You can achieve good passive solar performance at minimal cost if you have a right ____________(a) Area(b) Location(c) Space(d) SiteThe question was asked during an interview for a job.This key question is from Orientation of Building and House Planning in section Planning of Building and Colony of Civil Engineering Drawing

You can achieve good passive solar performance at minimal cost if you

1.	You can achieve good passive solar performance at minimal cost if you have a right ____________(a) Area(b) Location(c) Space(d) SiteThe question was asked during an interview for a job.This key question is from Orientation of Building and House Planning in section Planning of Building and Colony of Civil Engineering Drawing
Answer» Right choice is (d) Site The best explanation: Where possible, CHOOSE a site that can accommodate north-facing daytime living AREAS that flow to outdoor SPACES with similar orientation. In tropical areas, northerly SOLAR access is not desirable: sites that allow maximum exposure to cooling breezes and designs that draw or funnel them through the building are preferable.

Discussion

No Comment Found

Related InterviewSolutions

Critical path is represented by a thin line indicates the line of sequence of activity which must be completed on schedule.(a) True(b) FalseI had been asked this question by my college director while I was bunking the class.The doubt is from Developing a Network topic in chapter Planning of Building and Colony of Civil Engineering Drawing
Which is not a type of building?(a) Educational Building(b) Mercantile Building(c) Institutional Building(d) Domestic buildingThe question was asked in unit test.This key question is from Building Bye-Laws topic in chapter Planning of Building and Colony of Civil Engineering Drawing
Which of the following is not a zone?(a) Residential(b) Commercial(c) Industrial(d) ElectricalThe question was posed to me in an interview for internship.Question is from Building Bye-Laws in chapter Planning of Building and Colony of Civil Engineering Drawing
Carpet Area does not include the thickness of the inner walls.(a) False(b) TrueThe question was asked in homework.My question is taken from Building Bye-Laws in portion Planning of Building and Colony of Civil Engineering Drawing
___________ is defined as a job or action to be completed, between two events within a project.(a) Planning(b) Event(c) Activity(d) SequenceThe question was posed to me during a job interview.My question is taken from Developing a Network in section Planning of Building and Colony of Civil Engineering Drawing
Combining two or more plots as a single plot is called __________(a) Amalgamation(b) Frontage(c) Bifurcation(d) Building setbackThe question was posed to me in a national level competition.My question is based upon Building Bye-Laws in section Planning of Building and Colony of Civil Engineering Drawing
Fire safety is the set of practices intended to reduce the destruction caused by fire.(a) True(b) FalseThis question was addressed to me in exam.My enquiry is from Building Bye-Laws in chapter Planning of Building and Colony of Civil Engineering Drawing
Which is not a objectives of Building Bye laws?(a) Allows disciplined and systematic growth of buildings and towns and prevent haphazard development(b) Protect safety of public against fire, noise, health hazards and structural failures(c) They provide health, safety and comfort to the people who live in buildings(d) Renovation of old buildings without any charge by the governmentI had been asked this question in an interview for internship.My doubt is from Building Bye-Laws topic in chapter Planning of Building and Colony of Civil Engineering Drawing
Total project time is the shortest project time in which the project can be completed.(a) True(b) FalseThe question was posed to me during an internship interview.The above asked question is from Developing a Network topic in chapter Planning of Building and Colony of Civil Engineering Drawing
A ____________ is defined as accomplishment in planning a project.(a) activity(b) event(c) schedule(d) planningThe question was posed to me during an internship interview.My doubt stems from Developing a Network in division Planning of Building and Colony of Civil Engineering Drawing

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment