Explore topic-wise InterviewSolutions in .

I'm using Vista Home Prem. with A toshiba Satellite P-205D S7802

When I try to log onto my on line backing I connect to the web site but when i try to GET into my banking I get a 522 error. It only happens on my SPECIFIC bank site. I can do PURCHASES on line on secure web sites, etc,. w/o any problems... I even set up a MSN banking site w/o any problem.

I've worn out the keyboard corresponding with the bank. they can't figure it out EITHER...

any help would be appreciated. On the same matter, when I boot up I get my icon with a 'locked'
message... could this be the problem..?? if I switch users I still can't get into my bank...

I have to use my XP Laptop to do my banking... Thanks!
Quote from: OldGrayGuy on July 23, 2009, 05:24:44 PM

When I try to log onto my on line backing I connect to the web site but when i try to get into my banking I get a 522 error.

Please help.

I have 2 laptops working (??) via a wireless connection on a Belkin router on Virgin Broadband. On Monday evening I spent 3 hours with the Virgin help line in India as I had connection problems.
Laptop 1 (HP Compaq) could not get an internet connection, while Laptop 2 (Acer) could. So to be on the safe side I reset both the router and the modem.
Then neither laptop could get an internet connection and both seemed to have lost the identification of the network which is called simply Home and my Wireless Router is called Colin.
I then reset both the router and the modem again. With no success.
I then went and put an Ethernet cable into Laptop 2 through to the Modem and still could not get an internet connection. From this I believed that the problem was then either the internet line itself (perhaps having dropped in the area) or the modem.
So I rang Virgin. They had me perform various tests and then they advised that both the modem and the line were working perfectly (the Wireless router was not theirs so they were not interested in performing any tests for this). Their first suggestion was that the NIC driver was corrupted and they got me to download a replacement driver for Laptop 1 and to see whether that WOULD help. It didn’t. At this stage we had a 5 minute period (literally) where Laptop 2 worked wirelessly and then went off so I rang Virgin again.
They then got me to check the IP address which was done and it was now found to start with a 169. They then told me that the Laptop had a fault has it reverts to a 169 number to stop it getting access to the internet to protect itself.
They then asked me to perform a number of tasks to correct the IP address. One was simply IPCONFIG/RENEW which did not WORK. The second was through Vista when you double click on the red cross that goes from the network to the internet on the picturegram in the Network and Sharing Centre you get the option of repairing, and reinstating the IP address. The repair did not work as it gave up part way through.
Virgin India then got me to perform all the tasks again on Laptop 1, and it was found that this too had a 169 IP address. Again NOTHING worked.
Yesterday I brought in Laptop 2 into work to see whether it would work on a wireless connection. It didn’t. I did not want to connect it via a cable to our system for fear of possibly endangering our system. I then rang a colleague for help and it was suggested that I download Winsockfix, which I did and installed it on Laptop 2. It still had an IP address of 169 and still could not get onto the Internet.
Last evening I borrowed a laptop (that we had earlier given away, but up to 3 months ago had been working on my home system). I tried to get wireless internet access and was denied. I checked the IP address and it started with 285. I reset the router and Modem. Then hooked this laptop (Toshiba - let’s call it Laptop 3) up to a cable direct to the modem and no Internet connection. I checked the IP address and it now had a 169 IP address……………..
I have come to the conclusion, rightly or WRONGLY that the Wireless Router is damaged in some way. That when I try to access the Internet via the Router it then changes the IP address on the laptops to stop then accessing for protection.
But to be honest I haven’t a clue. All I know for sure is that everything was working perfectly before Monday. Is the system infected? Could a bug be causing all of this?
Virgin TELL me that the line and the modem are working fine and there is no need for them to get an engineer to visit.
Could it be Eset which is my security system? could the fire wall be stopping access and then changing the IP address. If so why would that be? The Eset on Laptops 1 and 2 was up to date. But the Eset on laptop 3 was red so had not been updated for a while. Yet I was still blocked from getting onto the internet.
My thought is that –
1.I probably need to buy a new Wireless Router (as I don’t know whether the existing one is what’s causing the problem)
2.Even with a new Router the laptops will still not work as the fact that Laptop not working in the office has proved.
How can I get the laptops to have a proper IP address?
They seem to be clean from Viruses / spyware etc?
ANY and I mean ANY help that you can provide would be very much appreciated.
Best regards
Do you have the router set up for DHCP?
Do you have the laptop set up to retrieve the IP address automatically?

If that provides no satisfaction you can try assigning the IP address automatically. If you need assistance with that portion just let me know.

This is primarily caused by the computer not seeing the DNS. It is probably not a virus, but you should always use a good antivirus and malware scanner - just to verify that the computer is healthyI had the same exact problem. All started Monday night just like yours. I found out that the problem is related to the ESET smart security. Must be a recent update. Just disable the personal firewall on ESET and repair the broken connection between your network and internet by letting Windows reset the IP under the Network and Sharing Center of the Control Panel. I had two computers with this problem one wired desktop to my Belkin wireless router and a wireless laptop and both can access Internet now. On the down side I don't a firewall for now.Many Thanks. I uninstalled Eset and installed a Free AVG instead. within minutes the laptop was connected to the Internet. Sucess. I just hope that when I get home this evening and try it out on the home network that it proves equally sucessful.

omg!
Khato, you kick-*censored*!
I was going mental here trying to fix my laptop (did so many scans and started backing up files so that I would wipe everything out and start all over again)
But this worked!!! bloody ESET! So happy right now... thanks soooooooooooooooooooooo much.

(and to think I accidentally stumbled on this post) wow.Hi there what is the ESET? I am having problems with my laptop having a 169 IP address. My desktop is fine. buster you need to start your own Topic so it can recieve the proper attention...
Post as many details as possible and Welcome Aboard !

Vista Sp2 Home prem 64 Bit.

When I open an MP 3 "it" wants to open as a Quick Time.
I TRIED "open with" and CHOSE Windows Media Player *. But the association is still stuck in Quick time.

* Rt clicked on the file, chose open with, Choose Default Player, Browse, whcih takes me to All Programs (86), I then navigate to WMP & chose that program.

Any suggestions?Quote

& chose that program

thx - fixed it under:
default programs options

hi all, ive researched and researched this but have grown frustrated. I recently purchased a new HP HDX Laptop with Vista Home Premium installed. I havent really used the laptop because I had been waiting for the Vista ULTIMATE Upgrade disc to arrive that I ordered. It did, and I ran the upgrade but now I'm left with a code 10 error on my Realtek Network Card. I tried uninstalling and reinstalling and i get the same result. It says it is up to date but just wont start. I'm at a loss as to what to do from here. In device manager i also have several "other" devices that have exclamations by them and dont know what they are. Anyone have an answer or solution? Help would be much appreciated.

rhoadsSounds like it's missing the laptop's chipset drivers...
Re-install them from the Driver CD that shipped with the machine...yea i have tried that, when i try to reinstall from the cd it CAME with it says i am up to date.........not sure if the upgrade i did to ultimate is the reason or not?Quote

i also have several "other" devices that have exclamations by them and dont know what they are

I recently purchased a new HP

OK, Newbie to this board as I was searching the net for some help. I'm not computer literate although I somehow was able to build my own machine from scratch about 6 years ago.

I bought a Compaq Presario F700 (F730US) in Dec 2007 for my TEENAGE daughter and have been pretty handsoff as she seems to know more than me (not saying much) which is probably my first mistake.

The problem is it doesn't recognize any wireless networks at all, as though it doesn't have wireless capabilities at all as of about 2 weeks ago. It worked fine prior. I know our home network is fine as my work laptop connects to it automatically.

I have UPDATED Windows Vista with all the available updates since she had never done this. It still is not recognizing anything wireless. I currently have it hard wired to our wireless router to get here.

I believe this problem started shortly after she downloaded a program called "Limewire" which her cousin has and "has never had a problem with it". I NOTICE this was installed on 7/3/09. Interestingly a couple of other prgrams appear to have been installed the same day. They are:

Zwangi1.0build115
Music Oasis
My.Freeze.com Toolbar
RelevantKnowledge
Winferno Registry Power Cleaner

I do not believe she purposely downloaded these outside of limewire. Just seems too coincidental that our problems seemed to start at the same time. I was going to uninstall all of the above and just would like someone more knowledgable to offer their advice as I try to fix this.

Any help is appreciated.












Try going into control panel then click on classic view on the left. Go into device manager and find network adapters. Open network adapters and you should see your wireless adapter there. Right click on the wireless adapter and uninstall it. Then do a full restart to re-install it automatically. Then re-try connecting to the network
Let me know how you get on Mulreay - thanks for the response. I'm looking at Network adapters and it is only showing NVIDIA nForce 10/100 Mpbs Ethernet (which is what I'm hard wired thru now). It does not show any wireless adapters although it is built into the machine.

I have uninstalled all the software noted above in the meantime. Installed Avast Anti-virus, and Ad-Aware anti-spyware, run scans and deleted the few items each came up with upon scanning.

There is a switch for wireless on the front of this laptop, but the light stays on regardless of switch position. I get the feeling now that the wireless adpater is completely on the fritz.

What would be the best way to remedy? Any thoughts on this are appreciated. Ok let's try this. Click on Start the MS sphere in the bottom left 'type in a SEARCH for network and sharing centre you should not need to type the full thing before it shows up, click on it. On this page look in the left margin for manage NETWORK CONNECTIONS..... NOT wireless connections right click on the wireless adapter and see if you can enable it from there.
Have a go with that and let me know how your getting on

i dont think killer box is the best THING to try i used it and it CRASHED ma laptop It's KillBox and what were you trying to remove when it crashed your machine ? ?yeah that's almost as stupid as that darn format.com. why, I ran that tool on my C: drive, and bam! Everything was gone!some PICS i didnot need on ma PC some sofwear sutuff i dident need or that i had the upgrad of

Hey All,

This is the issue. I am running Vista Home Premium 64 bit on a ECS BLACK SERIES GF8200A (V1.0) with a AMD X2 at 2.9ghz and 4gb of ram. It seems when I upgrade to Vista SP2, my Lexmark and Ethernet devices loose their drivers and stop working. I go into Device Manager and they have exclamation points by them and I try updating the drivers but it fails. Any idea on this? It only happens when I upgrade to SP2.Have you tried downloading current drivers from the manufacturers?Yes but they are the same drivers as what I have on their previously.Is the machine still under warranty?I built it myself and I am SURE the MOTHERBOARD is under warranty, but ECS support is the worst.If the drivers are current, and the issue still happens then it SOUNDS LIKE a failure on the motherboard.if it works fine without sp2, i would just remove it. Sometimes microsoft updates screw things up.Quote from: mdoggy39 on July 21, 2009, 07:37:28 AM

if it works fine without sp2, i would just remove it. Sometimes microsoft updates screw things up.

I want to know how to like,double click on contest FORMS,etc.,and have windows auto fill in the address blanks.Cant seem to do it in Vista,old computer worked fine,just too hard to have to manually fill in all those contest forms,etc..Anyone HELP?I also am a computer dummy..plz keep it simple..TYVM>Do you have "AutoComplete" turned on in Internet EXPLORER (if you're USING Internet Explorer)?Some AV software like Norton has cards & log INS. Careful using IE for auto login if other people use your computer and you don't want them to see sensitive details.

hey all, a FRIEND is trying to install a game, age of conan, and it wont work, says it needs vista sp1, but when i TRY and INSTAL sp1 it wont go, keep getting DIFFERENT error codes, checked microsoft, did what they said, and it still wont install, WHATS up with that???
Where did you get SP1 from ? ?Is this a legal copy of Windows?from microsoft, and yes it is legal.Post the error codes...you may have other issues with that system.

My COMPUTER SOMETIMES shuts down and restarts itself, then I get this message:

REALTEK 8101/8168/8169 PCI/PCIe Adapter DRIVER (RTLH86.SYS) has stopped working properly.

and since I'm not very technical and english isn't my first language I have no IDEA what to do.

Re-install your MBoard drivers from the Driver CD that shipped with the machine...
This will not harm anything and probably make the issue go away...

I'd previously downloaded a TRIAL of Undisker but was not satisfied. It isn't listed in the program files and all searches bring up are ISO files that are associated with the utility. I'd just like to wipe all traces of it off my computer. Help please.Try Revo Uninstaller: http://www.revouninstaller.comI was really hoping not to need to intall something new to install something old. Is there some reason Windows can't see undisker?If you don't want to follow the ADVICE given i would predict you will have the same dilemna...
We don't SUGGEST fixes here that don't work...Quote

Is there some reason Windows can't see undisker?

I know someone who bought a COMPUTER that came with VISTA. He did not register it but instead installed Windows XP. He is willing to sell the OEM Vista disk to me for $30.00. My QUESTION is, will the disk work on a new barebones computer that I am buying or, will the disk only work with the computer it was SOLD with. I understand that sometimes OEM software looks for hardware markers and will not install if the computer does not have those markers.Most dealers don't GIVE a "real" windows disc and instead provide a recovery CD /DVD. If that is what this is then it will not work.OEM software works only for a single computer.
Retail software works on computers with the minimum system REQUIRMENTS of the software.

I've had to resort to typing on my iPod so please pardon the typing mistakes.

I have a laptop just over a year old, I unplugged it's battery on accident the other night and now get a blue screen whenever I try to load windows. Itsays there is a problem with the Ntfs.sys file.

I've tried loading the vista repair cd, same blue screen. Tried a real vista cd, same blue screen. Tried xp cd, it loads into the first screen where it loads all the SETTINGS and then blue screen saying error.

I want to format my hard drive, but without being able to get to dos or Any operating SYSTEM I'm not sure how to do this. Thanks in advanceWhen you get the message that says 'missing or corrupt Ntfs.sys file' (I assume) what error code does it give? This could be to do with a recent update.Remove hard drive. Put it back.Tried removing hard drive, still have the problem. I tried to find the error code but it flashes so fast I can't read any of the blue screen. Anything else I can try?As far as software updates go I don't recall updating anything before all this and here haven't been any hardware changes. Quote

I've tried loading the vista repair cd, same blue screen. Tried a real vista cd, same blue screen.

If you have Vista DVD...

http://www.vistax64.com/tutorials/88236-repair-install-vista.html

Hello

I was just wondering why disk clean up in windows vista, says i have 28.8kb in tempory internet files.
But when i ran ccleaner 40mb tempory internet files where removed ?I can't see there being 40mb of temp internet files are you sure your not just reading the total amount of space gained from removing everything?

[attachment deleted by admin]well, here's what mine shows...

the temporary files (not shown) were over 66MB, too. I don't have CCleaner installed on my desktop to compare, but on my laptop, CCleaner finds 6MB of temporary internet files, and disk cleanup finds 1.81MB.




[attachment deleted by admin]I suppose if you never ever clean up then you would get that. It's just the original post stated there was only 28.8kb temp files but then removed 40mb so just looking into the logical.err... he ran the built in disk cleanup, and got 28K. then CCleaner, a different PROGRAM, removed 40MB.

He's curious as to why.

Which REMINDS me... never explained that.

The reason is simply that CCleaner looks in more places... additionally it removes more then just temporary internet files.My bad I have ccleaner as well just thought at first he had made a typo and meant (cleaner). Cheers BC never even spotted that.Quote from: BC_Programmer on July 16, 2009, 08:24:57 PM

The reason is simply that CCleaner looks in more places... additionally it removes more then just temporary internet files.

additionally it removes more then just temporary internet files.

I expect only tempory internet files to be removed, so what else is it removing
If only this is checked why the big difference compared to disk clean up

Easy. Windows disk cleanup only looks at internet explorer. CCleaner looks at firefox.

If you don't use IE, then you'll have very little in the way of temporary internet files according to it; but CCleaner will pick up Firefox temp files.

Which may raise the question: Why do I have so many? I don't use Internet Explorer! Well, It's because I read a lot of eBooks and so forth, in CHM format (which uses the IE engine, and thus stores temporary files).

you can always compare the two lists, and see what CCleaner has more...

The standard win cleanup cleans from all accounts as well. It gives you the option on start up.

Come to think of it, that's a good IDEA. I RECOMMEND SENDING it to a DISTANT RELATIVE.

I have followed posting to utilize DIRUSE to determine what is eating up space on D: drive (VISTA, Dual-Core). It shows huge Recycle Bin files that I cannot see when I click on computer D: drive and which I cannot DELETE. I have tried everything in that post but do not know how to GET rid of these huge files (most are 'catalogs'). This in turn, I believe, is keeping the computer from operating efficiently. The Video card cannot even load completely which might be directly tied to this problem as well.

Unfortunately, when I first started, I had routed the automatic BACK-up to D drive. That has been since turned off. 3 GB of RAM have been installed, but still I have not enough space to do anything which I think might be associated with this screw up in the D drive.

I have turned on "SHOW hidden files" but not sure if that works for D drive. I still cannot see those files that DIRUSE shows me are on that drive.

Can anyone help me?then try whipeing UR computer and then set every thing up but keep a back up disck of all your stuff
Quote from: morton007 on July 17, 2009, 02:31:52 PM

then try whipeing ur computer and then set every thing up but keep a back up disck of all your stuff

I have a system (with Vista on it, I'm one of the few who doesn't loathe Vista) with two internal and one external hard drive, among other things I keep my Itunes stuff on the external drive.

At one stage I was having trouble with FIXING the drive letter in place, it kept on resetting itself, so I went through computer MANAGEMENT and locked it into being drive K.

Yesterday I unplugged the hard drive (accidentally) and this morning, not yesterday, it's reset itself to being drive M. Everything on that drive no longer works..

I've tried going through computer management again and it will let me reset the letter but not to drive K (I'm locked out).. Which is where I want/need it..

I need to get rid of the old settings but I'm not SURE how, does anyone have any ideas?

A.Do you have anything assigned to a K: drive? (I mean, has something else commandeered to letter).

If so, either unplug it (if possible) or change it via disk management.

I'm wracking my brain on this one, since I had the exact same issue with a CD-ROM drive, and I do recall the "fix" was easier done then said...Nothing else has grabbed the letter, it's simply the old settings.

It COMES up on my comp (now, wasn't doing it 10 mins ago) as being an external CD, it's not there's nothing plugged in there..

It's got me lost at the moment.

ArwinGive the drive a Volume label and re-assign it...
You should be using "Safely Remove Hardware'....you risk losing all your data."You should be using "Safely Remove Hardware'....you risk losing all your data."

I know

I was actually trying to reset another USB plug when I grabbed it by mistake.

Arwin.

I'm stumped on trying to remove the read-only attribute on a folder I created on the desktop..
I've gone through the steps to take ownership (as far as I know) with no luck..

Every TIME I right click on the folder and remove the read-only attribute, it always comes back...

I'm trying to change the contents of the folder from a Windows XP computer on the NETWORK, but when I try to change anything it says the disk is write protected and I'm denied access. I assume "write protected" means that the read-only attribute is set and needs to be removed.check off, "allow network users to change my files" on the sharing tab of the PROPERTIES dialog for the folder on the PC the folder resides on.Here's my share tab....I don't see what you mean.


I have tried sharing the folder itself, but I'm still not allowed to change anything in the folder..

The only way I can change the folder contents from another computer is by adding the folder to the PUBLIC folder on the computer it resides on (Vista)Advanced Sharing...Already tried it...

I even ADDED the FULL Controll permissions on the "everyone" group that is under "Advanced Sharing"


I guess I can live with it the way it is, changing stuff while in the PUBLIC folder......I'll have to take a CLOSER look at "Permissions" at a later time..

Hey Guys...Here is the problem I've been having...

Every time I turn my computer on Windows DEFENDER fails to start up and this pops up every time...

Windows Defender
"Application failed to initialize: 0x800106ba. A problem caused this programs service to stop. To start the service, restart your computer or search help and support for how to start service manually"

Anyone have any ideas? Just remove windows defender from system startup (so it doesn't automatically load on startup)... windows defender doesn't really do anything anyway. Should work as advertised, but in my 3 or so years with it, it's found 1 or 2 things anyway.

follow the instructions from the following link: http://www.groovypost.com/howto/microsoft/vista/remove-windows-defender-from-vista-system-startup/But also make sure you replace it with an anti-virus software. Windows Defender, and AV program are two different animals.Quote from: Broni on July 16, 2009, 06:52:04 PM

Windows Defender, and AV program are two different animals.

WD is NOT an AV program. It's more of antispyware, but in any case, I've never seen it catching anything.

superantispyware

unless you meant Superman is perfect?

The last couple of times I've seen it, it's being a symptom of a machine with a Fake AV program on it..

Ok i am trying to set a custom resolution of 1920x1200 on my monitor through nvidia control panal. It tests it and it works FINE. I hit yes to keep and it reverts back to the other resolution? Is this a driver problem? Is there some way i can force it to keep it?you have the latest drivers? yes but i am questioning the driver because when i reboot after installing the driver it wont show anything on the screen once i get to vista login screen. So i uninstall in safe mode and reboot in low res mode and it installs and works after that. My video card is a 9800GTX+.Is there any way to FIX this?Can I just ask MATE. If this is an LCD monitor which I will assume it is why are you trying to change the native resolution. All monitors come set to there best resolution.it is a CRT and it says its max resolution is 1600x1200 which it can display in nvidia control panel but i hit yes and it reverts back... And if i set it to 1600x1200 in display settings it wont show at all?What does it say in the Win 'display settings' as your max res?Quote

it is a CRT and it says its max resolution is 1600x1200

Ok i am trying to set a custom resolution of 1920x1200

Gday all,
Running Windows Vista, SP2 , 2 gig processor, 2 gig RAM. Attached is a Canon MP460 multi printer, scanner.
I am recently Having trouble with an annoying pop up on boot up which has only recently surfaced.
At the completion of boot up, a pop up appears stating, Rundll- Error loading c:\users\henry\cnmss- when I put the cursor on it it states, “..IJ Status-Monitor starter, company canon Inc,file version 0.3.00 created 14/7/09” (14th July 09)
The printer and scanner run perfectly, but this pop up is very annoying although not affecting performance.
I located original file in C drive/Users and sent it to the recycle bin. No change in printer or performance. Re boot and the pop up appears again. Appears every boot up. Did a system restor and no effect.
Driving me nuts. Any advice on getting rid of it PLEASE.
I am just a computer user, so any advice tendered WOULD have to be in simple terms as I am a pre baby boomer and late on the computer scene. Hoping you can help
Woops fogot to add that it is Vista Home Premium.
Cheers
Henell
Must be some startup...

Download HijackThis:
http://www.trendsecure.com/portal/en-US/tools/security_tools/hijackthis/download
by clicking on Download HijackThis Installer
Install, and run it.
Post HijackTHis log.
Do NOT attempt to fix anything!

NOTE. If you're using Vista, right click on HijackThis, and click Run as AdministratorThank you Broni. To the best of my ability, (very limited) I have tried to comply
The following is what came up
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 3:15:19 PM, on 15/07/2009
Platform: Windows Vista SP2 (WinNT 6.00.1906)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Windows\system32\taskeng.exe
C:\Program Files\Windows Defender\MSASCui.exe
C:\Program Files\Thomson\SpeedTouch USB\dragdiag.exe
C:\Windows\System32\igfxtray.exe
C:\Windows\System32\hkcmd.exe
C:\Windows\System32\igfxpers.exe
C:\Program Files\AVG\AVG8\avgtray.exe
C:\Program Files\Motorola\SMSERIAL\sm56hlpr.exe
C:\Windows\ehome\ehtray.exe
C:\Program Files\Windows Media Player\wmpnscfg.exe
C:\Program Files\FinePixViewer\QuickDCF2.exe
C:\Windows\system32\igfxsrvc.exe
C:\Windows\ehome\ehmsas.exe
C:\Program Files\Trend Micro\HijackThis\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.bigpond.com/
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.bigpond.com/
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.bigpond.com/
R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant =
R0 - HKLM\Software\Microsoft\Internet Explorer\Search,CustomizeSearch =
R0 - HKCU\Software\Microsoft\Internet Explorer\Toolbar,LinksFolderName =
O1 - Hosts: ::1 localhost
O2 - BHO: Adobe PDF Reader Link HELPER - {06849E9F-C8D7-4D59-B87D-784B7D6BE0B3} - C:\Program Files\Common Files\Adobe\Acrobat\ActiveX\AcroIEHelper.dll
O2 - BHO: AVG Safe Search - {3CA2F312-6F6E-4B53-A66E-4E65E497C8C0} - C:\Program Files\AVG\AVG8\avgssie.dll
O2 - BHO: Java(tm) Plug-In 2 SSV Helper - {DBC80044-A445-435b-BC74-9C25C1C588A9} - C:\Program Files\Java\jre6\bin\jp2ssv.dll
O4 - HKLM\..\Run: [Windows Defender] %ProgramFiles%\Windows Defender\MSASCui.exe -hide
O4 - HKLM\..\Run: [SpeedTouch USB Diagnostics] "C:\Program Files\Thomson\SpeedTouch USB\Dragdiag.exe" /icon
O4 - HKLM\..\Run: [IgfxTray] C:\Windows\system32\igfxtray.exe
O4 - HKLM\..\Run: [HotKeysCmds] C:\Windows\system32\hkcmd.exe
O4 - HKLM\..\Run: [Persistence] C:\Windows\system32\igfxpers.exe
O4 - HKLM\..\Run: [AVG8_TRAY] C:\PROGRA~1\AVG\AVG8\avgtray.exe
O4 - HKLM\..\Run: [SMSERIAL] C:\Program Files\Motorola\SMSERIAL\sm56hlpr.exe
O4 - HKCU\..\Run: [ehTray.exe] C:\Windows\ehome\ehTray.exe
O4 - HKCU\..\Run: [WMPNSCFG] C:\Program Files\Windows Media Player\WMPNSCFG.exe
O4 - HKUS\S-1-5-19\..\Run: [Sidebar] %ProgramFiles%\Windows Sidebar\Sidebar.exe /detectMem (User 'LOCAL SERVICE')
O4 - HKUS\S-1-5-19\..\Run: [WindowsWelcomeCenter] rundll32.exe oobefldr.dll,ShowWelcomeCenter (User 'LOCAL SERVICE')
O4 - HKUS\S-1-5-20\..\Run: [Sidebar] %ProgramFiles%\Windows Sidebar\Sidebar.exe /detectMem (User 'NETWORK SERVICE')
O4 - Startup: Canon IJ Status Monitor Canon MP460 Printer (Copy 1).lnk = ?
O4 - Global Startup: ExifLauncher2.lnk = C:\Program Files\FinePixViewer\QuickDCF2.exe
O4 - Global Startup: Microsoft Office.lnk = C:\Program Files\Microsoft Office\Office\OSA9.EXE
O13 - Gopher Prefix:
O16 - DPF: {2646205B-878C-11D1-B07C-0000C040BCDB} (NSIEMisc Class) - file:///D:/Speedtouch/HTML/nskey.dll
O16 - DPF: {30528230-99f7-4bb4-88d8-fa1d4f56a2ab} (YInstStarter Class) -
O16 - DPF: {D27CDB6E-AE6D-11CF-96B8-444553540000} (Shockwave Flash Object) - http://fpdownload2.macromedia.com/get/shockwave/cabs/flash/swflash.cab
O18 - Protocol: linkscanner - {F274614C-63F8-47D5-A4D1-FBDDE494F8D1} - C:\Program Files\AVG\AVG8\avgpp.dll
O20 - AppInit_DLLs: avgrsstx.dll
O23 - Service: a-squared Free Service (a2free) - Emsi Software GmbH - C:\Program Files\a-squared Free\a2service.exe
O23 - Service: AVG8 E-mail Scanner (avg8emc) - AVG Technologies CZ, s.r.o. - C:\PROGRA~1\AVG\AVG8\avgemc.exe
O23 - Service: AVG8 WatchDog (avg8wd) - AVG Technologies CZ, s.r.o. - C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe

--
End of file - 4131 bytes

I trust that this is what you want. If notkeep it simple for the
computer dork please. Thank you againRun HJT again, and checkmark:
- O4 - Startup: Canon IJ Status Monitor Canon MP460 Printer (Copy 1).lnk = ?
Click "Fix checked" button.
Restart computer.Thank you so much. As a geriatric newbie I am amazed by your knowledge. I finally figured out how to follow your advice and it worked Thanks again.Woops. Seems I spoke too soon. Did several boot ups and all was serene, no pop up. Switched printer on and booted up and the thing thing had popped up again. I ran HJT again and there it was again, back on the list, after having "fixed" it.
Ticked/checked it again and ran "fix it" again. Came up again. Very persistent thing.
Any further thoughts please? Looking again at that entry, it looks like your printer Status Monitor file is corrupted.
I think, you need to reinstall printer driver.And in the re-install look for "check for auto updates " and de-select it...I ran HJT again and selected and hit the fix option it appears to have worked. Have booted up several times, then next morning, twice, and the thing (ssshh!) hasn't appeared. Thank you both for your advice. Will keep in mind the re -install option, and the auto update turned off. Thanks again for your time.Very well then Quote

Checking: Platform: Windows Vista SP2 (WinNT 6.00.1906)

I have a compaq presario v6000 running VISTA as it came. Yesterday i had some trouble with an windows update and it stopped updating in the middle. i was running a reg cleaner last night went to bed and when i woke up i wasnt ABLE to LOG on. i was able to to to load windows repair but this is what i get start up repair connot repair this computer automatically. problem details

problem signature 01 external/media
problem signature 02 6.0.6000.16386.6.0.6.001.18000
problem signature 03 5
problem signature 04 524296
problem signature 05 NoBootFailure
problem signature 06 BadDriver
problem signature 07 0
problem signature 08 3
problem signature 09 WrpRepair
problem signature 10 10
os version 6.06000.2.0.0256.1
locale ID 1033







What CD DRIVE are you trying this from ? ?
What exactly does it say on this CD ? ?

Any issues prior to this ? ?Quote

i was running a reg cleaner

Hi Everyone,

I am planning on preordering WINDOWS 7 Professional for use on my Samsung NC10 netbook but I have a few questions first:

1: Will the aero GLASS interface work on the Intel GMA 950 graphics?

2: If I do an UPGRADE install will all my Programs, Files and Drivers be preserved?

3: Can I install with a USB drive or from a second hard drive partition?

Thanks in advance,
Cameron Gray

Specs:
Intel Atom N270
1 GB Ram DDR2
GMA 950 GraphicsWhat is installed on the netbook currently ? ?
If it's not Vista you will have to do a clean install which means your apps and data will be gone.
Although no final word from Redmond yet RUMOR has it that there will be a flash drive ver. for installing to netbooks.

Not sure about the graphics question so wait for Calum or another video expert to wander thru here...I doubt a netbook could handle Aero Glass...

Running WIN 7 RC and using Windows Live Mail. I initially was using an old, basic wheel mouse but later bought a Microsoft optical mouse with tilt wheel, the feature that allows HORIZONTAL scrolling. Oddly, horizontal scrolling does not work in Windows Live Mail when the MESSAGE pane is wider than the message and the norizontal scroll bar is displayed at the bottom of the panel.

Horizontal scrolling works fine in other apps. I have the latest drive/software installed for the mouse. I suspect this has nothing to do with my pariticular mouse and there may be no solution unless Microsoft provides a FIX.

Just wondering whether any of you have noticed such VARIATIONS in your horizontal scroll function.

Hello again

A freind of mine is using internet explorer 64 bit, but this is not supported for FLASH player.
How do you CHANGE browsers so she can USE internet explorer 32 bit

Windows vista ultimateStart/All Programs...both are listed...Quote from: patio on November 11, 2009, 08:27:25 AM

START/All Programs...both are listed...

I'd unpin the 64-bit one to avoid confusion.

I am trying to troubleshoot a problem with Internet Explorer 8 in Windows 7. All the errors I am getting RELATE to RASAPI32.DLL which APPEARS to be the Remote Access API.

My question is what is this and how does windows use it in relation to the Internet Explorer.

Does it relate to wireless networks
Can THIRD party firewalls like Nortons 360 cause problems with the API.

Any information will help me troubleshoot my other post.Please read ans see if this applies to you.
http://support.microsoft.com/kb/174579
If you GET a waring message that his is not for your OS, stop.
Otherwise: Be very careful about making changes to the Registry .

Hey guys,

Okay I've searched thoroughly for this but could not find an aswer to this problem I'm having on my laptop.

Config is:

HP Pavilion DV2530EA
2.1 years old system
Vista Home Premium OEM on it, SP2
2 GB RAM

I've had a BSOD twice now within the last month. After the first one, I had to do a complete re-install as system files were damaged. I thought it must've been some virus, but apparently it's not, as I've done a new install and it happened again. This TIME so far it's seems ok after the reboot though.

The funny thing is that the system running extremely well otherwise - there are no other problems, slowdowns, freezes, hangs, nothing like that.

Here's what I was doing just before the BSOD: (on both occasions, the circumstances were EXACTLY the same!)

-I was surfing the net with IE8

-other programs running in the background: utorrent, Total Commander, Notepad

As I say, both times I was doing the same: reading some forum in IE8 with exactly the same apps running in the background and then suddenly bang!

I could not read the bluescreen message, as it moved on to the reboot too quickly. The only things I caught were something like:

...check for updates for you BIOS...
...DUMPING physical memory to disk...

I don't know if that helps.

Here's the message I got after the reboot (unfortunately I don't have the message or the dump from the first BSOD).


Problem signature:

Problem Event Name: BlueScreen
OS Version: 6.0.6002 2.0
Locale ID: 2057

Additional information about the problem:

BCCode: 1000008e
BCP1: c0000005
BCP2: 8c4c5830
BCP3: b9f4ea54
BCP4: 00000000

Files that help describe the problem:

C:\Windows\Minidump\Mini110809-01.dmp
C:\Users\atesz\AppData\Local\Temp\WER-42744-0.sysdata.xml
C:\Users\atesz\AppData\Local\Temp\WER2CBA.tmp.version.txt

I've attached the minidump file zipped if you guys would like to have a look at it.

Please let me know if you need anything else.

Any help would be greatly appreciated, thanks very much.

[Saving space, attachment deleted by admin]Have you tried your surfing with another browser, like Firefox / tried turning off some of the things running in the background?

Alan <>< Go to system properties - advanced - startup &AMP; recovery settings and uncheck "automatically restart". Next time the blue screen will stay up. Post the entire error message here.Ok, will do.

Any other suggestions?Not for now...Quote from: Trident on November 10, 2009, 08:45:30 AM

Ok, will do.

Any other suggestions?

I've had a BSOD twice now within the last month.

Went to open C drive from my computer to check properties and was given this message

RUNTIME ERROR Program: C:\Windows\explorer.exe abnormal program termination
I can not open any drives under my computer with out getting this message.

please help am running vista ultimate trial
Reboot; the computer might CLEAR the problem.

Windows has recently had MAJOR updates for November. Make sure you have all updates

RUN sfc /scannow from the command prompt or from start, run [ sfc /scannow ].

Run your anti VIRUS again

Good luck

hi,
this might be a silly question but i am nothing about computer so please fogive me
I just got a laptop with vista,it came with win7 free upgrade.
but my bf also got a laptop a few month AGO, and he has already ordered win7 upgrade,waiting for it to arrive.

my question is;
can i upgrade to win7 with his cd? or each cd is made just for once(one pc)?
Recently I just received my Windows 7 update. I had bought the stuff home and had to wait about two weeks for the update to come through.
I had some difficulty installing it, until I realized I was using the wrong product key. I had to use the product key that came with the Windows 7 disk. Oh, by the way, it is not now a CD, it is a DVD. So you have to use a DVD drive to boot and install Windows 7.
As far as I can tell, Windows 7 does not ask for the feast disk. So, I don't KNOW how to Windows 7 install DVD would know that it was only an upgrade, not a new install. But, it behaved LIKE a new install.
Nevertheless, I am very sure that Microsoft will not allow you to use the window seven on more than one computer. Just as the visa was intended for just one computer, so likewise the upgrade is intended for just one computer.
Does that answer your question?
Anyway, with both Batista and Windows 7 you can use them for 30 days before the activation grace time expires.
Quote from: Geek-9pm on November 11, 2009, 12:23:56 PM

Just as the visa was intended for just one computer, so likewise the upgrade is intended for just one computer.
Does that answer your question?
Anyway, with both Batista and Windows 7 you can use them for 30 days before the activation grace time expires.

Recently I have been making remarks about Southern fried chicken.

A FRIEND of mine did a rutine SYSTEM restore on my windows vista because he changed a few settings he didn't like and now I can not run any programs other than internet explorer, notebook and just a couple other simple programs. He can't remember what date he used for the system restore either and now it has been a couple of months.

Now when I turn on my computer, it takes 10 min to click on all the "This __________ program is not working". I can't run office, I can't run quicken, I can't run anything really.

What do I do? PLEASE help a lady! Hello Kennedy. A couple of things. First, if it's been a couple of months the restore point is GONE. Second, it sounds like you have other issues. Have you run a full scan with BOTH your anti virus utility AND MalwareBytes? If not, I suggest you do so.yes, I have run both and it came up with nothing serious. PLUS i had antivirus software running ever since I got the computer and before he ran the darn restore, everything was running just fine...It seems to be more of a missing driver (scuse my ignorance if that is not the right verbiage) or missing something that is making it so none of these programs can start for some reason....Well, you can boot to the Vista CD and do a repair, but I don't know that it will help. It will, however, make sure all system files are in place. ok, I will give it a shot. If it doesn't work, what would you suggest?
Come back and let's go from thereThanks so much! Sure. I won't be around much longer tonight but there are plenty of bright folks here willing to help. I'll CHECK back in the morning.

I have an HP Pavilion tx 2000 with Windows Vista 64-bit and 4.00 GB of ram. Processor: AMD Turion (tm) 64 x2 Mobile Technology TL-64 2.19 GHz. My laptop is also a touch screen.

I have been getting BSOD's since July 2009. My laptop will only STAY on for about 5-10 minutes before getting a blue screen. I recently sent my laptop in to get the problem fixed, and they claimed it was, then two days later I got two different TYPES of BSOD's: Bugcode_USB_Error; Driver_Power_State_Failure.

RIGHT now my computer only works FINE in Safe Mode (currently in Safe Mode with Networking). The only thing I have connected to my USB is my printer and I also have a Fingerprint sensor (not external).

Since I had my laptop recently "fixed" I can only find .dmp files from November 8th on. I would appreciate any help you all can offer. I'm a college student and I need to use the FULL capabilities from my laptop and can't do this with my computer constantly shutting off.

Thanks in advance.

[Saving space, attachment deleted by admin]

I recently bought a used Sony PCL-384L laptop. OI am hoping now it isnt stolen.... Opps!! Anyway, after system boots it goes to the windows login screen asking for password. Problem is, I have no clue as to what it is and cant contact seller. I know, it was/is a crazy deal on my end. I took it APART but could not locate a cmos battery, did i not look hard enough? What is the best, cheapest way to make the computer useable? I dont have any previous Vista info nor CDs. I have tried burning a few bootable CDs on a XP MACHINE for help but they wont boot the system from the CD. Lost here......... Help please.You need to wipe it and re-install the OS of your choice as should be done with any used machine...well, I tried that as well. I put my XP pro cd in, which is a CLEAN but old install and the Vista machine says it doesnt reconize any hard dive installed. Machine has like 200 gig hard drive. The XP cd starts setuip and seems to be doing fine then comes to a screen saying it doesnt reconize any hard drive/disc installed.You'll need to DOWNLOAD the sata drivers for your hd.Sorry, but you could you tell me wht sata driversw are and how to delete them. Vista box will boot but only the vista home login page. I am SOMEWHAT literate with 98/xp but not with VISTA. Any help is very much appriciated. Somone said [emailprotected] Boot disk would help if I CAN GET IT TO BOOT FROM cd OR flash drive.

Thanks for you4 words but plz do elborate on them as much as possible or give some link. I was hoping there may be a few more people ti help. Thanks for you help so far.

Tystyk252

I have a Toshiba Satellite L300-1AS laptop and have got windows vista home premium service pack 1. I have recently had trouble with my computer when it restarts, it will load up to the point just before you have to input your password and then will COME up with an error message saying 'Windows visual studio c++ 2005 has REQUESTED to be terminated in an unusual way' and then won't load any further. For some reason it seems to be linked to when i updated my iTunes when the version before the current one came out as I have tried loading it up in safe mode and for a while i managed to get my computer to work by system restoring it to a point before I updated iTunes. This was fine for a week or so but now the system restore doesn't go back far enough and so doesn't work, however i have not reinstalled iTunes since. I'm pretty stumped as to what else to try so I was wondering if anyone else has EVER had a SIMILAR problem?

Thanks

It's interesting. You didn't have any problems running Vista restoration, using recovery DVDs, correct?
What was the original reason for running recovery process?From what I have been told it simply, and suddenly, started doing this thing with going through the above mentioned cycle of booting through the screens and ending on the Start up Repair. I've got the various "Signature" numbers generated by the Start up Repair as follows;

Sig. 3 6.0.6000.16386.6.0.6000.16386

and I've been combing MS website following different threads that have had the same problem (And they are VERY numerous! ;-)) As I mentioned above "this seems to be a common problem." Now if I can just find the person that has figured it out! LOL I have a tendency to lean toward thinking that it is a software problem. Possibly a corrupted, or missing file in the startup sequence. Corrupted boot sector file or? I also think the the "Format" done by the "Restore" DISC is probably a very low level format. Therefore the 0 sector is not being wiped and rewritten. That is the one thing I haven't done yet. Trying to avoid it for obvious reasons. (i.e. the rigorous and mind bending installation of the above mentioned files after the Format and Fdisk commands. Getting my HANDS on a "Valid" command.com Autoexec.bat and Config.sys for Vista!) I'm way passed the point of worrying about saving any user made files. They were long gone after the first format from the restore disc. Just want to get the system installed to the point that I can go and start installing the SPs 1&2. Which I HEAR are giving their OWN share of problems after install. Anyway.....those are just my thoughts base on my own inexperience. ;-) That is why I'm on this site talking people like you. In hopes that someone (with more experience than me) could help shed some LIGHT on this issue. Thanks Broni Chuck <><Quote from: chucwar on November 13, 2009, 11:59:17 AM

I also think the the "Format" done by the "Restore" disc is probably a very low level format.

I upgraded from win xp to win 7 and am TRYING to import my backed up address book and files and folders from my ext hdd {clickfree type}to my win mail CONTACT LIST. I can see these files but cant action them. It says cant open csv, wab, exe files. these files are {grey SCALE} which i guess means they cant be activated. Even though the program says they have been imported, they ARENT. Can anyone help or have experienced this with a win 7 upgrade.

I use 4 computers - hard.

I use Memory Improvement Master to tell me when I'm working too hard.

My quad core Vista Machine maxes out it's CPU with 67% memory use

My dual core CPU with with Vista in safe mode varies, sometimes maxing it out the CPU, other times not.

But my single core machine with XP home uses 96% of its memory but never goes over 6% on CPU usage.

Page file usage is about 50% in all three.

I bought a new computer with Windows 7 and a dual CPU and ALTHOUGH I haven't put Memory Improvement on that computer the way it handles its work load tells me it isn't doing anything spectacular.

So should I revert all my Operating Systems to XP home or is there another issue I should consider? And will upping the memory in the XP Home machine make that stellar?

SandyQuote from: stumble on November 13, 2009, 03:59:27 AM

I use Memory Improvement Master to tell me when I'm working too hard.

So should I revert all my Operating Systems to XP home or is there another issue I should consider? And will upping the memory in the XP Home machine make that stellar?

Sandy

Whenever I try to install or uninstall a program a message pops up saying an INSTALLATION is already in progress. This has been happening for the last couple weeks. The computer has been turned off and on/restarted many times in this period and from what I can tell there are no installations in progress. Any help on this issue would be greatly appreciated!What is the EXACT message?The exact message is: "Another installation is in progress. You must complete that installation before continuing this one."

I have since found a solution though, thanks for replying though!Please download SystemLook from one of the links below and save it to your Desktop.
Download Mirror #1
Download Mirror #2

• Double-click SystemLook.exe to run it.
  
• Vista users:: RIGHT click on SystemLook.exe, click Run As Administrator
  
• Copy the content of the following BOX into the main textfield:
  

• Click the Look button to START the scan.
  
• When finished, a notepad window will open with the results of the scan. Please post this log in your next reply.

First off, not sure if this should be in the games section, but it could as Vista because this is a general problem on Vista. Feel free to move to games because this happened when I tried to install RollerCoaster Tycoon 3.

Basically it's that lame "Internal Failure... Error 0x80040707" problem. If you need any more info, like a screenshot, I guess you could Google it. Yes, I've Googled it but none of the solutions have solved my problem. Yes, I looked at my registry to see if any of those items were not directed to the RIGHT path.

Here's my DXDIAG:

Quote

------------------
System Information
------------------
Time of this report: 11/9/2009, 18:37:09
Machine name: ANDRE-PC
Operating System: Windows Vista™ Home Premium (6.0, Build 6002) Service Pack 2 (6002.vistasp2_gdr.090803-2339)
Language: English (Regional Setting: English)
System Manufacturer: HP-Pavilion
System Model: FJ463AA-ABA a6528p
BIOS: BIOS Date: 03/28/08 16:53:51 Ver: 5.22
Processor: Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz (2 CPUS), ~2.2GHz
Memory: 3062MB RAM
Page File: 1248MB used, 5087MB available
Windows DIR: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
DxDiag Version: 7.00.6002.18107 32bit Unicode

------------
DxDiag Notes
------------
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Sound Tab 2: No problems found.
Input Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)

---------------
Display Devices
---------------
Card name: Intel(R) G33/G31 Express Chipset Family
Manufacturer: Intel Corporation
Chip type: Intel(R) GMA 3100
DAC type: Internal
Device Key: Enum\PCI\VEN_8086&DEV_29C2&SUBSYS_2A6F103C&REV_02
Display Memory: 286 MB
Dedicated Memory: 0 MB
Shared Memory: 286 MB
Current Mode: 1280 x 1024 (32 bit) (60Hz)
Monitor: Generic PnP Monitor
Driver Name: igdumdx32.dll
Driver Version: 7.15.0010.1666 (English)
DDI Version: 9Ex
BGRA Supported: Yes
Driver Attributes: Final Retail
Driver Date/Size: 2/26/2009 18:34:14, 536576 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B78E66-6A82-11CF-0E75-650AA2C2CA35}
Vendor ID: 0x8086
Device ID: 0x29C2
SubSys ID: 0x2A6F103C
Revision ID: 0x0002
Revision ID: 0x0002
Video Accel: ModeMPEG2_A ModeMPEG2_C
Deinterlace Caps: {AEDC1D5D-8546-440E-AAB2-B69FA725AF82}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_FieldAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
{AEDC1D5D-8546-440E-AAB2-B69FA725AF82}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_FieldAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
{AEDC1D5D-8546-440E-AAB2-B69FA725AF82}: Format(In/Out)=(YV12,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_FieldAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YV12,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
{AEDC1D5D-8546-440E-AAB2-B69FA725AF82}: Format(In/Out)=(NV12,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_FieldAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
{AEDC1D5D-8546-440E-AAB2-B69FA725AF82}: Format(In/Out)=(IMC1,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_FieldAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC1,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC1,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
{AEDC1D5D-8546-440E-AAB2-B69FA725AF82}: Format(In/Out)=(IMC2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_FieldAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
{AEDC1D5D-8546-440E-AAB2-B69FA725AF82}: Format(In/Out)=(IMC3,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_FieldAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC3,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC3,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
{AEDC1D5D-8546-440E-AAB2-B69FA725AF82}: Format(In/Out)=(IMC4,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_FieldAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC4,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC4,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled

-------------
Sound Devices
-------------
Description: Speakers (SB Audigy LS)
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1102&DEV_0007&SUBSYS_10021102&REV_00
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: P17.sys
Driver Version: 5.12.0001.2020 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 10/16/2009 02:11:56, 1168896 bytes
Other Files:
Driver Provider: CREATIVE
HW Accel Level: Basic
Cap Flags: 0xF1F
Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No

Description: Digital Audio Interface (SB Audigy LS)
Default Sound Playback: No
Default Voice Playback: No
Hardware ID: PCI\VEN_1102&DEV_0007&SUBSYS_10021102&REV_00
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: P17.sys
Driver Version: 5.12.0001.2020 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 10/16/2009 02:11:56, 1168896 bytes
Other Files:
Driver Provider: CREATIVE
HW Accel Level: Basic
Cap Flags: 0xF1F
Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No

---------------------
Sound Capture Devices
---------------------
Description: Microphone (SB Audigy LS)
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: P17.sys
Driver Version: 5.12.0001.2020 (English)
Driver Attributes: Final Retail
Date and Size: 10/16/2009 02:11:56, 1168896 bytes
Cap Flags: 0x1
Format Flags: 0xFFFFF

Description: Line-In (SB Audigy LS)
Default Sound Capture: No
Default Voice Capture: No
Driver Name: P17.sys
Driver Version: 5.12.0001.2020 (English)
Driver Attributes: Final Retail
Date and Size: 10/16/2009 02:11:56, 1168896 bytes
Cap Flags: 0x1
Format Flags: 0xFFFFF

Description: S/PDIF-In (SB Audigy LS)
Default Sound Capture: No
Default Voice Capture: No
Driver Name: P17.sys
Driver Version: 5.12.0001.2020 (English)
Driver Attributes: Final Retail
Date and Size: 10/16/2009 02:11:56, 1168896 bytes
Cap Flags: 0x1
Format Flags: 0xFFFFF

Description: TAD-In (SB Audigy LS)
Default Sound Capture: No
Default Voice Capture: No
Driver Name: P17.sys
Driver Version: 5.12.0001.2020 (English)
Driver Attributes: Final Retail
Date and Size: 10/16/2009 02:11:56, 1168896 bytes
Cap Flags: 0x1
Format Flags: 0xFFFFF

-------------------
DirectInput Devices
-------------------
Device Name: Mouse
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a

Device Name: Keyboard
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a

Poll w/ Interrupt: No

-----------
USB Devices
-----------
+ USB Root Hub
| Vendor/Product ID: 0x8086, 0x2937
| Matching Device ID: usb\root_hub
| Service: usbhub
| Driver: usbhub.sys, 4/10/2009 20:43:18, 196096 bytes
| Driver: usbd.sys, 1/20/2008 18:23:03, 5888 bytes
|
+-+ USB Human Interface Device
| | Vendor/Product ID: 0x04F3, 0x0212
| | Location: Port_#0002.Hub_#0001
| | Matching Device ID: generic_hid_device
| | Service: HidUsb
| | Driver: hidusb.sys, 4/10/2009 20:42:50, 12800 bytes
| | Driver: hidclass.sys, 4/10/2009 20:42:50, 39424 bytes
| | Driver: hidparse.sys, 1/20/2008 18:23:26, 25472 bytes
| |
| +-+ HID-compliant mouse
| | | Vendor/Product ID: 0x04F3, 0x0212
| | | Matching Device ID: hid_device_system_mouse
| | | Service: mouhid
| | | Driver: mouhid.sys, 1/20/2008 18:23:20, 15872 bytes
| | | Driver: mouclass.sys, 1/20/2008 18:23:20, 34360 bytes

----------------
Gameport Devices
----------------

------------
PS/2 Devices
------------
+ Enhanced Multimedia PS/2 Keyboard
| Matching Device ID: acpi\pnp0303
| Upper Filters: PS2
| Service: i8042prt
| Driver: PS2.sys, 12/12/2005 08:27:00, 19072 bytes
| Driver: i8042prt.sys, 1/20/2008 18:23:20, 54784 bytes
| Driver: kbdclass.sys, 1/20/2008 18:23:23, 35384 bytes
|
+ Terminal Server Keyboard Driver
| Matching Device ID: root\rdp_kbd
| Upper Filters: kbdclass
| Service: TermDD
| Driver: i8042prt.sys, 1/20/2008 18:23:20, 54784 bytes
| Driver: kbdclass.sys, 1/20/2008 18:23:23, 35384 bytes
|
+ Terminal Server Mouse Driver
| Matching Device ID: root\rdp_mou
| Upper Filters: mouclass
| Service: TermDD
| Driver: termdd.sys, 4/10/2009 22:32:54, 53224 bytes
| Driver: sermouse.sys, 1/20/2008 18:23:20, 19968 bytes
| Driver: mouclass.sys, 1/20/2008 18:23:20, 34360 bytes

------------------------
Disk & DVD/CD-ROM Drives
------------------------
Drive: C:
Free Space: 394.3 GB
Total Space: 466.5 GB
File System: NTFS
Model: SAMSUNG HD501LJ

Drive: D:
Free Space: 1.4 GB
Total Space: 10.4 GB
File System: NTFS
Model: SAMSUNG HD501LJ

Drive: E:
Model: ATAPI DVD A DH16A6L
Driver: c:\windows\system32\drivers\cdrom.sys, 6.00.6002.18005 (English), 4/10/2009 20:39:18, 67072 bytes

Drive: L:
Model: XUREL LY709IJ0LMN4 SCSI CdRom Device
Driver: c:\windows\system32\drivers\cdrom.sys, 6.00.6002.18005 (English), 4/10/2009 20:39:18, 67072 bytes

--------------
System Devices
--------------
Name: Intel(R) G33/G31 Express Chipset Family
Device ID: PCI\VEN_8086&DEV_29C2&SUBSYS_2A6F103C&REV_02\3&11583659&0&10
Driver: C:\Windows\system32\DRIVERS\igdkmd32.sys, 7.15.0010.1666 (English), 2/26/2009 18:39:50, 4569088 bytes
Driver: C:\Windows\system32\igdumd32.dll, 7.15.0010.1666 (English), 2/26/2009 18:39:46, 3821568 bytes
Driver: C:\Windows\system32\iglhxs32.vp, 2/26/2009 19:15:24, 39872 bytes
Driver: C:\Windows\system32\iglhxo32.vp, 2/26/2009 17:57:46, 2096 bytes
Driver: C:\Windows\system32\iglhxc32.vp, 3/25/2008 00:19:34, 2096 bytes
Driver: C:\Windows\system32\hccutils.dll, 7.14.0010.1666 (English), 2/26/2009 18:03:52, 94208 bytes
Driver: C:\Windows\system32\igfxsrvc.dll, 7.14.0010.1666 (English), 2/26/2009 18:04:20, 51712 bytes
Driver: C:\Windows\system32\igfxsrvc.exe, 7.14.0010.1666 (English), 2/26/2009 18:57:18, 252952 bytes
Driver: C:\Windows\system32\igfxpph.dll, 7.14.0010.1666 (English), 2/26/2009 18:04:42, 200192 bytes
Driver: C:\Windows\system32\igfxcpl.cpl, 7.14.0010.1666 (English), 2/26/2009 18:04:32, 119296 bytes
Driver: C:\Windows\system32\igfxcfg.exe, 7.14.0010.1666 (English), 2/26/2009 18:57:14, 668696 bytes
Driver: C:\Windows\system32\igfxdev.dll, 7.14.0010.1666 (English), 2/26/2009 18:03:46, 210432 bytes
Driver: C:\Windows\system32\igfxdo.dll, 7.14.0010.1666 (English), 2/26/2009 18:04:02, 130048 bytes
Driver: C:\Windows\system32\igfxtray.exe, 7.14.0010.1666 (English), 2/26/2009 18:57:20, 141848 bytes
Driver: C:\Windows\system32\hkcmd.exe, 7.14.0010.1666 (English), 2/26/2009 18:57:12, 173592 bytes
Driver: C:\Windows\system32\igfxress.dll, 7.14.0010.1666 (English), 2/26/2009 18:03:46, 5702656 bytes
Driver: C:\Windows\system32\igfxpers.exe, 7.14.0010.1666 (English), 2/26/2009 18:57:16, 150552 bytes
Driver: C:\Windows\system32\igfxTMM.dll, 7.14.0010.1666 (English), 2/26/2009 18:05:12, 257536 bytes
Driver: C:\Windows\system32\TVWSetup.exe, 1.00.0001.0000 (English), 2/26/2009 18:57:22, 8198680 bytes
Driver: C:\Windows\system32\igfxext.exe, 7.14.0010.1666 (English), 2/26/2009 18:57:14, 173080 bytes
Driver: C:\Windows\system32\igfxexps.dll, 7.14.0010.1666 (English), 2/26/2009 18:04:34, 23552 bytes
Driver: C:\Windows\system32\oemdspif.dll, 7.14.0010.1666 (English), 2/26/2009 18:05:04, 59392 bytes
Driver: C:\Windows\system32\igfxrara.lrc, 7.14.0010.1666 (English), 2/26/2009 18:08:02, 252416 bytes
Driver: C:\Windows\system32\igfxrchs.lrc, 7.14.0010.1666 (English), 2/26/2009 18:08:02, 178176 bytes
Driver: C:\Windows\system32\igfxrcht.lrc, 7.14.0010.1666 (English), 2/26/2009 18:08:02, 179712 bytes
Driver: C:\Windows\system32\igfxrdan.lrc, 7.14.0010.1666 (English), 2/26/2009 18:08:02, 280576 bytes
Driver: C:\Windows\system32\igfxrdeu.lrc, 7.14.0010.1666 (English), 2/26/2009 18:08:04, 303616 bytes
Driver: C:\Windows\system32\igfxrenu.lrc, 7.14.0010.1666 (English), 2/26/2009 18:03:46, 275968 bytes
Driver: C:\Windows\system32\igfxresp.lrc, 7.14.0010.1666 (English), 2/26/2009 18:08:04, 303104 bytes
Driver: C:\Windows\system32\igfxrfin.lrc, 7.14.0010.1666 (English), 2/26/2009 18:08:04, 281088 bytes
Driver: C:\Windows\system32\igfxrfra.lrc, 7.14.0010.1666 (English), 2/26/2009 18:08:06, 303104 bytes
Driver: C:\Windows\system32\igfxrheb.lrc, 7.14.0010.1666 (English), 2/26/2009 18:08:06, 249856 bytes
Driver: C:\Windows\system32\igfxrita.lrc, 7.14.0010.1666 (English), 2/26/2009 18:08:06, 304640 bytes
Driver: C:\Windows\system32\igfxrjpn.lrc, 7.14.0010.1666 (English), 2/26/2009 18:08:08, 206848 bytes
Driver: C:\Windows\system32\igfxrkor.lrc, 7.14.0010.1666 (English), 2/26/2009 18:08:08, 205312 bytes
Driver: C:\Windows\system32\igfxrnld.lrc, 7.14.0010.1666 (English), 2/26/2009 18:08:08, 299008 bytes
Driver: C:\Windows\system32\igfxrnor.lrc, 7.14.0010.1666 (English), 2/26/2009 18:08:08, 279552 bytes
Driver: C:\Windows\system32\igfxrplk.lrc, 7.14.0010.1666 (English), 2/26/2009 18:08:10, 287744 bytes
Driver: C:\Windows\system32\igfxrptb.lrc, 7.14.0010.1666 (English), 2/26/2009 18:08:10, 289280 bytes
Driver: C:\Windows\system32\igfxrptg.lrc, 7.14.0010.1666 (English), 2/26/2009 18:08:10, 294912 bytes
Driver: C:\Windows\system32\igfxrrus.lrc, 7.14.0010.1666 (English), 2/26/2009 18:08:10, 291328 bytes
Driver: C:\Windows\system32\igfxrsky.lrc, 7.14.0010.1666 (English), 2/26/2009 18:08:12, 282624 bytes
Driver: C:\Windows\system32\igfxrslv.lrc, 7.14.0010.1666 (English), 2/26/2009 18:08:12, 277504 bytes
Driver: C:\Windows\system32\igfxrsve.lrc, 7.14.0010.1666 (English), 2/26/2009 18:08:12, 282624 bytes
Driver: C:\Windows\system32\igfxrtha.lrc, 7.14.0010.1666 (English), 2/26/2009 18:08:12, 262656 bytes
Driver: C:\Windows\system32\igfxrcsy.lrc, 7.14.0010.1666 (English), 2/26/2009 18:08:02, 282624 bytes
Driver: C:\Windows\system32\igfxrell.lrc, 7.14.0010.1666 (English), 2/26/2009 18:08:04, 310784 bytes
Driver: C:\Windows\system32\igfxrhun.lrc, 7.14.0010.1666 (English), 2/26/2009 18:08:06, 288256 bytes
Driver: C:\Windows\system32\igfxrtrk.lrc, 7.14.0010.1666 (English), 2/26/2009 18:08:12, 279040 bytes
Driver: C:\Windows\system32\ig4icd32.dll, 7.15.0010.1666 (English), 2/26/2009 18:16:42, 4112384 bytes
Driver: C:\Windows\system32\ig4dev32.dll, 7.15.0010.1666 (English), 2/26/2009 18:16:54, 2674688 bytes
Driver: C:\Windows\system32\igdumdx32.dll, 7.15.0010.1666 (English), 2/26/2009 18:34:14, 536576 bytes
Driver: C:\Windows\system32\igfxCoIn_v1666.dll, 1.01.0016.0000 (English), 2/26/2009 18:49:24, 151552 bytes

Name: Intel(R) G33/G31/P35 Express Chipset Processor to I/O Controller - 29C0
Device ID: PCI\VEN_8086&DEV_29C0&SUBSYS_2A6F103C&REV_02\3&11583659&0&00
Driver: n/a

Name: Intel(R) ICH9 Family PCI Express Root Port 3 - 2944
Device ID: PCI\VEN_8086&DEV_2944&SUBSYS_2A6F103C&REV_02\3&11583659&0&E2
Driver: C:\Windows\system32\DRIVERS\pci.sys, 6.00.6002.18005 (English), 4/10/2009 22:32:56, 149480 bytes

Name: Intel(R) ICH9 Family PCI Express Root Port 2 - 2942
Device ID: PCI\VEN_8086&DEV_2942&SUBSYS_2A6F103C&REV_02\3&11583659&0&E1
Driver: C:\Windows\system32\DRIVERS\pci.sys, 6.00.6002.18005 (English), 4/10/2009 22:32:56, 149480 bytes

Name: Intel(R) ICH9 Family PCI Express Root Port 1 - 2940
Device ID: PCI\VEN_8086&DEV_2940&SUBSYS_2A6F103C&REV_02\3&11583659&0&E0
Driver: C:\Windows\system32\DRIVERS\pci.sys, 6.00.6002.18005 (English), 4/10/2009 22:32:56, 149480 bytes

Name: Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C
Device ID: PCI\VEN_8086&DEV_293C&SUBSYS_2A6F103C&REV_02\3&11583659&0&D7
Driver: C:\Windows\system32\drivers\usbehci.sys, 6.00.6002.18005 (English), 4/10/2009 20:42:54, 39936 bytes
Driver: C:\Windows\system32\drivers\usbport.sys, 6.00.6002.18005 (English), 4/10/2009 20:42:58, 226304 bytes
Driver: C:\Windows\system32\drivers\usbhub.sys, 6.00.6002.18005 (English), 4/10/2009 20:43:18, 196096 bytes
Driver: C:\Windows\system32\hccoin.dll, 6.00.6000.16386 (English), 11/2/2006 01:46:05, 8704 bytes
Driver: C:\Windows\system32\hcrstco.dll, 6.00.6001.18000 (English), 1/20/2008 18:23:03, 15872 bytes

Name: Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A
Device ID: PCI\VEN_8086&DEV_293A&SUBSYS_2A6F103C&REV_02\3&11583659&0&EF
Driver: C:\Windows\system32\drivers\usbehci.sys, 6.00.6002.18005 (English), 4/10/2009 20:42:54, 39936 bytes
Driver: C:\Windows\system32\drivers\usbport.sys, 6.00.6002.18005 (English), 4/10/2009 20:42:58, 226304 bytes
Driver: C:\Windows\system32\drivers\usbhub.sys, 6.00.6002.18005 (English), 4/10/2009 20:43:18, 196096 bytes
Driver: C:\Windows\system32\hccoin.dll, 6.00.6000.16386 (English), 11/2/2006 01:46:05, 8704 bytes
Driver: C:\Windows\system32\hcrstco.dll, 6.00.6001.18000 (English), 1/20/2008 18:23:03, 15872 bytes

Name: Intel(R) ICH9 Family USB Universal Host Controller - 2939
Device ID: PCI\VEN_8086&DEV_2939&SUBSYS_2A6F103C&REV_02\3&11583659&0&EB
Driver: C:\Windows\system32\drivers\usbuhci.sys, 6.00.6001.18000 (English), 1/20/2008 18:23:03, 23552 bytes
Driver: C:\Windows\system32\drivers\usbport.sys, 6.00.6002.18005 (English), 4/10/2009 20:42:58, 226304 bytes
Driver: C:\Windows\system32\drivers\usbhub.sys, 6.00.6002.18005 (English), 4/10/2009 20:43:18, 196096 bytes

Name: Intel(R) ICH9 Family USB Universal Host Controller - 2938
Device ID: PCI\VEN_8086&DEV_2938&SUBSYS_2A6F103C&REV_02\3&11583659&0&D1
Driver: C:\Windows\system32\drivers\usbuhci.sys, 6.00.6001.18000 (English), 1/20/2008 18:23:03, 23552 bytes
Driver: C:\Windows\system32\drivers\usbport.sys, 6.00.6002.18005 (English), 4/10/2009 20:42:58, 226304 bytes
Driver: C:\Windows\system32\drivers\usbhub.sys, 6.00.6002.18005 (English), 4/10/2009 20:43:18, 196096 bytes

Name: Intel(R) ICH9 Family USB Universal Host Controller - 2937
Device ID: PCI\VEN_8086&DEV_2937&SUBSYS_2A6F103C&REV_02\3&11583659&0&D0
Driver: C:\Windows\system32\drivers\usbuhci.sys, 6.00.6001.18000 (English), 1/20/2008 18:23:03, 23552 bytes
Driver: C:\Windows\system32\drivers\usbport.sys, 6.00.6002.18005 (English), 4/10/2009 20:42:58, 226304 bytes
Driver: C:\Windows\system32\drivers\usbhub.sys, 6.00.6002.18005 (English), 4/10/2009 20:43:18, 196096 bytes

Name: Intel(R) ICH9 Family USB Universal Host Controller - 2936
Device ID: PCI\VEN_8086&DEV_2936&SUBSYS_2A6F103C&REV_02\3&11583659&0&EA
Driver: C:\Windows\system32\drivers\usbuhci.sys, 6.00.6001.18000 (English), 1/20/2008 18:23:03, 23552 bytes
Driver: C:\Windows\system32\drivers\usbport.sys, 6.00.6002.18005 (English), 4/10/2009 20:42:58, 226304 bytes
Driver: C:\Windows\system32\drivers\usbhub.sys, 6.00.6002.18005 (English), 4/10/2009 20:43:18, 196096 bytes

Name: Intel(R) ICH9 Family USB Universal Host Controller - 2935
Device ID: PCI\VEN_8086&DEV_2935&SUBSYS_2A6F103C&REV_02\3&11583659&0&E9
Driver: C:\Windows\system32\drivers\usbuhci.sys, 6.00.6001.18000 (English), 1/20/2008 18:23:03, 23552 bytes
Driver: C:\Windows\system32\drivers\usbport.sys, 6.00.6002.18005 (English), 4/10/2009 20:42:58, 226304 bytes
Driver: C:\Windows\system32\drivers\usbhub.sys, 6.00.6002.18005 (English), 4/10/2009 20:43:18, 196096 bytes

Name: Intel(R) ICH9 Family USB Universal Host Controller - 2934
Device ID: PCI\VEN_8086&DEV_2934&SUBSYS_2A6F103C&REV_02\3&11583659&0&E8
Driver: C:\Windows\system32\drivers\usbuhci.sys, 6.00.6001.18000 (English), 1/20/2008 18:23:03, 23552 bytes
Driver: C:\Windows\system32\drivers\usbport.sys, 6.00.6002.18005 (English), 4/10/2009 20:42:58, 226304 bytes
Driver: C:\Windows\system32\drivers\usbhub.sys, 6.00.6002.18005 (English), 4/10/2009 20:43:18, 196096 bytes

Name: Intel(R) ICH9 Family SMBus Controller - 2930
Device ID: PCI\VEN_8086&DEV_2930&SUBSYS_2A6F103C&REV_02\3&11583659&0&FB
Driver: n/a

Name: Intel(R) ICH9R LPC Interface Controller - 2916
Device ID: PCI\VEN_8086&DEV_2916&SUBSYS_2A6F103C&REV_02\3&11583659&0&F8
Driver: C:\Windows\system32\DRIVERS\msisadrv.sys, 6.00.6001.18000 (English), 1/20/2008 18:23:01, 16440 bytes

Name: Intel(R) ICH8R/ICH9R/ICH10R/DO SATA RAID Controller
Device ID: PCI\VEN_8086&DEV_2822&SUBSYS_2A6F103C&REV_02\3&11583659&0&FA
Driver: C:\Windows\system32\DRIVERS\iaStor.sys, 8.07.0000.1007 (English), 12/4/2008 20:34:52, 328728 bytes

Name: Intel(R) 82801 PCI Bridge - 244E
Device ID: PCI\VEN_8086&DEV_244E&SUBSYS_2A6F103C&REV_92\3&11583659&0&F0
Driver: C:\Windows\system32\DRIVERS\pci.sys, 6.00.6002.18005 (English), 4/10/2009 22:32:56, 149480 bytes

Name: PCIe Soft Data Fax Modem with SmartCP
Device ID: PCI\VEN_14F1&DEV_2F82&SUBSYS_000014F1&REV_00\4&37C315F9&0&00E1
Driver: C:\Windows\SYSTEM32\DRIVERS\HSX_CNXT.sys, 7.71.0000.0000 (English), 2/12/2008 07:26:20, 661504 bytes
Driver: C:\Windows\SYSTEM32\DRIVERS\HSXHWBS3.sys, 7.71.0000.0000 (English), 2/12/2008 07:27:34, 207360 bytes
Driver: C:\Windows\SYSTEM32\DRIVERS\HSX_DP.sys, 7.71.0000.0000 (English), 2/12/2008 07:25:22, 985600 bytes
Driver: C:\Windows\SYSTEM32\DRIVERS\HSFProf.cty, 12/24/2007 07:29:02, 145890 bytes
Driver: C:\Windows\SYSTEM32\DRIVERS\mdmxsdk.sys, 1.00.0002.0012 (English), 6/19/2006 06:26:58, 12672 bytes
Driver: C:\Windows\SYSTEM32\DRIVERS\XAudio.sys, 1.00.0015.0000 (English), 10/18/2007 07:36:54, 8704 bytes
Driver: C:\Windows\SYSTEM32\DRIVERS\XAudio.exe, 1.00.0015.0000 (English), 10/18/2007 07:37:04, 386560 bytes
Driver: C:\Windows\system32\mdmxsdk.dll, 1.00.0002.0012 (English), 6/19/2006 06:26:50, 94208 bytes
Driver: C:\Program Files\CONEXANT\CNXT_MODEM_PCI_HSF\UIU32m.exe, 4.00.0041.0000 (English), 3/11/2008 02:44:44, 1024000 bytes
Driver: C:\Windows\system32\UCI32M27.dll, 2.00.0027.0000 (English), 1/25/2008 03:55:36, 229376 bytes

Name: AGERE OHCI Compliant IEEE 1394 Host Controller
Device ID: PCI\VEN_11C1&DEV_5811&SUBSYS_00000000&REV_70\4&3B75382B&0&28F0
Driver: C:\Windows\system32\DRIVERS\ohci1394.sys, 6.00.6002.18005 (English), 4/10/2009 20:43:06, 62208 bytes
Driver: C:\Windows\system32\DRIVERS\1394bus.sys, 6.00.6001.18000 (English), 1/20/2008 18:23:21, 53376 bytes

Name: PCI Input Device
Device ID: PCI\VEN_1102&DEV_7005&SUBSYS_10021102&REV_00\4&3B75382B&0&01F0
Driver: n/a

Name: SB Audigy LS
Device ID: PCI\VEN_1102&DEV_0007&SUBSYS_10021102&REV_00\4&3B75382B&0&00F0
Driver: C:\Windows\system32\drivers\P17.sys, 5.12.0001.2020 (English), 10/16/2009 02:11:56, 1168896 bytes
Driver: C:\Windows\system32\P17res.dll, 5.12.0001.2001 (English), 2/26/2009 08:36:34, 140800 bytes
Driver: C:\Windows\system32\P17APO32.dll, 1.00.0006.0000 (English), 4/21/2009 09:38:30, 506368 bytes
Driver: C:\Windows\system32\P17pld32.dll, 1.00.0006.0000 (English), 4/21/2009 09:38:50, 47104 bytes
Driver: C:\Windows\system32\OemSpiE.dll, 1.00.0012.0004 (English), 8/13/2009 07:19:42, 144384 bytes
Driver: C:\Windows\system32\P17RunE.dll, 1.00.0001.0002 (English), 3/28/2008 14:57:30, 14848 bytes
Driver: C:\Windows\P17EP.ini, 11/13/2008 13:07:24, 2177 bytes
Driver: C:\Windows\P17EPLS.ini, 6/7/2007 12:25:42, 1578 bytes
Driver: C:\Windows\P17EP51.ini, 12/4/2007 12:20:30, 1489 bytes
Driver: C:\Windows\ResDefE.exe, 2.00.0005.0000 (English), 8/26/2008 08:30:32, 8704 bytes
Driver: C:\Windows\system32\AddCat.exe, 1.00.0000.0001 (English), 12/4/2006 13:56:48, 42496 bytes
Driver: C:\Windows\system32\P17APO32.p17, 4/21/2009 02:38:06, 8035 bytes
Driver: C:\Windows\system32\APOIM32.exe, 2.53.0000.0000 (English), 8/25/2009 02:31:18, 613503 bytes
Driver: C:\Windows\system32\AppSetup.exe, 1.00.0024.0003 (English), 4/21/2009 17:37:06, 32177128 bytes
Driver: C:\Windows\system32\ctzapxx.ini, 3/8/2005 06:17:00, 54 bytes
Driver: C:\Windows\system32\ludap17.ini, 10/16/2009 06:50:54, 3930 bytes
Driver: C:\Windows\system32\ctcoins1.dll, 3.00.0002.0051 (English), 7/28/2009 13:09:06, 86016 bytes
Driver: C:\Windows\system32\ctdvins1.dll, 0.05.0000.0051 (English), 7/28/2009 13:09:08, 181760 bytes
Driver: C:\Windows\system32\drivers\drmk.sys, 6.00.6001.18000 (English), 1/20/2008 18:23:20, 130048 bytes
Driver: C:\Windows\system32\drivers\portcls.sys, 6.00.6002.18005 (English), 4/10/2009 20:42:52, 167936 bytes

Name: Realtek PCIe GBE Family Controller
Device ID: PCI\VEN_10EC&DEV_8168&SUBSYS_2A6F103C&REV_02\4&5D52B92&0&00E2
Driver: n/a

------------------
DirectShow Filters
------------------

DirectShow Filters:
WMAudio Decoder DMO,0x00800800,1,1,,
WMAPro over S/PDIF DMO,0x00600800,1,1,,
WMSpeech Decoder DMO,0x00600800,1,1,,
MP3 Decoder DMO,0x00600800,1,1,,
Mpeg4s Decoder DMO,0x00800001,1,1,,
WMV Screen decoder DMO,0x00600800,1,1,,
WMVideo Decoder DMO,0x00800001,1,1,,
Mpeg43 Decoder DMO,0x00800001,1,1,,
Mpeg4 Decoder DMO,0x00800001,1,1,,
Full Screen Renderer,0x00200000,1,0,,6.06.6002.18005
Gretech ASF Source Filter,0x00200000,0,1,GSFU.ax,
Multiple File Output,0x00200000,2,2,WMM2FILT.dll,
Gretech MPEG Source Filter,0x00200000,0,1,GSFU.ax,
CT Upsampler filter,0x00100000,1,1,Upsample.ax,2.00.0005.0000
WMT Black Frame Generator,0x00200000,1,1,WMM2FILT.dll,
WMT Import Filter,0x00200000,0,1,WMM2FILT.dll,
Creative Wave Writer,0x00200000,1,0,WavWrite.ax,3.01.0004.0000
DV Muxer,0x00400000,0,0,,6.06.6001.18000
Color Space Converter,0x00400001,1,1,,6.06.6002.18005
WMT Interlacer,0x00200000,1,1,WMM2FILT.dll,
WM ASF Reader,0x00400000,0,0,,11.00.6001.7000
Screen Capture filter,0x00200000,0,1,wmpsrcwp.dll,11.00.6001.7000
AVI Splitter,0x00600000,1,1,,6.06.6002.18005
VGA 16 Color Ditherer,0x00400000,1,1,,6.06.6002.18005
Microsoft MPEG-2 Video Decoder,0x005fffff,2,4,msmpeg2vdec.dll,11.00.6001.7110
BPM Metadata,0x001fffff,1,1,MetaBPMu.ax,2.00.0002.0000
AC3 Parser Filter,0x00600000,1,1,mpg2splt.ax,6.06.6002.18005
WMT Format Conversion,0x00200000,1,1,WMM2FILT.dll,
9x8Resize,0x00200000,1,1,WMM2FILT.dll,
CT Time-Scaling filter,0x00100000,1,1,TimeScal.ax,2.03.0009.0000
StreamBufferSink,0x00200000,0,0,sbe.dll,6.06.6001.18000
WMT Virtual Source,0x00200000,0,1,WMM2FILT.dll,
Microsoft TV Caption Decoder,0x00200001,1,0,MSTVCapn.dll,6.00.6001.18000
MJPEG Decompressor,0x00600000,1,1,,6.06.6002.18005
CBVA DMO wrapper filter,0x00200000,1,1,cbva.dll,6.00.6001.18322
MPEG-I Stream Splitter,0x00600000,1,2,,6.06.6002.18005
SAMI (CC) Parser,0x00400000,1,1,,6.06.6002.18005
VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.6001.18000
MPEG-2 Splitter,0x005fffff,1,0,mpg2splt.ax,6.06.6002.18005
WMT AudioAnalyzer,0x00200000,1,1,WMM2FILT.dll,
Microsoft MPEG-2 Video Encoder,0x00200000,2,0,msmpeg2enc.dll,11.00.6001.7000
Gretech Video Filter,0x00200000,1,1,GVF.ax,
Stretch Video,0x00200000,1,1,WMM2FILT.dll,
Internal Script Command Renderer,0x00800001,1,0,,6.06.6002.18005
MPEG Audio Decoder,0x03680001,1,1,,6.06.6002.18005
Gretech Theora Source Filter,0x00200000,0,1,GSFU.ax,
Gretech FLV Source Filter,0x00200000,0,1,GSFU.ax,
DV Splitter,0x00600000,1,2,,6.06.6001.18000
Video Mixing Renderer 9,0x00200000,1,0,,6.06.6002.18005
PCM to EXT,0x00200000,0,0,Pcm2Ext.ax,6.00.0002.0000
Gretech AsfEx Source Filter,0x00200000,0,1,GSFU.ax,
CT Karaoke filter,0x00100000,1,1,Karaoke.ax,2.00.0012.0000
Microsoft MPEG-2 Encoder,0x00200000,2,1,msmpeg2enc.dll,11.00.6001.7000
Frame Eater,0x00200000,1,1,WMM2FILT.dll,
Creative AC3 Source Filter,0x00400000,0,1,AC3Srcu.ax,3.02.0001.0000
Creative PCM Raw Writer,0x00200000,1,0,RawWritu.ax,1.00.0000.0000
Allocator Fix,0x00200000,1,1,WMM2FILT.dll,
CT PDP filter,0x00100000,1,1,PDP.ax,1.00.0008.0000
ACM Wrapper,0x00600000,1,1,,6.06.6002.18005
Gretech AVI Source Filter,0x00200000,0,1,GSFU.ax,
Video Renderer,0x00800001,1,0,,6.06.6002.18005
Gretech Network(OGG) Filter,0x00200000,0,1,GNF.ax,
MPEG-2 Video Stream Analyzer,0x00200000,0,0,sbe.dll,6.06.6001.18000
Capture ASF Writer,0x00200000,0,0,WMM2FILT.dll,
Line 21 Decoder,0x00600000,1,1,,6.06.6002.18005
Video Port Manager,0x00600000,2,1,,6.06.6002.18005
Video Renderer,0x00400000,1,0,,6.06.6002.18005
Bitmap Generate,0x00200000,1,1,WMM2FILT.dll,
Proxy Sink,0x00200000,1,0,WMM2FILT.dll,
Proxy Source,0x00200000,0,1,WMM2FILT.dll,
CT SmartVolumeManagement filter,0x00100000,1,1,DSCompr.ax,1.00.0008.0000
Creative Audio Gain Filter,0x00200000,1,1,AudGain.ax,1.00.0000.0000
WM ASF Writer,0x00400000,0,0,,11.00.6001.7000
Gretech Audio Filter,0x00200000,1,1,GAF.ax,
VBI Surface Allocator,0x00600000,1,1,vbisurf.ax,6.00.6001.18000
Creative Flac Source Filter,0x00400000,0,1,FlacSrcu.ax,1.00.0002.0000
WMT Sample Information Filter,0x00200000,1,1,WMM2FILT.dll,
File writer,0x00200000,1,0,,6.06.6001.18000
Creative MLP Source Filter,0x00400000,0,1,MlpSrcu.ax,3.01.0000.0000
Creative File Reader Filter,0x00400000,0,1,FilReadu.ax,1.00.0005.0000
Gretech Network(FLV) Filter,0x00200000,0,1,GNF.ax,
Gretech OGG Source Filter,0x00200000,0,1,GSFU.ax,
SVM Metadata,0x001fffff,1,1,MetaSVMu.ax,2.00.0002.0000
Gretech Network(AVI) Filter,0x00200000,0,1,GNF.ax,
CT HPVirtualizer filter,0x00100000,1,1,Virtual.ax,1.00.0000.0000
Gretech MKV Source Filter,0x00200000,0,1,GSFU.ax,
WAV Dest,0x00000000,0,0,,
DVD Navigator,0x00200000,0,3,,6.06.6002.18005
WMT DV Extract,0x00200000,1,1,WMM2FILT.dll,
Overlay Mixer2,0x00200000,1,1,,6.06.6002.18005
CT CMSS3 filter,0x00100000,1,1,CMSS3.ax,3.00.0013.0000
AVI Draw,0x00600064,9,1,,6.06.6002.18005
Microsoft MPEG-2 Audio Encoder,0x00200000,2,0,msmpeg2enc.dll,11.00.6001.7000
WST Pager,0x00800000,1,1,WSTPager.ax,6.06.6001.18000
MPEG-2 Demultiplexer,0x00600000,1,1,mpg2splt.ax,6.06.6002.18005
Record Queue,0x00200000,1,1,WMM2FILT.dll,
Creative Ogg Source Filter,0x00400000,0,1,OggSrcu.ax,1.00.0001.0000
DV Video Decoder,0x00800000,1,1,,6.06.6001.18000
Creative NVF Filter,0x00400000,0,1,NvfSrcu.ax,3.01.0001.0000
Gretech Network(SHOUTcast) Filter,0x00200000,0,1,GNF.ax,
Noise Reduction,0x00100000,1,1,NoisRedu.ax,3.00.0007.0000
Gretech Network(GOM) Filter,0x00200000,0,1,GNF.ax,
SampleGrabber,0x00200000,1,1,qedit.dll,6.06.6002.18005
Null Renderer,0x00200000,1,0,qedit.dll,6.06.6002.18005
WMT Log Filter,0x00200000,1,1,WMM2FILT.dll,
Creative WMA Writer,0x00200000,1,0,WMAWrite.ax,5.00.0001.0000
MPEG-2 Sections and Tables,0x005fffff,1,0,Mpeg2Data.ax,6.06.6001.18000
Microsoft AC3 Encoder,0x00200000,1,1,msac3enc.dll,11.00.6001.7000
WMT Virtual Renderer,0x00200000,1,0,WMM2FILT.dll,
StreamBufferSource,0x00200000,0,0,sbe.dll,6.06.6001.18000
Smart Tee,0x00200000,1,2,,6.06.6001.18000
Creative WMA Source Filter,0x00400000,0,1,WmaSrc.ax,3.01.0001.0000
Overlay Mixer,0x00200000,0,0,,6.06.6002.18005
AVI Decompressor,0x00600000,1,1,,6.06.6002.18005
WMT MuxDeMux Filter,0x00200000,0,0,WMM2FILT.dll,
NetBridge,0x00200000,2,0,netbridge.dll,6.01.6001.18000
Gretech MP4 Source Filter,0x00200000,0,1,GSFU.ax,
AVI/WAV File Source,0x00400000,0,2,,6.06.6002.18005
WMT Volume,0x00200000,1,1,WMM2FILT.dll,
Wave Parser,0x00400000,1,1,,6.06.6002.18005
MIDI Parser,0x00400000,1,1,,6.06.6002.18005
Multi-file Parser,0x00400000,1,1,,6.06.6002.18005
File stream renderer,0x00400000,1,1,,6.06.6002.18005
WMT VIH2 Fix,0x00200000,1,1,WMM2FILT.dll,
Microsoft MPEG-1/DD Audio Decoder,0x005fffff,1,1,msmpeg2adec.dll,11.00.6001.7000
AVI Mux,0x00200000,1,0,,6.06.6001.18000
Line 21 Decoder 2,0x00600002,1,1,,6.06.6002.18005
File Source (Async.),0x00400000,0,1,,6.06.6002.18005
File Source (URL),0x00400000,0,1,,6.06.6002.18005
Media Center Extender Encryption Filter,0x00200000,2,2,Mcx2Filter.dll,6.01.6002.18005
AudioRecorder WAV Dest,0x00200000,0,0,,6.00.6001.18000
AudioRecorder Wave Form,0x00200000,0,0,,6.00.6001.18000
SoundRecorder Null Renderer,0x00200000,0,0,,6.00.6001.18000
Creative CDDA Source Filter,0x00400000,0,1,CDDA.ax,3.00.0003.0000
Creative LiveRecording Filter SxS,0x00400000,0,1,LiveRecu.ax,5.00.0001.0000
Creative Internet Source Filter,0x00400000,0,1,InetSrcu.ax,1.00.0000.0000
Infinite Pin Tee Filter,0x00200000,1,1,,6.06.6001.18000
WMT Switch Filter,0x00200000,1,1,WMM2FILT.dll,
Enhanced Video Renderer,0x00200000,1,0,evr.dll,6.00.6002.18005
Uncompressed Domain Shot Detection Filter,0x00200000,1,1,WMM2FILT.dll,
BDA MPEG2 Transport Information Filter,0x00200000,2,0,psisrndr.ax,6.06.6002.18005
MPEG Video Decoder,0x40000001,1,1,,6.06.6002.18005

WDM Streaming Tee/Splitter Devices:
Tee/Sink-to-Sink Converter,0x00200000,1,1,,6.00.6001.18000

Video Compressors:
WMVideo8 Encoder DMO,0x00600800,1,1,,
WMVideo9 Encoder DMO,0x00600800,1,1,,
MSScreen 9 encoder DMO,0x00600800,1,1,,
DV Video Encoder,0x00200000,0,0,,6.06.6001.18000
MJPEG Compressor,0x00200000,0,0,,6.06.6002.18005
Cinepak Codec by Radius,0x00200000,1,1,,6.06.6001.18000
Intel IYUV codec,0x00200000,1,1,,6.06.6001.18000
Intel IYUV codec,0x00200000,1,1,,6.06.6001.18000
Microsoft RLE,0x00200000,1,1,,6.06.6001.18000
Microsoft Video 1,0x00200000,1,1,,6.06.6001.18000
VP60® Simple Profile ,0x00200000,1,1,,6.06.6001.18000
VP61® Advanced Profile,0x00200000,1,1,,6.06.6001.18000

Audio Compressors:
WM Speech Encoder DMO,0x00600800,1,1,,
WMAudio Encoder DMO,0x00600800,1,1,,
IMA ADPCM,0x00200000,1,1,,6.06.6002.18005
PCM,0x00200000,1,1,,6.06.6002.18005
Microsoft ADPCM,0x00200000,1,1,,6.06.6002.18005
GSM 6.10,0x00200000,1,1,,6.06.6002.18005
CCITT A-Law,0x00200000,1,1,,6.06.6002.18005
CCITT u-Law,0x00200000,1,1,,6.06.6002.18005
MPEG Layer-3,0x00200000,1,1,,6.06.6002.18005

Audio Capture Sources:
Microphone (SB Audigy LS),0x00200000,0,0,,6.06.6001.18000
Line-In (SB Audigy LS),0x00200000,0,0,,6.06.6001.18000
S/PDIF-In (SB Audigy LS),0x00200000,0,0,,6.06.6001.18000
TAD-In (SB Audigy LS),0x00200000,0,0,,6.06.6001.18000

Midi Renderers:
Default MidiOut Device,0x00800000,1,0,,6.06.6002.18005
Microsoft GS Wavetable Synth,0x00200000,1,0,,6.06.6002.18005

WDM Streaming Capture Devices:
,0x00000000,0,0,,
SB Audigy LS,0x00200000,1,1,,6.00.6001.18000
SB Audigy LS,0x00200000,2,2,,6.00.6001.18000

WDM Streaming Rendering Devices:
,0x00000000,0,0,,
SB Audigy LS,0x00200000,1,1,,6.00.6001.18000
SB Audigy LS,0x00200000,2,2,,6.00.6001.18000

BDA Network Providers:
Microsoft ATSC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.6000.16386
Microsoft DVBC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.6000.16386
Microsoft DVBS Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.6000.16386
Microsoft DVBT Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.6000.16386
Microsoft Network Provider,0x00200000,0,1,MSNP.ax,6.06.6002.18005

Multi-Instance Capable VBI Codecs:
VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.6001.18000

BDA Transport Information Renderers:
BDA MPEG2 Transport Information Filter,0x00600000,2,0,psisrndr.ax,6.06.6002.18005
MPEG-2 Sections and Tables,0x00600000,1,0,Mpeg2Data.ax,6.06.6001.18000

BDA CP/CA Filters:
Decrypt/Tag,0x00600000,1,0,EncDec.dll,6.06.6002.18005
Encrypt/Tag,0x00200000,0,0,EncDec.dll,6.06.6002.18005
XDS Codec,0x00200000,0,0,EncDec.dll,6.06.6002.18005

WDM Streaming Communication Transforms:
Tee/Sink-to-Sink Converter,0x00200000,1,1,,6.00.6001.18000

Audio Renderers:
Speakers (SB Audigy LS),0x00200000,1,0,,6.06.6002.18005
Default DirectSound Device,0x00800000,1,0,,6.06.6002.18005
Default WaveOut Device,0x00200000,1,0,,6.06.6002.18005
Digital Audio Interface (SB Aud,0x00200000,1,0,,6.06.6002.18005
DirectSound: Digital Audio Interface (SB Audigy LS),0x00200000,1,0,,6.06.6002.18005
DirectSound: Speakers (SB Audigy LS),0x00200000,1,0,,6.06.6002.18005

Installed in W7 is Java 6 u16, but when TRYING to install latest update 17 it wont work...there isnt a mentioning that W7 is compatible, just Vista, XP etc. Anyone else with that problem? Using Opera v 10.01 as browser....Java 6 Update 17 is definitely compatible with WIN 7, at least if you're using IE. See http://www.java.com/en/download/inc/windows_new_ie.jsp. I don't know about Opera.

Ah, I found this: http://www.opera.com/support/kb/view/375/. It says:

"Opera uses the Java Runtime Environment (JRE) on your system directly instead of using the plug-in to RUN Java applets. It is not possible to use the Java plug-in with Opera."oh, wow.....lol. which means I have to uninstall it than, I downloaded it from another source....it was installed but as aid Sun java says: ooops, you have no java se 6 up17 on your PC....

Hello Guys,

In WinXP I can ACTIVATE ASP ( active server pages ) by inserting the WinXP OS DISK, then control panel, add/remove programs, and then add WINDOWS components.

In Vista and Windows 7, I don't know how to.

Im hopefull that you guys can help me with this.

Thank you so MUCH guys!

Can you clarify a bit? Are you developing ASP web pages? Maybe you need this: Microsoft Web Platform Installer 2.0

Hi,
i am trying to INSTALL windows 7 on my dell pc, and this message appears

"During install "required CD/DVD drive device driver missing!!!
the DVD is SONY CDRWDVD CRX310S.

i am not sure it this is a DVD problem because i've another external LG DVD RW, i tried to use it and same problem appears.

thanksYes, really does sound strange. How about some information about what kind of computer you have. What type of INSTALLATION are you trying?
Which version of Windows 7 are you trying to install?
I have installed Windows 7 RC as well as the Windows 7 home premium. I have used two different computers in two different DVD drives, including one in external. Never had that particular problem.
Are you trying to install to a hard drive that is completely blank?
Do you have Windows Vista available? And does Windows read your DVD drive okay? Also is this a desktop? Do you have another hard drive available that you could use to assist in the installation?
Quote

Re: windows 7 installing problem!
« Reply #1 on: November 13, 2009, 04:34:48 PM »
Yes, really does sound strange. How about some information about what kind of computer you have. What type of installation are you trying?
Which version of Windows 7 are you trying to install?
I have installed Windows 7 RC as well as the Windows 7 home premium. I have used two different computers in two different DVD drives, including one in external. Never had that particular problem.
Are you trying to install to a hard drive that is completely blank?
Do you have Windows Vista available? And does Windows read your DVD drive okay? Also is this a desktop? Do you have another hard drive available that you could use to assist in the installation?

Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2
System Manufacturer: Dell Inc.
System Model: OptiPlex 745
BIOS: Phoenix ROM BIOS PLUS Version 1.10 2.6.2
Processor: Intel(R) Pentium(R) D CPU 3.40GHz (2 CPUs)
Memory: 2046MB RAM

There does not seem to be any problem with that.
I have install Windows 7 on a Dell 280 using an external DVD and made it into a dual boot with the XP.
So you can boot the DVD, but after it starts up you get an error message? It says it does not have the driver for the DVD?
Is this a Sony OEM Smart Bay DVD-ROM?
It wont work in Windows 7 **

Any way you can beg or borrow another DVD reader?
That is the best solution. Later you can get the proper drivers from Sony.

**
Otherwise, you just have to try and try again until it works. The generic driver in Windows 7 will time out before the Sony is ready. If you keep on forcing a retry, it will somehow install windows7, but it will be a hard job

I'am trying to download windows 7 Ultimate 86x and i've 2 HDD, 250GB blank and the other one 160GB with windows xp installed on. i tried them both and same problem appears, my pc is Dell Optiplix 745 core 2 du, all SATA cables

Where are you trying to download Win 7 from?

Not sure this is a valid question but did you burn the Win 7 installation file to DVD as an ISO? What (software) did you use to burn it?

i suspected my previous hardisk was infected by virus or maybe hardware problem i don know, therefore i took it out and PLUGGED it into an external hardisk casing, and backup all my files from that hardisk at another computer, and i did...however, i bought another new hardisk which is 500GB, which i wanted to replace the old one, coz the old one was quite small only 150GB and was using windows XP pro, there after i placed my new internal hardisk which is brand new, without any windows in there into my computer, which is the desktop...and put a windows 7 DVD in there, and i thought it could help me to CLEAN up and install new windows there...and then i waited......everything went fine, but during the installation process where first is COPYING FILES, and then Expanding files AROUND 50 or 60 % it stopped, and then it shows

Windows cannot install required files. Make sure all files required for installation are available and restart the installation. Error code.0x800706F8

Or sometimes it shows blue screen, the one with

if you SEE this at the first time, please blah blah blah....

i have tried 2 different Vista DVDs installation...and 1 windows 7

all cannot....either it shows the blue screen, or stopped only..

i also tried the repairing options....which is useless as WELL....

please help.Where are all these Windows CD/DVD's from and do any of them say Microsoft on them ? ?

With an ACER computer USING vista OS,all keyboards GOT locked.I COULDNT do anythingYou might want to provide some more information.

Hello
I have a acer 4720z laptop, with Vista it was running slugish wanted to do a reinstall loaded disc 1 said it was loading files gray bar at bottom of screen, then it goes to a blue screen ( a problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop eror screen, restart you computer. if this screen appears again follow these steps: The bios in this system is not fully ACPI compliant. please contact your system vendor for a updated bios.
technial information: ... stop: oxooooooa5 (oxoooooo11,oxooooooo7,oxffd11o1o1o,oxo3ooooo1)
I did the F2 for bios changed boot , it would not load any of the disc...
Any direction would be great
DonQuote

I did the F2 for bios changed boot , it would not load any of the disc...

it does not want to load the System and Recovery Disc, but it would load a XP disc

you don't think that it says for use on a PC

I'm running Vista on an HP desktop. It has worked great for some TIME. However, when I tried to boot today it does not recognize OS software. Also, it does not read the original DVD for booting the system.First guess.
Something happened to the C MOS battery.



Sometimes all you have to do is put it in and out.
(Also check for dust and oxidation or water damage.)
Then go to the BIOS setup and confirm that it finds the drives. You may have to reset twice for it to find the drives.
Please comae back here is that does not help.Quote from: Geek-9pm on November 13, 2009, 06:41:26 PM

Sometimes all you have to do is put it in and out.

Sometimes all you have to do is put it in and out.

if the battery was not in fact dead and somehow contact was broken, removing and reinstalling it would restore the connection.

Thanks for the advice. Everything's good

Open With - Choose Default PROGRAM - Browse - navigate to where Powerpoint is installed and click on powerpoint.exe (or whatever the name of the .exe file is).Quote from: Allan on November 14, 2009, 04:06:15 PM

Open With - Choose Default Program - Browse - navigate to where Powerpoint is installed and click on powerpoint.exe (or whatever the name of the .exe file is).

Ok I went to Iraq....

When, during this forum discussion? Just curious, and wondering how that relates to the discussion here.

I have a laptop (a Dell inspiron 1420) and the screen stopped working , and i paid dell 50 bucks for them to tell me that i needed a new screen which would cost too much money to buy, so i brought an acer x203h lcd monitor which worked perfectly for almost 2 weeks. one night, i left my COMPUTER , so i guess it went into sleep mode or something, and then the acer screen said no signal.. i tried the Fn key plus F8 key, but it doesn't work when i boot the computer normally. It only works in safe mode with networking. I called acer to see if they could help, but they said the problem was with dell.. i refuse to call dell because my warranty expired. im SAD. please help me Turn off all power saving features in control panel...i tried, but it didn't work.. thanks so much though.. any other suggestions?Since it only works in safemode that tells me the incorrect video drivers are installed...Because safemode uses generic Windows drivers...
Okay so should i refer to the acer website for the correct driver? or should i refer to dell's website for the correct driver? or windows? (SORRY, i'm a LITTLE slow lol)i found the acer driver, but idk how to install it Acer is the monitor...shouldn't need drivers...
Dell is where to get your video drivers.Quote

(sorry, i'm a little slow lol)

I recently rebooted my pc dell insiron WINDOWS vista and SINCE doing so the standard games on my pc are RUNNING in SOFTWARE RENDERING mode how do i change this.