-mail and SMS.) I GOT an idea from this page http://www.sms-integration.com/setup-instructions-for-sending-sms-from-microsoft-outlook-2007-84.html It seems great.
Outlook Mobile Services makes it possible to CREATE and send SMS messages in Outlook.

I can use OMS only over HTTPS (ENCRYPTED) channel. I can create a self-signed certificate with the use of makecert program.

To create a self-signed certificate Ineed mkcert script. Is it correct if I type one of the following commands into Command Prompt?
mkcert

or
mkcert

Have you done this before? Will it work?

Regards,

Leslie
Doesn't the article you cited CONTAIN a LINK to a makecert program?

XYplorer is a tabbed file MANAGER for Windows. It FEATURES a powerful file search, a versatile preview, a highly customizable INTERFACE, optional DUAL pane, and a large array of unique ways to efficiently automate frequently recurring tasks.

http://www.giveawayoftheday.com/

Here's my problem:

Lost my password BIOS. Well to be truth it was my dad...
So I'm trying to FLASH my BIOS from Phoenix.
Futhermore I bought new RAM DIMMs (2x2GB from Corsair). And those are giving me BSOD.

My searching is near to no results at all for my PC: Toshiba SATELLITE A200-223.

Here are my questions:

• Knowing WinPhlash or other program (PLEASE list it) is any way to flash through Windows, being an Original or Modified BIOS version?
• It is possible to flash a BIOS with different versions? Example, mine is Satellite A200-223 to another version XXXXX

One thing to try is to remove the CMOS battery for about 5 - 10 mins and see if this will reset your bios.

Hi,

If i save my work by default in office 2013, can it be opened with 2010 or 2007 (another computer)?
Or can 2007 &AMP; 2010 opened with 2013?

Thank you.No, EXCEPT as noted herein. The default format for Office 2013 is Dog Food.
From Office 2007 onward it should be the same. Older Office suites won't read the MS XML format, which has been called Dog Food. Which is very kind.
For reference:
http://www.theregister.co.uk/2012/08/15/office_2013_strict_open_xml/


It's also worth pointing out that you can use file -&GT; "save as" to use a different format or certain compatibility options. This can also let you save a, for example, word 2000 or 2003 document, or RTF, plain text, PDF, etc.
Thank you for the info, both of you.I messed about with this a bit immediately after installing Office 2013; if memory serves, Without Changing any options, the resulting Save File opened just fine in Office 2007.Quote from: BC_Programmer on February 18, 2013, 12:49:58 AM

I messed about with this a bit immediately after installing Office 2013; if memory serves, Without Changing any options, the resulting Save File opened just fine in Office 2007.

Im running windows 7 sp1 6gb ram core i3 2350m .

I been using the black glass cpu meter and recently after restarting my pc the percent on ram and cpu is blank but it still works just no percent usage. I uninstalled it and reinstall but still not working.

All other GADGETS work.

ThanksMS dropped support for all their gadgets awhile back due to security concerns...
You may want to try a 3rd party app for your needs...
A quick search yielded a bunch of OPTIONS...I've used the regular CPU Meter gadget for months. I presume this is not the same as your "black glass cpu meter". I've had no ISSUES with it. However, we do now need to weigh using gadgets VS. using a 3rd party app due to the security issue patio mentioned. QUOTE from: soybean on February 15, 2013, 07:50:18 PM

I've used the regular CPU Meter gadget for months. I presume this is not the same as your "black glass cpu meter". I've had no issues with it. However, we do now need to weigh using gadgets vs. using a 3rd party app due to the security issue patio mentioned.

Quote from: Salmon Trout on February 17, 2013, 02:41:22 AM

I have done some tests, and subsequently some RESEARCH. 7zip does not HANDLE multipart zip files created by other compression utilities including WinZip. I apologise for misleading people by saying anything different.

Although i don't have any native ZIPPED files to test on you may want to try WinZip...as i said it's worth a shot.

WinRAR would be another alternative to try as well.
Both have a Free/trial version.

I have an EXCEL workbook that I have been using for years. When doing some editing today on a sheet the 'not enough memory' message came up. I tried to delete some sheets and charts no longer needed but could not do that. This computer has Windows 98 and I am using EXCEL2000This may help: http://support.microsoft.com/kb/313275Thank you soybean. It explains the limits in Excel and I appear to have exceeded ONE of these limits. I had got over the problem temporarily by deleting some charts. However, today when I created a new chart, links to the Sheets disappeared and I cannot find them. It looks as though today's edit is lost and I will have to go back to the .bak version. I will then implement what is advised in that very useful link you PROVIDED. I have made some progress since the LAST post. I used in Edit the Delete Sheet to remove some additional charts. The Sheets were still not on the bar so I closed the file and then opened it again, presuming that process would clean up the memory and other activities. That worked. So I now have a worksheet with the updated editing, and knowledge of how to prevent the problem re-occurring. Thanks, soybean."Not enough memory" has cropped up again in this Excel 2000 workbook. I started to Move some of the Sheets to another workbook, as I did last time. However, I tried to resume that process today but when I loaded the spreadsheet the message came up, a wineglass appeared and the spreadsheet did not load. I went to http://support.microsoft.com/kb/305498 and carried out the procedure to refresh Office as this was supposed to fix the memory problem. It did not for my Windows 98SE SYSTEM and Excel 2000.

Hi Everyone
I have come across a strange issue on a pc running Excel 2007.
A spreadsheet is created on a pc using Excel 2010 - and withing the workbook are charts (their DATA is within the same sheet as the chart) it then gets saved onto a flash drive and then opened on a pc running Excel 2007. When opening the file in 2007 all the data is there but the charts are gone. There are just empty spaces where the charts were.
Could it be a compatibility issue between 2007 and 2010. I have tried it on another pc, also running 2010 and everything is there, charts included.

Please note, I have checked for viruses and had a look for any settings in 2007 that might disable charts.

Thanks in advanceDoes Excel 2010 has an option under the Save As command to save as Excel 2007? I realize it may not since the both USE the .xlsx file format, as opposed to the older (Excel 2003 and prior) .xls format. 2010 Does not give a 2007 save format. But we have tried saving it as a .xls (2003 and prior) then opening it with the 2007 - but the charts are STILL missing. I'm thinking it could be a compatibility issue but I cant load 2010 as its a company pc.
So I'm wondering if there is another work around for this.
ThanksHave you installed the MS Compatability PACK? If not, try this link. http://www.microsoft.com/en-us/download/details.aspx?id=3Quote from: cwhartley on January 17, 2013, 07:03:49 AM

Have you installed the MS Compatability Pack? If not, try this link. http://www.microsoft.com/en-us/download/details.aspx?id=3

anyone who can help me convert a windows movie maker project to winamp media file?
i cannot open my saved video from windows movie maker to winamp... is it possible?

What is the format of your Windows Movie Maker movie?Quote from: Broni on November 27, 2007, 09:31:25 PM

What is the format of your Windows Movie Maker movie?

listen to broni. hes smarter than me

What is the format of your Windows Movie Maker movie?

In Windows Movie Maker, you have an option to save your project as ".avi" file, which is recognized by most movie players.

1. Special effects USED to introduce slides in a presentation are called

a. Effects

b. Custom animations

c. Transitions

d. Present animations



2. What is the purpose of indexing?

a. To reduce table size

b. To speedup data search

c. Both a & b

d. None of the above



3. You can edit a cell in spreadsheet by

a. Clicking the formula button

b. Double clicking the cell to edit it in place

c. Selecting Edit > Edit cell from the menu

d. None of the above



4. Which function will calculate the number of workdays between 6/11/2012 and 8/12/2012 in spreadsheet?

a. Workday

b. Date

c. Net workdays

d. All of above



5. Which of the following is not a valid data type in Excel?

a. Number

b. Character

c. Label

d. Date/time





6. The file type ___ INDICATES the file is a word document

a. .msw

b. .wor

c. .wrd

d. .doc



7. How can you make the selected character superscripted in word document?

a. Ctrl+=

b. Ctrl+Shift+=

c. Alt+Ctrl+Shift+=

d. None of the above



8. What is the short cut key to open Font dialog box in MS Word?

a. Ctrl+F

b. Alt+Ctrl+F

c. Ctrl+D

d. Ctrl+Shift+D



9. A ___ acts as a security buffer between a company’s private network and all extern

a. Firewall

b. Password

c. Disaster recovery plan

d. VIRUS checker



10. Protecting the data from unauthorized access is called

a. Data inaccessibility

b. Data encryption

c. Data security

d. Data validation



11. Which of the following is responsible for coordinating various operations using timing signals?

a. Arithmetic-logic unit

b. Control unit

c. Memory unit

d. I/O unit



12. A computer consists of

a. A central processing unit

b. Control unit

c. Memory unit

d. I/O unit



13. Which of the following package is used to create slides for presentation?

a. MS-Word

b. MS-Excel

c. MS-PowerPoint

d. MS-Access



14. Which of the following is DBMS?

a. MS-Word

b. MS-Excel

c. MS-PowerPoint

d. MS-Access



15. Which of the following formula is entered correctly?

a. =sum( A1A10: )

b. =sum( :A1A10 )

c. =sum ( A1:A10 )

d. All of above



16. Each excel file is called a workbook, because

a. It can contain text and data

b. It can be modified

c. It can contain many sheets

d. You have to work hard to create it



17. Which of the following shortcut key is used to select all the contents of a MS Word document?

a. Ctrl+B

b. Ctrl+A

c. Ctrl+C

d. Ctrl+V



18. In word processing, the task of changing the appearance of a document is called

a. Formatting

b. Editing

c. Proofing

d. Inserting



19. MS Word is an example of

a. Word processor

b. Spreadsheet

c. Presentation

d. DBMs



20. Which of the following network DEVICE is used to connect different networks?

a. Hub

b. Switch

c. Router

d. None of above



21. The output quality of a printer is measured by

a. Dots per square inch

b. Dots per inch

c. Dots printed per unit time

d. All of the above



22. Which of the following memory is volatile?

a. RAM

b. ROM

c. PROM

d. EPROM



23. Which command will you choose to convert a column of data into row?

a. Cut and Paste

b. Edit >> Paste Special >> Transpose

c. Both a and b

d. None of the above



24. How can you update the values of formula cells if Auto Calculate mode of Excel is disabled?

a. F8

b. F9

c. F10

d. F11



25. How can you show or hide the gridlines in Excel worksheet?

a. Go to Tools >> Options >> View tab and mark or remove the check box named Gridline

b. Check gridline tool on forms toolbar

c. Both a and b

d. None of the above



26. What is the purpose of inserting header and footer in document?

a. To enhance the overall appearance of the document

b. To mark the starting and ending of page

c. To make large documents more readable

d. To allow page headers and footers appear on document when printed



27. Which features help you to setup document page size in Microsoft Word?

a. Page setup

b. Print setup

c. Styles

d. Print preview



28. Which of the following is the symptom of the virus?

a. It must execute itself

b. It often places its own code in the part of execution of another program

c. It must replicate itself

d. All of the above



29. Which of the following protocol is used to receive email?

a. SMTP

b. POP3

c. TCP/IP

d. None of the above



30. Which of the following is the operating system?

a. Microsoft Word

b. Microsoft Excel

c. Microsoft Windows 7

d. All of aboveIs this homework?
Would you also like SOMEONE to sit your exams too?Loads of product bias in this question paper. I thought that schools shied away from that nowadays.I don't see anything to be gained by leaving this thread open.I got 26 out of 30....

I paid ~$50 for Nero a few years ago but they no longer support my VERSION. I need to EDIT a family video my sister made in 2008 that is stored on my external HD. Can someone SUGGEST trustworthy free software I can download to do this? ($ is LOW these days).
As ALWAYS,
Thanks
Mike

I am thinking of buying an Acer travelmate P253 with both windows 7 and 8 loaded on the laptop. When I look for reviews of this computer on the UK site it says it is a P253-M with only windows 8 installed.

I live in Australia and this computer comes up with both systems loaded on a P253 (no M after the number) Can I trust this is genuine from the manufacturers? If a computer is refurbished how would you know by going into the SYSTEM, would you be able to tell?


thanks
Leigh


Most systems are sold with a single OS licensed. However for a period of time back in the days of Windows Vista, some systems were being sold with 2 keys on the Microsoft Labels for those who wanted to run Windows XP instead of Vista. Legally you can only run one of the OS, and not both.

I haven't seen keys for customer operating system choices yet for Windows 7 or 8 on the genuine microsoft key labels. Microsoft is still pretty firm with forcing PEOPLE to Windows 8 and leaving Windows 7 in the dust for new systems as well as they are offering Windows 8 at a fraction of the cost of Windows 7 to try to get people to go with Windows 8 vs 7. I keep seeing limited time offer deals for $40 for Windows 8 because Microsoft has been having a hard time selling the product.I dont know of any retailers that will sell/ship a PC with dual boot OS's...
But your best bet would be to buy a Win7 PC that includes the Free Upgrade to Win8...

It may be different in Australia though...very redundant portion of an online game on facebook. I dont have 2 hrs a day to burn up the (energy) in dedundant fighting in the game to convert it to other FORMS of VALUE within the game so I have a batch file that performs a ping Huuuuhhh ? ?

Im TRYING to FIND a DOWNLOAD to get me through the SEMESTER just for outlook 2010. This will be the only time Im useing it an need it here today. I tried useing GOOGLE to not find anythingBuy it. Thread locked.

I go to save videos USING windows movie maker and tells me i don't have enough disk space. and something about video codec. I re partitioned hard drive to get more disk space and still doesn't work. I even tried to save video to a USB drive and also didn't work. This is really FRUSTRATING. I recently installed camtasia video EDITOR and have problem when up loading video in editor, it say something about video codec?