Explore topic-wise InterviewSolutions in .

I have two PC one is window 7 and one is XP pro .I am trying to use both and share one screen , key board and mouth . I am using KVM switch .The switch does not recognize the window 7 ,but does WELL with XP both are on the same network
Any idea ??Keyboard and mouth ? ?

Couldnt resist...

Is the XVM SETUP under both PC/OSes ? ?No set up is NEEDED for either computer as far as I know for the KVM attached to both .

Mouse or mouth both do the same right ...Get another keyboard and mouth. What brand and model is the KVM switch? Has it ever worked with Windows 10? Have you read a USER's manual which explains how to use the switch?

From LAST 1 week..my sony Vaio laptop has not started...
error comes LIKE this ' windows failed to start '
Now sony customer CARE gave 2 option.
I online recovery . & 2nd recovery using recovery disk..

Now option 1 online recovery is not working ..
option 2 ..i dont have disk...
...
few years back when i had done online system recovery . My data in D and E drive was not lost...

Now is there any chances to loss data in D and E drive if get recovery disk EITHER from friend or at sony service center..
.

Pls help In any event, you should absolutely backup all data you want to preserve on EXTERNAL media (DVD or CD, flash drive, external hard drive, or cloud storage).

Regarding recovery, do you have a recovery partition on your computer? If not, then you should obtain a recovery disk from Sony, not your friend.

Vista service pack 2
I am trying to install some family history software to read the 1881 Census on CDs. The people who published this no longer support this system so I can't get help there.
I have installed the Viewer but on trying to add Resource File (CD of Census) I get a box come up saying, "Run-time error '5' Invalid procedure or argument".

This has HAPPENED after reinstalling Vista after trying Ubuntu which I did not like. I have tried reinstalling Vista a couple of times with the same result and clicking on "Repair" during instillation.

Any suggestions how to fix this please?What OS version did this software run last correctly on? Id go with a virtual system and run the software in its intended OS as a possible solution.

Like some old software I have wont run on newer Windows 7 64-bit, but in a virtual environment it runs without issues. Games are hit and miss with this as for some virtual environments are not compatible with early games etc, but the software your running should just show statistical data and so its not graphically intense and so it should run.

As far as running it through ubuntu I am guessing you ran it through WINE?Thanks for your reply.
It last ran on this Vista laptop.
I have a Windows 7 computer that is 64 bit but the 1881 Census CDs need 32 bit. How could I run this on Windows 7 please?If you have Windows 7 Professional, Enterprise, or Ultimate, you can download and install Microsoft's free Windows XP Mode and Windows Virtual PC. This runs a COPY of XP in a 32-bit virtual machine. Unfortunately, if you're running a 64-bit version of Vista, Windows 8, or Windows 7 Home, that option is closed for you.

Its odd that the program is 32-bit and giving your troubles with 64-bit as for I run tons of 32-bit apps and programs in Windows 7 64-bit myself. If the program is 16 bit then there is a definite problem with 64-bit OS and it. A 32-bit OS supports both 16 and 32-bit, but 64-bit OS would have to USE virtualization to support 16 bit.Try running the program as Admin.Be nice to know what app this is...Thanks for the answers.
I have run as Administrator.
System on Windows 7 is Windows & Home Premium.
Not sure what you mean by what A[[ Patio? (Probably dimness of my old age. ) This is a collection of CDs that has the British 1881 Census on it. They used to be in every library around here. As I have difficulty getting out I purchased my own set. But now can't access them.
As: http://www.ebay.co.uk/itm/1881-British-Census-National-Index-Family-Search-LDS-25-CD-set-Genealogy-/291844705782?hash=item43f34ccdf6:g:e8sAAOSwWnFWCFI5

http://www.ebay.co.uk/itm/1881-British-Census-National-Index-Family-History-Resource-24-CD-Rom-Set-/371694640933?hash=item568aba1f25:g:u1sAAOSwRgJXmJq8

Reading through the adverts one mentions 16 Bit? But I plead ignorance there. It certainly used to run on Vista.If running as administrator doesn't work, there is likely no way to fix it. The Error message is coming from Visual Basic and is sufficiently generic of an error message to make it rather difficult to determine solutions. Best guess based on my former work with Visual Basic would be that it is trying to utilize a Library package that is no longer available on Windows 7.

As far as the software goes, it looks to have changed hands several times. It was originally "Folio Views" by Folio Software in 1990 when the 1881 Census project was started by the LDS. By 1999 it was effectively owned by "Open Market"; in 2001 NextPage purchased the product rights and they started to LICENSE (rather than sell) the software; they discontinued all Folio Products by 2007. A Norwegian company, "Fast Search & Transfer" Then purchased Folio Views, among other products from NextPage, they then released "ProPublish 4.1" in 2009, the "Fast Search and Transfer" company was purchased by Microsoft, who then turned around and sold it to Rocket Software.

Rocket Software is the current OWNER of the software and more importantly, they have released versions of Folio Software which support Windows 7.

Their product page for Folio Software 4.9 can be found here. It is likely if you can get a hold of the newer product version it could be used for the data on the CDs.



Thanks. Looks like I look out for a cheap used Vista machine.I found an answer! Started in Safe Mode and was able to load the 1881 Census. Restarted in normal mode and now I can view the census. Much happiness though realise I should have tried this earlier. I have learnt a little more.

Hi,

I'm trying to share my D: drive (not simultaneously of course) between an XP VM and a Win7 VM. Even though the username is the same on both VMs, when I try to access the files Win7 says I have no PERMISSION to my files I created on XP.

How does Windows manage identities and file ownership (like Unix UIDs)? And how do I make Win7 give my user the same attributes as the same user on XP.

PS: I don't have an AD domain controller, so I can't use that to make the users the same.

PPS: Just had a thought.. I could get concurrent access and user control with Samba, but not sure how to do seamless user authentication without AD. Perhaps I could use a junction to LINK to the Samba drive. A Network share should work for both, assuming PRIVILEGES have been set correctly and firewall configured to allow. What i have done for my virtual machines is map a network share to a drive letter. Then reference that drive letter that is the share between all. Permissions can be set to EVERYONE if you working behind a firewall and no one else on your network to mess with your data. I use this configuration with it set to EVERYONE having Read/Write access on my private network which WORKS better than trying to match up users that are the same between varying OS versions. Setting to Everyone usually is the fix, but only a fix if used on a network that is safe to set to Everyone.Alternately you should be able to right clik the drive in the Admin account and select "take ownership"...Actually - I think the easiest solution is now that I already have a D: drive on the WinXP VM, just share it with CIFS to the Win7 VM.

The only remaining 2 issues are (1) that the Win7 VM is 95% busy CPU when it should be idle, and (2) working out how tp tell Win7 to use the network share as the user's home area. Junctions don't seem to cut the mustard for Win7 in the way they do on XP.

Things were starting to act up the other day. It would freeze, and I would get the unresponsive plugin box, so I had to keep stopping that. That's what I was originally going to post about. But then a you tube video wouldn't run, it said consider restarting your source. Tried to shut down, but "shutting down" remained on the screen but nothing happened. Did a hard shutdown and now when I enter ny password, it says "The user profile service service failed the logon" and "User profile cannot be loaded" I've shut it down and tried again but it's the same thing. So now what do I do? I have windows7 and the problems I was having was with Firefox.1. What happens when you try to boot in SAFE mode?
2. How about LAST known good configuration?
3. Post the brand and exact model of computer. Also Windows 32 bit or 64 bit? What version of Windows 7? (Home Premium, PRO or one of the others)
4. What sort of restore, recovery, backups, or Windows disks do you have?Boot to safemode...and run a repair on the user account...I was able to get in through safe mode and ran a system restore point from last WEEK. I also ran malwarebytes anti-malware program. Is there another repair program I should run? Anything I can do to prevent the unresponsive plugins to occur, causing things to freeze? Whats CRASHING ? ?...you mention plugins so i assume a browser...which one ? ?

I used to be able to browse Craigslist at work, now the IMAGES are appearing as little x's. I don't have any other issues on other sites with images that I am aware of. I'm using IE with windows7. Because I'm at work, I'm pretty restricted on any setting changes, like trying it on Firefox. Is there anything I can do or try? Ask your system administrator.
Wild guess...
The work server might have a filter that prevents workers from viewing porn images. Somehow it flags the images on Craigslis.It's highly likely they want your workload to increase....Quote

Because I'm at work, I'm pretty restricted on any setting changes, like trying it on Firefox. Is there anything I can do or try?

I don't really remember how it started but my laptop won't let me open any programs, and when I try to it says "The program can't START because WINHTTP.dll is missing from your COMPUTER." I checked the recycle bin and I'm pretty sure I didn't THROW it away. Please help, this is really important to me as I need this laptop for work and such. From a search:
https://msdn.microsoft.com/en-us/library/windows/desktop/aa384273(v=vs.85).aspx
Quote

Purpose
Microsoft Windows HTTP Services (WinHTTP) provides developers with an HTTP client application programming interface (API) to send requests through the HTTP protocol to other HTTP servers.
Where applicable
WinHTTP SUPPORTS desktop client applications, Windows services, and Windows server-based applications.

Chrome OS is an operating system designed by Google that is based on the Linux kernel and uses the Google Chrome web browser as its principal user interface. As a result, Chrome OS primarily supports web applications.

Hi -
I have a Lenovo computer and am running Windows 7. I want to wipe the computer and get it back to factory conditions. I have "Dban.org" but I was wondering if there are others which might be better. Thanks for suggestions. Bob

It has been weeks from the last post fro the original poster. Back on September 10, 2016, he said he needed IE browser.
The link below will install the full IE 11 program.
https://support.microsoft.com/en-us/help/18520/download-internet-explorer-11-offline-installer

I changed one REGISTRY entry to make the pages bigger. But now I can't see or move the page to see the sides.
Anyone know which part and sub-part I changed?? Feeling really bad I did not write this down

HeinzWhy on earth would use regedit to do so ? ?Can you still get to the START -> Run to run regedit again and undo what you did?Quote from: DaveLembke on August 31, 2016, 03:49:34 PM

Can you still get to the start -> Run to run regedit again and undo what you did?

need help finding this part of the register so I can reverse this

hi i NEED help asap, i EDITED a pdf and need to TRANSFER to ORIGINAL document ANYONE help
Why are you not editing the original, and then creating a pdf then from that?I think you can do that using Adobe Acrobat DC. Check out their webpage.

Long story SHORT, Acer Laptop Win 7 Home Prem. X64 was working fine & then I dropped it five feet from the ground. Then when I started it hung on the Win 7 LOGO.

Then I inserted the reinstall USB & entered command prompts & now it's not even displaying a logo. I'm assuming SOMETHING in the hard disc got partially damaged.

There are 2 scenarios.

1] When I go to BIOS and leave the hard drive on AHCI mode & try to start up, I get the 'No bootable device -- insert boot disk & press enter' error.

2] When I go to BIOS and the hard drive on IDE mode & try to start up, I get the 'BootMgr is missing press any key to restart' error.


BIOS detects hard drive. EaseUS partition manager detects the drive but can't recover any boot partitions.

I already tried the Startup Repair many times over, no luck.

Here are some of the commands I entered in to the command prompt from the reinstall disc and still no luck.

Code: [Select]bootrec /FixMbr
bootrec /FixBoot
bootrec /RebuildBcd
chkdsk /f C:
chkdsk /r C:
chkdsk
Also did these :

Code: [Select]Command #1 – diskpart
Command #2 – list disk
Command #3 – select disk X
Command #4 – list partition
Command #5 – select partition 2
Command #6 – active
Command #7 – exit
And tried these but RAN into errors on one of these steps I believe so I didn't complete the steps...

Code: [Select]bcdedit /export C:\BCD_Backup
c:
cd boot
attrib bcd -s -h -r
ren c:\boot\bcd bcd.old
bootrec /RebuildBcd
Nothing worked. Hard Drive is a Hitachi HTS545050B9A300 . I haven't formatted the disc as I have important files on there,

Any little bit of help is appreciated. Thanks!
[/size][/color]If you are lucky, the hard drive got damaged, and you could buy a new one and reinstall Windows. If you are less lucky, the motherboard got cracked or otherwise damaged, in which case the device is scrap. It might be worth taking the device to a repair shop in case RAM modules need reseating.
Well here's what the Windows installation looks like, it seems to be recognizing the windows partition but unsure as to how to proceed

There is no Win install showing in that pic...it's asking where you want to install to if you look at it...

It would help if it was a full screenshot.Quote

BIOS detects hard drive. EaseUS partition manager detects the drive but can't recover any boot partitions.

soybean -
I yield to an expert, which I know you are because you have helped me in the past, HOWEVER, I use the ADDRESS in the lower right corner a lot. I have no idea where it comes from. BobQuote from: bobhlgh on September 13, 2016, 12:12:18 PM

soybean -
I yield to an expert, which I know you are because you have helped me in the past, HOWEVER, I use the address in the lower right corner a lot. I have no idea where it comes from. Bob

I have found other people who did not know about the address bar in the lower right corner. Right click on the strip that has the time and date.

soybean -
As I said, I don't know where it comes from but I use it. If you right click in the space to the left of the time and date a little panel pops up. in this panel is an "address". Click on that and an address space shows.

This has gotten out of hand. When I said the address was in the right corner it was a mistake. The address space is in the upper LEFT and in the lower Right. That said I suggest we drop the whole thing. I can use Google Chrome and everything is fine.

I WANT to know about the WINDOWS license keys. can i use product key to another PC. My PC is dead and i upgraded my PC and I don't want to buy a separate OS to PC. Can i use old product key to the latest computer. IS this legal from Microsoft end or MS will let me banned or blocked my Windows Professional Product key.If license is OEM it is tied to original HARDWARE. If it is full retail it can be transferred from one machine to another, but must be uninstalled from first machine.

I started using Sea MONKEY as an alternative browser (yesterday) and the attached message came up.



[attachment DELETED by admin to conserve SPACE]HI - I've DECIDED to withdraw from this problem. It does not look as though it can be solved. Can you please close the thread.

Hi,

My monitor wasn't staying on. I couldn't restart my computer so I hard booted it. When it comes back up, the display is 4 bit. I try to change it, it won't change. I updated the video card, nothing. I've restarted the computer and still nothing. Not sure what I need to do. I appreciate any help.

Thanks!What do you mean by "4 bit" colour? 4 bit greyscale or 16 color? Did you replace the video card, or update the drivers? Did you use the right ones and do it properly?I didn't replace or change anything on my computer. It was working fine until the monitor acted like it wasn't ATTACHED to my computer.

When I go to change the display under display settings, I'll try to set to resolution to high with the colors at "highest 32 bit", I will hit apply and then ok to "do you want to keep these display settings" and it just goes back to saying color "lowest 4 bit".

What is your system model? I can help finding correct video drivers?
What do you mean by 'updated the video card' ?? How did you do this?? (Basically i'm repeating Salmon), but we could do with 'exact' information?

Quote from: Salmon Trout on April 20, 2011, 12:05:22 AM

Did you use the right ones and do it properly?

I went into device manager, click on the NVIDIA GeForce 8400 GS and click "update driver software". It searched online for software, found it and updated. It says my driver software for my device is up to date. However right now, looking in the device manager, under display adapters, the Ge Force is listed with a little yellow triangle in front of it.

I uninstalled the Ge Force, rebooted and then had windows reinstall it. Nothing has changed.

I went to the given website and downloaded that update. It's still doing what it was doing before.

Hello, yesterday i turned off computer and everything was working perfectly. today i turned it on and i cant login to my user account and theres only 1 user (me). my password has 2 's and the ctrl and alt were disabled i think because i also tried using the onscreen keyboard and cant make the SYMBOLS either.
my keyboard is portuguese and uses alt + ctrl+2 to make these symbols. HELP OR I CANT LOGIN TO MY COMPUTER! (not this 1).

Remember i already tried the Onscreen keyboard! ctrl and alt doesnt work eitherBoot into the Admin account via safemode and CHANGE your account settings back to your liking...Quote from: patio on April 22, 2011, 09:09:12 AM

Boot into the Admin account via safemode and change your account settings back to your liking...

that is my admin account.

No, it isn't. the administrator account is hidden, you have to perform a registry tweak or start in safe mode to even see it. Your account is merely a member of the administrators group; it's still a separate account, though. It might not even have a password.

If the keyboard for some reason reverted to the "default" you can create @ signs using Shift+2.

i go in safe mode and cant see administrator account

i go in safe mode and cant see administrator account

Have you tried the English way to get the @ symbol, by using shift + ' ??

while watching tv through my pc after 45 minutes or so the screen will suddenly FREEZE showing strange patterns of color and the keyboard and MOUSE are inoperable also, i have tried a different tuner stick to no avail, the only way i can get the pc GOING again is to shut it down on the tower and then restart it but, the problem will always occur again. my pc is only 5 months old and has already been BACK to where i purchased it from and has not been fixed. could the problem be a sound or graghics card issue?You might wanna think of using your warranty here before its too LATE to save you from the troubles of replacing any parts.I have the same problem... i think it has something to do with a driver error but im not sure

Quote from: miltonmeier on April 22, 2011, 06:35:37 AM

while watching tv through my pc after 45 minutes or so the screen will suddenly freeze showing strange patterns of color and the keyboard and mouse are inoperable also, i have tried a different tuner stick to no avail, the only way i can get the pc going again is to shut it down on the tower and then restart it but, the problem will always occur again. my pc is only 5 months old and has already been back to where i purchased it from and has not been fixed. could the problem be a sound or graghics card issue?

I have looked through recent posts, but there isn't the same model as mine having this problem.
My CPU clicks and beeps about 6 times on start up(now it doesn't stop beeping!)
It then does either of the following things:
Shows a screen with 'American megatrends' on it with info about the computer, such as stepping, cache,auto detect etc on it which doesn't seem to let me do anything. Down the BOTTOM it has press F1 to continue... when I do I get ... reboot and select proper boot device or Insert boot media in selected boot device and press a key.
I then can't do anything except turn it off.
I don't have any cd's or anything for the system.
It is still under MANUFACTURER's WARRANTY but I'm not sure if they will fix this?
I can get into the set up utility but I'm not sure what to do here?
If anyone has any advice, I would really appreciate it!
Thanks in advance...If under warranty I'd take advantage of that. If you break the seal to inspect the ISSUE you will void your warranty.
Thanks, yes I think that's the smart thing to do.
It would have to happen on the longest public weekend in history!!!(In Australia)

I have an, HP Officejet 5600 All-in-one printer, and a newly purchased Dell Inspiron LAPTOP with windows 7. My problem is I cannot download the software because windows 7 is not supported by my printer. What can I do?I'm afraid there's not much to do. If your printer doesn't support W7 you can either get a new printer or install a different (or second) OS.It's supported: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&lang=en&product=441123&What do I do with your answer? I am not very GOOD with computers but need one and a printer for work.Download and install the software at the link posted by Computer_Commando. What else? That's what I get for ASSUMING you checked Karl. Apparently HP DOES provide a W7 driver.I just tried downloading COMMANDOS reply and it got SHUT down and recommended not to continue.I just downloaded it with no problem.

My computer screen goes black, and it seems to coincide with overheating. It only happens when I'm watching something online. The screen goes black and I can usually hear the sound for a while before the computer just goes to SLEEP. I cannot PULL it out of the "sleep" mode, I just have to shut it down manually and start it up again. I was wondering if this a video driver issue, or if it was possibly that because I have to keep my laptop plugged in all the time (dead battery) the constant electrical input overloads and overheats the computer and causes this. I have an HP G60 with Windows VISTA. Laptops are more susceptible to overheat than DESKTOP. An additional USB powered external cooling fan will help lower the overheat. However check your laptop for dust and internal fan if its running fine. You could use a free hardware temp. monitoring software to confirm the heat problem such a s SIW or HWMonitor. Check also any power options set and disable it. You could also TEST issue by running safemode.
http://download.cnet.com/SIW/3000-2094_4-10326678.hml
http://www.cpuid.com/softwares/hwmonitor.html

I have a GATEWAY laptop with a Dual Core processor and 1 gig of memory. I am atempting to upgrade from Windows VISTA Home edition to Windowa 7 Ultimate.I have attempted the upgrade path anf the clean install path both with the same result.Windows cannot verify the digital SIGNATURE for this file.
File \windows\system32\winload.exe
status: 0xc0000428
The SYSTEM will not allow me to temporarily disable driver signature enforcement.
I have TRIED with the following commands and but pressing f8.
Bcdedit.exe /set nointegritychecks ON
bcdedit.exe /set loadoptions DDISABLE_INTEGRITY_CHECKS
bcdedit.exe /set TESTSIGNING ON
The system just boots with the same error.
HELPTry this suggestion -> http://www.lifeworldblog.com/computers/windows-7/windows-cannot-verify-the-digital-signature-for-winload-exe

When watching a youtube or similar VIDEO or LISTENING to a podcast it runs for like 40-60sec and than just stops and never resumes. It's not that the computer freezes - the video is still 'downloading' and everything else works jine but it the video simply STAYS like this.
Any SUGGESTIONS?

Win7 won't reconnaissance when I press a specific button (Ö) it will only type it if I hold it down, but then I get like you usually hold down a key. It's nothing wrong with my keyboard, if I use the virtual one that windows have by default it won't work there ether, I have been trying to find where Windows save the configuration for the keys, but haven't found anything yet. Any help would be great.

I don't understand your question. Whatever you think "reconnaissance" means, it doesn't. What is the problem you are having?I thought it was a little weird, but can only blame my self when I used google translate to find the right word...

Anyway, if I press a the button it will not type anything, but if I hold the button down it works but I get more then one of the same letter, so it's the same as if I would hold down a regular button on any keyboard. But there is nothing wrong with my keyboard, and If I use a virtual keyboard I get the same error, so there must be something wrong with windows.

So in short, my keyboard works, the button wont work if I press it, it only works if I hold it down.What happens in safe mode?It did work just fine in safe mode.Open msconfig and on the General tab choose "selective startup" (uncheck all three items) and reboot. Does the problem still OCCUR? If not, start adding items back to msconfig one or two at a time, rebooting after each change, until the problem reappears and you'll have identified the offending process. This is clearly a time consuming process, but it is the BEST way to determine if some process loading with the system is the cause of your problem.Ok, I did a Diagnostic Startup and then it was working, and then I turned on my Startup items still working, but then I turned on the System service, and I got the error again, after that I disable every Service I COULD except 4 things that I wasn't able to turn off;

ESET Service
Group Policy Client
RPC Endpoint Mapper
Task Sheduler

But even tho those was the only one that was checked I still saw that many other services said it was running, but I still get the error.Ok first off, try to ignore I said "reconnaissance" it is really bothering me, I can't edit so I can't remove it and you guys get mad if I start a new post, but back to topic.

After some time some more testing I saw I couldn't shutdown;

ekrn
enentlog
gpsvc
p2pimsvc
PlugPlay
Power
RpcEptMapper
RpcSs
SamSs
Schedule
Wudfsvc

So it had to be one of those, but every time I start my computer I can type the letter in the "enter password" thingy, so I made a new account and I was able to type the letter in the new account, so I looked on with of those service was not there, but all of them was there, so there is none of them who created the problem, so there must be something on my account that is starting something, but I just can't find it. Nothing in the autostart programs, none of the service as I can see, so I have no clue what is doing this.

So anyone know if you can see EVERYTHING that starts on the account or even BETTER, know where to look?

Hi. TWO questions about windows 7.

Is it worth the upgrade from XP, and when it says ONE user only, does that mean you can only install it on one machine, or is it one desktop and one laptop?

Cheers, guys.

FeenixThere is no direct upgrade path from XP to Windows 7, so you would have to do a clean install of Windows 7. A single user license is for one machine. The one desktop/one laptop THING is for Microsoft Office. I went from XP to Windows 7 when I bought a new PC one year ago, and I am GLAD I did. 10 years old XP feels very old fashioned to me now.

Comprei em 2010 um HP PC Elite Pavilion que trazia pré-instalado o windows vista e com direito ao upgrade para o Windows 7. Eu fiz essa actualização no final de 2010 e daí para cá tenho-me consolado a descobrir as novidades e avanços do Windows 7 comparando-o com o XP e anteriores pois o Vista quase não lhe tomei o gosto.

Pois desde anteontem que o Windows 7 ficou a trabalhar normalmente quando me ausentei para tomar banho sem o desligar pois tenho-o sempre ligado.

Quando regressei do banho ele estava a efectuar a reparação do arranque do sistema. Fui vestir-me e quando regressei ele tinha terminado com a mensagem de que "A reparação do arranque não conseguiu detectar um problema.
E mais informa/aconselha:Se anexou recentemente um dispositivo a este computador, TAL como uma câmara ou um leitor de música portátil, remova-o e reinicie o computador. Se continuar a ver esta mensagem contacte o administrador o do sistema ou o fabricante do computador para obter assistência.

Pois desliguei do computador todos os dispositivos que ao mesmo estavam ligados, mas mesmo ASSIM nunca mais o computador reiniciou pois salta sempre para a reparação do arranque e termina com esta mensagem.

Apresenta ainda duas ligações:
Ver detalhes do diagnóstico e reparação
Ver opções avançadas para suporte e recuperação do sistema.

Nos detalhes do diagnóstico são apresentados os resultados de vários testes: PROCURA de actualizações, disco do sistema, diagnóstico de falha no disco, teste de metadados do disco, teste do sistema operativo de destino, verificar conteúdo do volume, diagnóstico do gestor de arranque, diagnóstico do registo de arranque do sistema, diagnóstico do registo de eventos, verificação do estado interno, teste do estado de arranque.

Todos estes testes indicam como resultado que foi concluído com êxito.

No final ao longo das várias sessões é indicada a Causa Raíz encontrada que no testes anteriores dava " reparação do arranque faz várias tentativas mas continua sem conseguir determinar a causa do problema" mas neste último indica que "O estado do arranque indica que o SO arrancou com êxito" e eu agora a escrever isto penso "oxalá fosse verdade"

Nas opções avançadas aparecem:
Recuperação do arranque;
Restauro do sistema;
Recuperação da Imagem do sistema;
Diagnóstico de memória do Windows;
Linha de comando

Em tentativas anteriores da recuperação do arranque foi dada como causa raíz encontada um ficheiro ci.dll danificado.
Usando a linha de comando pude eliminar esse ficheiro;

No final desta opção aparece Encerrar e Reiniciar
Vou reiniciar para ver se a mensagem era verdadeira

Mas INFELIZMENTE não era e após carregar os ficheiros, aparece por momentos ao fundo da tela a designação "Microsoft Corporation" e volta de novo a fatídica janela com o título reparação do arranque e o texto após a conclusão da tentativa de reparação a informação "Não foi possível iniciar o computador" e a reparação do arranque está a verificar se existem problemas no sistema. Mais informa que se existirem a reparação do arranque procederá a à respectiva correcção.

No final informa que reiniciará para aplicar as correcções

MAS...

Volta à reparação do arranque e à verificação se existem problemas...

O teste de diagnóstico que se obtem como F9 na página inicial do boot passa em todos os testes.
Também o teste da memória é positivo.

A reparação do arranque feito a partir do CD tem o mesmo resultado.
Arrancando pelo CD além da opção da Reparação do Computador existe a da Actualização da Instalação mas que termina com a indicação de que deverá retirar-se o CD para o sistema reiniciar autonomamente e só depois lançar a actualização introduzindo o CD.

ORA mas o SISTEMA NÃO REINICIA.......

ALGUÉM TEM NOVAS IDEIAS DA FORMA DE REPARAR ESTA SITUAÇÃO SEM UMA NOVA INSTALAÇÃO DO SISTEMA E A CORRESPONDENTE PERDA DE TODOS OS DADOS PESSOAIS FICHEIROS E INSTALAÇÕES?Este site só PERMITE Inglês.

Hello,
I need to restore this folder(System32/Drivers/etc) back to its ORIGINAL, can ANYONE give a download of these FILES so I COULD just paste them, or can i do ANYTHING else
ThanxGot a Windows CD/DVD handy ? ?no can i do another way

hello i have a HP G6062EA Laptop with SEVERAL diffent driver problems such as ethernet and LAN adapter. unfortunatly i am unable to find the correct driver on my main computer and i cant connect the laptop to the internet because of the drivers not being installed. i looked for a resinstalation disk but they COST £33 so thats a no no. any other ideas?You want to DLoad and re-install the chipset drivers for the appropiate Model and OS...what do you mean by DLoad?DLoad = download.

You use your working computer to download the files from here:

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3689147&lc=en&cc=uk&dlc=en&lang=en&cc=uk

Select your operating system and get your drivers. Make sure you select save and not run when you download them. Save all of the files to a flash drive or CD and transfer them to the laptop for installation. Also an error OPENS up at the begining saying "cant open KERNEL mode driver" what is this and how can i fix it ?bumpit also says somin about ACPI $0100 (the $ is a letter i cannot remember)

I've been trying to CONNECT my windows live hotmail to my cell phone, so I can check my emails. It WORKED with yahoo, but now I get my yahoo EMAIL forwarded to hotmail. I'm also using firefox. I keep getting "cannot connect, try again later".Have you TRIED DIRECTING here? http://explore.live.com/windows-live-mobile

hi guys i have been having troubles with my 19 in one card reader that is in my computer it does not recodnise any cards being inserted.... i am running windows 7 x64 os i have heard windows 7 has ALOT of these problems... a solution however is UNCERTAIN unless if any of you can help =DDell support for your 19 in 1 card reader is TEAC Driver CA 200 Enhanced 19-1 Card Reader and is only under XP system. Look under CD/DVD and expand. Did it work before probably on XP or Vista?
http://support.dell.com/support/downloads/driverslist.aspx?os=WW1&catid=-1&dateid=-1&impid=-1&osl=EN&typeid=-1&formatid=-1&servicetag=&SystemID=XPS_710&hidos=WXPX&hidlang=en&TabIndex=&scanSupported=True&scanConsent=FalseProbably no 64bit Driver...Did you upgrade this to Windows 7, or did it come that way? If it came with Win7 x64 or Vista x64, the right driver would have been installed. There should be no "special" driver for the card reader - it is built into Win 7. If it is a desktop (you don't say), you can also replace the reader in under 5 MINUTES or pick up one for under $10 online that plugs into a USB port.

Quote from: steven32collins on April 27, 2011, 10:37:48 PM

hi guys i have been having troubles with my 19 in one card reader that is in my computer it does not recodnise any cards being inserted.... i am running windows 7 x64 os i have heard windows 7 has alot of these problems... a solution however is uncertain unless if any of you can help =D

Greetings, everyone.

I have an HP laptop (pavilion dv7-1245dx) with a copy of Windows Vista installed, and the hard drive recently died (Windows won't even boot up, and a hard drive diagnostic kept failing - I was able to retrieve most of my files using Knoppix as a bootable OS though). I had never gotten around to burning my recovery discs for the computer, so I ordered new ones from HP. When I installed the new hard drive and popped in the operating system recovery disc, it gave me the following error message:

"This PC is not supported by the System Recovery Discs. You will not be able to continue to recover this system with these discs."

Error code: 0100-30FC-3602-3603

The original hard drive was a Hitachi, 320 GB SATA
The new hard drive is a WD 500 GB SATA

If anyone knows why this error occurred or how I can fix it, any assistance that anyone can give would be lovely. :]

Thank you for your time,
C It seems the computers that HP is now shipping have a recovery partition that must be used to recover the system, even when using the recovery discs.
You need to contact HP for further information. They might say you have to have the exact same hard drive. Or the drive may need to be pre initialized by Vista before it can be used.
Otherwise,installing Vista on a new PC from ground zero is a hassle. Unless you have the actual materials the factory used.
You need the specific drivers plus all updates that have been issued.

All users should make a recommended backup right after the purchase of any new PC that does not INCLUDES a full install disc(s).

If you do it yourself, allow at least eight hours of your ATTENTION. Without the factory loader, it is a slow process.The factory does it with an image of a pee-installed Vista for that model. But you will have to go through the process of installing all the drivers.

(BTW, this applies to most new computers being sold now. The user has to make an image or other type of backup. And the failure rate of OEM hard drives seems to be higher than expected.)
That is... tremendously discouraging.

I called HP, and ESSENTIALLY I was told that there was nothing they could do, but if I wanted to spend a couple hundred dollars I could get the laptop in-warranty and they would fix it for me. Unfortunately, I do not have a few hundred dollars to spare, nor do I feel particularly fond of HP enough after this to hand over my money to them.

Is it possible to boot into the system with a live cd (like Knoppix - but preferably not Knoppix, as the computer doesn't seem to like it much), and then clone the hard drive in its entirety, put it on the new hard drive, and then use the recovery discs to start from scratch and install Vista?

Thank you for your response - I had no idea this kind of practice was common now.I hate this. I have a reply to you and Firefox lost it.

Short answer. Paying $200 to fix a PC that should last five years is a crime. Don't entourage them.

You have the legal right to fix this anyway you can, short of breaking into the HP factory and stealing a replacement.

Many here will object to this. What I am saying here is that you bought the PC and thou are entitled to repair it any way you can. Nothing in the EULA prevents you from doing that.

Do you understand d what I am saying? Do have nave to PM you and spell it out. Some here will object if I tell you in detail how to put ,legally put, Vista back onto a laptop with no backup and recover possible.

Hint: Find a friend that has the same model, or one of the same series. Maybe only screen size and CPU speed vary
Need I say more?

Let me know if you need the rest of the story...
I wanted to use the method you suggested as a last resort - thank you so much for OFFERING it. However, I decided to try to clone the drive first, and this is the sequence of events that worked for me:

- Cloned the old hard drive using Clonezilla (the LiveCD didn't work for some reason, so I used a USB stick instead)
- Put the image file on the new hard drive using Clonezilla
- Windows would not load - not even a little. The main partition was not mountable, even using PuppyLinux
- I put in the recovery discs that I received from HP, but it still said it wouldn't work with the hard drive
- Restarted the computer, hit escape and got to a menu of options
- Chose "recovery" from amongst the options, which included things like booting options, BIOS, etc.
- Followed the screens, and it used the recovery partition (which -WAS- mountable, even though the other partition that was C: was not)
- Reinstalled Vista flawlessly from the recovery partition

Hopefully this helps anyone else with the same problem, provided that their recovery partition is intact like mine was.

Thank you for your posts and assistance! This seems to indicate that the recovery discs you ordered from HP were the wrong ones.That's what I thought too - but I double checked the ordering information, and it's the one for my model. The one interesting thing, though? When I go on the HP website and enter in the model of my computer (Dv7-1245dx, as it says on the bottom of the laptop), it will bring up Dv7-1245dx. However, if I put in the product number on the bottom of the laptop, it brings me to a slightly different system instead of Dv7-1245dx.

Even more interesting? I am having some trouble connecting to the Internet wirelessly on the laptop. I went to HP and looked up the page for both dv7-1245dx, as well as the page for my precise product number, in order to REINSTALL the drivers to see if it would help. However, the drivers listed on the HP site for this product are for a wireless device that is not in my laptop. Weird. Still haven't found the right drivers yet. Perhaps this in and of itself is the problem that I - as well as a number of other people - have faced with HP systems and the recovery discs. Even if we order it to go with our product number/model it could still be the wrong one. o-oDon't sweat it. You can easily recover. You can use ANY FULL VISTA DISC FROM ANY PC TO INSTALL FROM. It is amazing how many people don't know this. The only limit is to make sure you use the appropriate x32 or x64 version. Use ANY Vista disk you can get. During install, DO NOT ENTER A CODE, and select "will activate later". Also, select the version of Vista you had installed, i.e. Home Premium and REMEMBER TO FORMAT THAT NEW DRIVE! Install VISTA - you may have to download a lot of drivers from the HP site - and it will prompt you to activate. When it does, use you existing COA (Certificate of Authenticity) from the label on your laptop. It may prompt you to call MS, but they will only ask for the code that comes up on your screen. It is usually an "interactive menu" voice now. Good luck!!!

Quote from: cassiearmand on April 19, 2011, 07:22:03 PM

Greetings, everyone.

I have an HP laptop (pavilion dv7-1245dx) with a copy of Windows Vista installed, and the hard drive recently died (Windows won't even boot up, and a hard drive diagnostic kept failing - I was able to retrieve most of my files using Knoppix as a bootable OS though). I had never gotten around to burning my recovery discs for the computer, so I ordered new ones from HP. When I installed the new hard drive and popped in the operating system recovery disc, it gave me the following error message:

"This PC is not supported by the System Recovery Discs. You will not be able to continue to recover this system with these discs."

Error code: 0100-30FC-3602-3603

The original hard drive was a Hitachi, 320 GB SATA
The new hard drive is a WD 500 GB SATA

If anyone knows why this error occurred or how I can fix it, any assistance that anyone can give would be lovely. :]

Thank you for your time,
C

Right i have two LAPTOPS both toshiba and both running windows vista proffesional. One LAPTOP the startup repair PROGRAM is corrupt along with some start up files (which need startup repair so they can be fixed) is it possible to copy the program from one computer to the other??Don't understand the question. Startup repair is run from the OS disc.On windows vista and 7 there is a program instaled called startup repair i didnt have to use any disks for it...Never noticed it - sorry. Just boot to your W7 DVD and run startup repair then.Build a Vista Repair CD...i dont have a startup repair disk and i cant make one ether....Read the ARTICLE...You can use any INSTALL aka OS disk to do the same thing as the "Repair Disk". Just make sure to select "Repair" once it is launched.

Quote from: steven32collins on April 27, 2011, 08:46:48 AM

i dont have a startup repair disk and i cant make one ether....

Ok so I have had this COMPUTER for about 2 years. Just recently i picked up a new game (FFXIV) and it requires me to install Windows Vista SP2. So i go to update my windows and there is about 20 updates. I try to update and nothing happens after i restart now every time i log in i get a box telling me to activate windows now and the copy I'm using is not genuine. Tried updating and tried activating and no go. Anybody able to point me in the right direction to find out how to fix it?

Windows Veriso-Vista Home Premium
Service PACK 1
32 Bit Operating system
Processor-AMD Phenom II X2 Processor 555 Black 3.2Ghz
Ram-8.00GB
Computer make model- Huh?
HD-500GB Western Digital
Soundcard-SoundBlaster audiology
Video card- 250GTX
SPYware/Antivirus-Avast Antivirus
Real Windows CD-Yeah i got it and the keynumber thinger
Quote

Real Windows CD-Yeah i got it and the keynumber thinger

Or borrow a proper Microsoft Vista DVD(not Dell, HP, etc).
A proper Vista DVD contains all Vista versions.
The PRODUCT Key determines which Vista version gets installed.

Help me my acer computer keep CRASHING on me give me some stupid sound then looping again with continuing long sound then computer freezes then force reboot it self...


i dont know why i had this machine for a yr now it started to ACT up i SENT my computer to be repair at acer they repair it PROBLEM is the thing still there


Can ANYONE help meWhat sound is it making?

What was it sent in to repair previously?

well today i decided to upgrade to INTERNET explorer 9 so instead of downloading from ms website i ran windows UPDATE but windows update also recemended that i install some security updates and a driver updates along with ie 9 and when it was done it ask me to ask me to save my work and reboot but after restarting i got an error sating the bcd or boot config data is missing some information so i booted in to xp which i also have installed and ran easy bcd but easy bcd cant find the bcd file and explorer says that the c:\windows dir on my win 7 drive is unreadable but it still shows a couple gigs of stuff in the propreties diolog.
is windows 7 saveable or is it gone forever and has to be reinstalled http://support.microsoft.com/kb/2004518i tried using the diskpart but when accessing the windows folder it tells me that the drive is not ready You should easily be able to do a System Restore - unless you specifically turned it off. The "System Restore" point saves your Windows state (including the entire registry). Just click the "Start" button and type "system restore", it will pop up, hit "Enter" and restore to the point it automatically made before it installed Internet Explorer 9. Your PC will take a while, and then reboot. Make sure everything is working right for a day or so, then download the installer from the Microsoft website.

Quote from: kevpple on April 27, 2011, 12:30:38 AM

well today i decided to upgrade to internet explorer 9 so instead of downloading from ms website i ran windows update but windows update also recemended that i install some security updates and a driver updates along with ie 9 and when it was done it ask me to ask me to save my work and reboot but after restarting i got an error sating the bcd or boot config data is missing some information so i booted in to xp which i also have installed and ran easy bcd but easy bcd cant find the bcd file and explorer says that the c:\windows dir on my win 7 drive is unreadable but it still shows a couple gigs of stuff in the propreties diolog.
is windows 7 saveable or is it gone forever and has to be reinstalled

windows update also recemended that i install some security updates and a driver updates

NEVER download drivers from Windows Update. Drivers should only be obtained from the OEM websites - and then only if there is a specific need to do so.

You should easily be able to do a System Restore - unless you specifically turned it off. The "System Restore" point saves your Windows state (including the entire registry). Just click the "Start" button and type "system restore", it will pop up, hit "Enter" and restore to the point it automatically made before it installed Internet Explorer 9. Your PC will take a while, and then reboot. Make sure everything is working right for a day or so, then download the installer from the Microsoft website.

system restore i will do, but don't u think that he should boot into safe mode to do, because i think he cannot boot into windows right? so if he just press F8 at boot then get into safe mode to do that, i think its much easier to do that in this instance if he does not have a recovery disk.

Quote from: patio on APRIL 29, 2011, 07:46:49 AM

I'd like to see some documentation for this off the wall claim...

The fact that he doesn't seem to realise that viruses are written in programming or scripting languages, (C, C++, Visual Basic, Java, whatever) makes everything he has written look profoundly ridiculous. Well, it did anyway.

"Viruses written in English" [chuckle]

I'll just teach my computer not to accept questionable gifts from foreigners.

The fact that he doesn't seem to realise that viruses are written in programming or scripting languages, (C, C++, Visual Basic, Java, whatever) makes everything he has written look profoundly ridiculous. Well, it did anyway.

"Viruses written in English" [chuckle]

I have a relatively new PC (bought in Oct., 2010) with lots of CAPABILITY, running Windows 7 Pro 64 Bit.

Virtually every time I shut down for the evening I get the message (DO NOT UNPLUG OR SWITCH OFF COMPUTER. INSTALLING WINDOWS UPDATES. INSTALLING UPDATE 1 OF 1) or words to that effect. The the update is installed and the PC SHUTS off.

Do you other Windows 7 Pro users also see updates this often? Just wondering.

ArtFunny, the guy sitting next to me has the EXACT same problem on the Pro version. I have Home Premium and have not seen this issue (just SAYING, but not saying it's limited to Pro). Said he's been having it for a few weeks now.

Trying going to the Windows Update site and seeing what updates it thinks you need to install.Trying going to the Windows Update site and seeing what updates it thinks you need to install.
[/quote]

This is true but what u can also do is, just change your windows updates settings in control panel and set them however u want them. Or you shut down by choosing a normal shut down: ctrl+alt+del and choose (shut down) from the drop down list when u shut down.

i was getting this message too by the way
enjoy Quote from: charezTech on April 29, 2011, 05:19:29 AM

This is true but what u can also do is, just change your windows updates settings in control panel and set them however u want them. Or you shut down by choosing a normal shut down: ctrl+alt+del and choose (shut down) from the drop down list when u shut down.

give me the site to DOWNLOAD FREE full SOFTWARE Why?
What do you mean by "full software"? Software to do what?
http://www.filehippo.com/

http://www.snapfiles.com/You can download all software from the respective MANUFACTURE of SAID software.

Is it possible to use a command within a BATCH file to stop a program from running? I have batch files set up to start groups of PROGRAMS, but would LIKE to stop several programs from running before the new ones are started.

Thanks in advance!
Doc
I would use taskkill /f /IM program_to_stop.exe and replace the program_to_stop.exe with the name of the program you want to KILL.

Here is more info to share with you on taskkill : http://technet.microsoft.com/en-us/library/bb491009.aspx

I use Vista HP 32 bit with 3 gigs of ram and every time i turn around i ve got huge lag; and get i.e. not responding; Convert X not responding ; Yahoo Instant messenger not responding and can t connect to yahoo vitual sever and the scroll ing up/down has slowed to a crawl . . .

How do i take a crack at solving this annoying lag . . . thanks . .What is new or different since the last time everything worked properly (ie, new hw, new sw, virus, error, etc)?

Have you run full system scans with BOTH your ANTIVIRUS app AND with MalwareBytes? If not, please do so.Added Procexp / UltraFile search and EZ Zip . . . I do use Malwarebytes / superantispyware and Avira and they nothing i can post logs here might be missing ! ?

I do wonder if i have to MUCH running or to much on msconfig.ex and who knows what ELSE - later . . Open msconfig and on the General tab choose "selective startup" (uncheck all three items) and reboot. Does the problem STILL occur? If not, start adding items back to msconfig one or two at a time, rebooting after each change, until the problem reappears and you'll have identified the offending process. This is clearly a time consuming process, but it is the best way to determine if some process loading with the system is the cause of your problem.Ok and yepp v v v time consuming . . .All good things are worth waiting for...

Or if you buy a new machine today i guess that would be quicker...Only if good things come but they NEVER ever do . . .Quote from: Verylost on May 02, 2011, 08:33:07 AM

Only if good things come but they never ever do . . .

I get error message that say. (MVP Baseball 2005 requires DirectX 9 and hardware graphics acceleration. I have tried to install DirectX, but not ABLE to do so.What is your graphics card? If graphics card too old and cannot handle DirectX9, DirectX9 would not be installing for you.

But if graphics card can handle directX9, then something wierd is happening with your pc that I don't know. And uh... your POLL exaggerating your need for help when we already know and are here to help you as much as possible once you provide more info Thanks for your reply. I have a HP tx1020us touch screen. My graphic card is ATI Radeon HD 3200. I am running Windows 7 64 bit. I also have service PACK 1. My E mail address [emailprotected] Once again thank you.


e-maill addy removed tp prevent SPAM.

I have recently downloaded several updates via automatic update s but but windows tells me that it cannot configure these updates , which in no big drama but the pc start time is now ten or more minutes WHILST it tries to configure them.how can i resolve this please. os windows 7/ 8gb ram/499 gb
hard drive.machine 2MONTHS OLD. thanks...... terryQuote

...os windows 7/ 8gb ram/499 gb hard drive. Machine 2months old...

Hello folks:
I am trying to copy a folder to another disk -- on Windows 7.
The folder has subfolders and files, and this way there are many hierarchical subfolders. So the files down at the bottommost subfolders have really long path-names from the root folder. That is: the path-name, e.g., folder\sub-folder\sub-sub-folder\.....\file is quite long.

Now, the standard drag and drop (or copy and paste) does not work satisfactorily. It complains that the path-names are too long. I would rather not move the affected folders and files higher up in the hierarchy to shorten the path-names because logically they belong to where they are now.

So, the question is if someone really knows how to copy such hierarchically deep folders. I am not sure but someone told me that the *Copy/Paste* cannot handle path-names longer than 164 characters. My file path-names are much longer than 164 characters.

Also, I tried *Robocopy* (available from Microsoft tech. site) which supposedly copies files with long path-names. The problem I ran into here was that the *number* of folders and files in the destination drive is *not* the same (after copying) as that at source. So, I really have no faith that *EVERY* folder and file has been copied by *Robocopy*.

If someone has some tips for me I would greatly appreciate that.
THANKS very much.
nhmxxx

In Windows 7 and Vista one can synchronize two folders. Have you looked in this as a possible solution?
This may provide some helpful information.
http://windows.microsoft.com/en-US/windows-vista/Sync-Center-frequently-asked-questions
Thanks Geek for your speedy reply; much appreciated.
So I have used *iomega* external drive and it had features to do a backup on the fly or at scheduled times.
This worked for folders and files there were not hierarchically deep (i.e., long paths). May times, I had to shorten file or folder names so that it would do the backup of these. Very frustrating ....

So, what I need is a tool that would copy my source folders and files, no matter how long the path names are, to the destination drive.
Now, *Robocopy* (http://www.sqlmag.com/article/sql-server/tool-tip-the-awesomeness-of-robocopy) I believe does that but the result shows that the number of folders and files in the source and destination are *not* the same after doing the Robocopy. Thus, my confidence is rather low that everything has been copies to the destination drive.

Any more ideas?
cheers and thanks for now!!!
nhmxxx No solution yet.
FIRST identify the problem.

From IBM. May apple to Windows also.

Folder hierarchy depth and path length limitations
http://publib.boulder.ibm.com/infocenter/cmgmt/v8r4m0/index.jsp?topic=/com.ibm.installingcmqkr.doc/qkrcf036.htmThanks!!!!! will look into this .... and will appreciate it if you come across something that you think might be a solution.
Cheers!!!More stuff.
http://download.cnet.com/Path-Copy/3000-2072_4-10036463.html

There is a solution to this, but it ,is beyond my abilities.
You need an stand alone application tat does not depend on Windows Explorer.
Either a convoluted SCRIPT or MAYBE a C++ program.
The issue is Windows Explorer.Any Application that call into the Windows Explorer stuff will fail on extreme long path/file names.

The path, I thin k, can be 255 chars, and the file name can be 67 chars. Not sure where I saw that. Depth beyond 4 is an issue.

Yet apparently the system can actually do very long paths. Duh?

hi GUYS would i be able to install windows 7 on a REALLY OLD laptop?

the laptop is a hp compaq nx9105http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspxWith those specs i wouldn't waste my time.

Can ANYONE TELL me how to fix Error %APPDATA% in vista home BASIC it will not let me install any sotware? OjasWhat kind of softwares are you trying to install? Are they Microsoft or Non-Microsoft ? Is that the complete path or error? A sample error would be like Error 1606: Could Not Access Network Location -> http://support.microsoft.com/kb/886549Quote from: jason2074 on May 04, 2011, 01:13:16 AM

What kind of softwares are you trying to install? Are they Microsoft or Non-Microsoft ? Is that the complete path or error? A sample error would be like Error 1606: Could Not Access Network Location -> http://support.microsoft.com/kb/886549

can i unfreeze my asus Eee pc LAPTOP without losing the hours of work i just did.didnt get a chance to save it before i FROZE up.
can i tap into it from another computer and retrieve my work before REBOOTING MINE?
there is no cursor movement...someone pleeaase help meHave you tried rebooting your computer? I am sure there are autosave functions for microsoft programs such as excel and so on. In fact, most softwares come with autosave features. So you should be able to retrieve your data EVEN if your computer freeze.

every time i WATCH a NETFLIX video or youtube an so on,the video is fine for awhile then it gets CHOPPY an slows down an GOS back to being ok an repetes itself,how can i fix this?
Thanks.Normally this is due to your web connection itself....
Gp to speedtest and run a test on your connection.

so i got game(revolution under siege) and it needs directX9 to run. Installion worked just fine. I have tried to SIMPLY install directx9 to computer but it gives error message: An infernal system error OCCURED. Please refer to DXError.log and DirectX.log in your WINDOWS folder to determine problem. I treid to use windows search FEATURE. I found DirectX.log but not DXerrro.log. Here is DirectX.log:http://pastebin.com/kTa4FtHf
As you may guess already im using windows vista. And service pack 1. Ask what else you need to know. If you have DX10 then games that require 9 will work with 10 because it is a newer version...Quote from: UNSCSpartan3 on April 22, 2011, 06:34:04 PM

If you have DX10 then games that require 9 will work with 10 because it is a newer version...

i have dx11 and have 8 games that require 9 but i only have 11.

as i told previously isntaller gives me an error(i have tried that one too)

I have tried to simply install directx9 to computer but it gives error message: An infernal system error occured.

How do you uninstall a program if Windows Uninstaller does not uninstall the program?What SOFTWARE are you trying to uninstall and does it produce any error?
You COULD TRY using these -> http://www.revouninstaller.com/Assuming it NEEDS to be uninstalled, reinstall and then try again. It may, however, be a program that does not install in the registry. What is the program?

I looked and this may have been covered before but I did not SEE it.

When I let my computer sit for several minutes the screensaver will come on and then after another few minutes the computer goes into sleep, When I move the mouse or hit a button to bring it awake, it goes to a black screen or background art and the only way to fix it is reset the computer. I have also tried bringing it awake with the power button but it is a 50/50 chance of working or getting the above mentioned screens.

Any thoughts??The first thing is to disable or change screensaver DISPLAYED and also close other/all programs running or open then CHECK sleep mode. Also check your power options SETTINGS. If this is a desktop, there is no reason whatsoever to use any power saving features.