InterviewSolution
Saved Bookmarks
InterviewSolution
This section includes InterviewSolutions, each offering curated multiple-choice questions to sharpen your Microsoft Windows knowledge and support exam preparation. Choose a topic below to get started.
| 51. |
Solve : Windows 98 will not start from DOS? |
| Answer» <html><body><p>Ok, so here is what has happened so far... <br/> <br/>A couple of days ago I restarted my laptop and it came to a screen that said, "Invalid system disk..." However, there were absolutely no floppy <a href="https://interviewquestions.tuteehub.com/tag/disks-769504" style="font-weight:bold;" target="_blank" title="Click to know more about DISKS">DISKS</a> or CD's in any drives. So I made a Windows 98 boot disk from my other computer and put it in my laptop and restarted my computer. <br/> <br/>Then, I transferred the system over to my hard drive. Once I did that, and restarted my computer it goes into the Windows 98 loading screen for about a second but then goes straight to DOS. I went into C:\WINDOWS and typed in "win" to try and run it but it says that "HIMEM.SYS" is missing. <br/> <br/>I looked through the Windows <a href="https://interviewquestions.tuteehub.com/tag/directory-11615" style="font-weight:bold;" target="_blank" title="Click to know more about DIRECTORY">DIRECTORY</a> and there is a HIMEM.SYS file there so I thought that it may have just been a corrupt file. A copied a new HIMEM.SYS file from my boot disk onto C:\WINDOWS, overwriting the old file. Then when I restart my computer it still goes to the Windows 98 loading screen and goes back to DOS and when I type "win" in C:\WINDOWS it still says that the HIMEM.SYS file is still missing. <br/> <br/>Then I tried going into CONFIG.SYS on my computer to make sure that it said DEVICE=C:\WINDOWS\HIMEM.SYS and I am <a href="https://interviewquestions.tuteehub.com/tag/pretty-2228622" style="font-weight:bold;" target="_blank" title="Click to know more about PRETTY">PRETTY</a> sure that it did but it said some stuff after that on the same line. <br/> <br/>It still says the HIMEM.SYS file is still missing and I no longer no what to do. Is there anyone that can <a href="https://interviewquestions.tuteehub.com/tag/please-601513" style="font-weight:bold;" target="_blank" title="Click to know more about PLEASE">PLEASE</a> <a href="https://interviewquestions.tuteehub.com/tag/help-239643" style="font-weight:bold;" target="_blank" title="Click to know more about HELP">HELP</a> me because I am getting really frustrated. All of the stuff that I did before, was I right in doing this? If not, please let me know so I can fix it. Thank you and any help on this issue would be greatly appreciated.<a href="http://home.earthlink.net/~leetutor/FixWin/UpDown/invaldsk.htm">http://home.earthlink.net/~leetutor/FixWin/UpDown/invaldsk.htm</a><br/><br/>What is writen in your Autoexec.bat file?</p></body></html> | |
| 52. |
Solve : creating a boot disk for win 98? |
| Answer» <html><body><p>Hi, can anyone tell me how to create a <a href="https://interviewquestions.tuteehub.com/tag/boot-251147" style="font-weight:bold;" target="_blank" title="Click to know more about BOOT">BOOT</a> disk for win 98. I think this is what I need as I am trying to revive a laptop that says "invalid system disk...replace the disk, and then press any key"<br/>I stupidly moved the system files in the root of c: and placed them in a new folder. I only have access to a coputer with win xp. <br/>thanks!Try <br/><br/><a href="http://www.bootdisk.com/bootdisk.htm">http://www.bootdisk.com/bootdisk.htm</a><br/><br/>Thanks! i got the boot disk and know I get a command line...how do I get windows to start up again?<br/>You can try typing "sys c:" at the command prompt. This should put the system files back and hopefully you can boot to the hard drive again.<br/><br/>Exactly what files did you move off of the root of c: to another folder?<br/><br/>GaryHi, I have managed to get into the directory where I put all the lose files on the root of the c: drive and transfer the majority over back to c:. the problem now is getting the hidden files over. I made the folloowing command:<br/>attrib -h *.* and 8 files came up including msdos.sys and io.sys but i don't know how to move these to c:<br/>Can you help?<br/>Cheers, LedaThat's what sys c: does. It creates those files where you tell it. Now assuming your boot disk is the same as your OS then you should have no problems once you do that.<br/><br/>GaryHi Gary,<br/>It looking better, i actually get to see the windows 98 screen come up but it won't completely open, not even is safe mode. I get "an internal stack overflow has cused this session to be halted. <a href="https://interviewquestions.tuteehub.com/tag/change-238106" style="font-weight:bold;" target="_blank" title="Click to know more about CHANGE">CHANGE</a> the stacks getting in your CONFIG.SYS file, and then try again. Of course I do not have win 98 disk....<br/>Thanks for your advice,<br/>LedaLeda,<br/><br/>Did you do the "sys c:" after you <a href="https://interviewquestions.tuteehub.com/tag/copied-2017628" style="font-weight:bold;" target="_blank" title="Click to know more about COPIED">COPIED</a> the files back? If so go find your config.sys and autoexec.bat and copy them back again.<br/><br/><a href="https://interviewquestions.tuteehub.com/tag/sure-656539" style="font-weight:bold;" target="_blank" title="Click to know more about SURE">SURE</a> would be easier if you had a 98 disk. You can install 98 (same exact <a href="https://interviewquestions.tuteehub.com/tag/version-1444891" style="font-weight:bold;" target="_blank" title="Click to know more about VERSION">VERSION</a>) directly on top of 98 and not loose any settings, programs, etc. (Well almost nothing), but they need to be the exact same version.<br/><br/>GaryHi again, I am going to do my best to get hold of a 98 disk, it is just that I am far from home on vacation and not sure if I can find a disk here....<br/>When you say copy the files again, you mean from the directory in the c drive where I stupidly placed them? I did this and no luck...or do you mean I shold copy them from the floppy boot disk? If so what command would that be?<br/>Cheers, Leda</p></body></html> | |
| 53. |
Solve : win98 or win95 for an old PC?? |
| Answer» <html><body><p>What OS would you install in a pentium 233 MHZ, 32 meg RAM and 2 Gig HD?<br/>Windows 95 or 98?. I thnk I could install w98 and then use IEradicator to get <a href="https://interviewquestions.tuteehub.com/tag/rid-623653" style="font-weight:bold;" target="_blank" title="Click to know more about RID">RID</a> of Internet Explorer and related files, I don´t need them.<br/>ThanksWin98SE. Leave <a href="https://interviewquestions.tuteehub.com/tag/ie-496825" style="font-weight:bold;" target="_blank" title="Click to know more about IE">IE</a>, it's needed for Windows Update. If you don't like IE, don't use it.<br/><br/>BTW, Win98, MS Office, antivirus, firewall, etc., take about 1.5GB. 2GB is enough.<br/><br/>Another 32MB of <a href="https://interviewquestions.tuteehub.com/tag/memory-11894" style="font-weight:bold;" target="_blank" title="Click to know more about MEMORY">MEMORY</a> will help a lot.<br/><br/><a href="https://support.microsoft.com/default.aspx?scid=kb;en-us;182751">http://support.microsoft.com/default.aspx?scid=kb;en-us;182751</a>I am running a AMD based pc with a 2 gig harddrive I am using IE Explorer,running internet,basic install screensavers that 98 se has calculator etc. no firewall or virus protection tho and I have 1.71 freespace after basic install and a small Disney drawing <a href="https://interviewquestions.tuteehub.com/tag/program-246414" style="font-weight:bold;" target="_blank" title="Click to know more about PROGRAM">PROGRAM</a> (3 year old in house)and 32 meg of ram with Softram running</p></body></html> | |
| 54. |
Solve : Win 98 dos Setup for the experts? |
| Answer» <html><body><p>Okay here it is... My fiance and i got here old comp back from her <a href="https://interviewquestions.tuteehub.com/tag/mothers-564751" style="font-weight:bold;" target="_blank" title="Click to know more about MOTHERS">MOTHERS</a> place and it was bogged down. It to like <a href="https://interviewquestions.tuteehub.com/tag/5-237653" style="font-weight:bold;" target="_blank" title="Click to know more about 5">5</a> mins to <a href="https://interviewquestions.tuteehub.com/tag/open-245076" style="font-weight:bold;" target="_blank" title="Click to know more about OPEN">OPEN</a> my comp. I spent day making it run faster. I got about a 50%increase of speed. But other problems came up so we decieded to wipe everything and start over. <br/>So i fdisked and formated my 2 drives to look like this<br/><br/><br/><br/>1) C: Pri Dos | 4918 MB | Fat32 | 100%<br/> <br/>2) D: Pri Dos | 4863 MB | Fat32 | 50%<br/> E: Ext Dos | 4897 MB | Fat32 | 50%<br/><br/>Did i do this right, i want windows to be on C: .<br/> So then im in dos with cdrom support and i get into F:\ drive.(Cdrom) Then as follows<br/>F:\>setup ---i hit enter---<br/>---Blank line left--- Hangs for a second<br/>F:\> ---then returns me here again.<br/><br/>I am stumped with this way.<br/>So another rout i took was entering 1 on the Start up menu(used boot disk) "Start windows 98 Setup from CD-ROM"<br/>It then loads all of the drivers. Then i get the message:<br/>"The Windows 98 Setup files were not found"<br/><br/>This is a brand new cd. and when i plug it into my XP comp, i can see the setup files; whats going on? Is there anotherway around thes problems?<br/>Thanks for reading and helping me.<br/>Mat<br/><br/>One more problem, when i boot my comp up, my memory test keeps on looping how do i fix this.<br/><br/>Specs. its all old but good stuff at one point!! <br/>ASUS P2L97 mother board<br/>ASUS AGP-V3000 video<br/>768 MB of SDRAM<br/>Fujitsu and Caviar35100 harddrives<br/>BIOS 1.51<br/>If any other info is need just ask.Can anyone help out here??? It's been awhile since I setup a Win 98 system, but if it's having trouble finding the files on the cd try running setup from the f:\win98 instead of from the root directory.<br/><br/>Good Luck, keep us posted<br/>i tried that already as well i just forgot to post it in the original message. but thanks for trying to help. if anyone else knows, plzzzzzzzz let me know.It's been a long time, but Win98 as I remember has to be installed on the first partition of the first drive. (your C: drive in this case). Has the partition been marked as active and why do you have two primary partitions? Unless your're <a href="https://interviewquestions.tuteehub.com/tag/planning-15176" style="font-weight:bold;" target="_blank" title="Click to know more about PLANNING">PLANNING</a> on a dual boot system, I would suggest you allocate the second drive as extended and then build logical partiitions.<br/><br/>Good luck. It appears your computer can see your CD drive as F: but your CD doesn't appear to be reading CD's<br/><br/>Try typing F:\ Dir<br/><br/>This will list the directory of files on the CD if it is reading properly - if not it will return with a cannot read directory message<br/><br/>first the second was to be used to install win xp, then i did some research on it and it won't be compatable. Like you said about the partitions, i did exactly that last night. Thanks for the <a href="https://interviewquestions.tuteehub.com/tag/advice-768624" style="font-weight:bold;" target="_blank" title="Click to know more about ADVICE">ADVICE</a> anyway. <br/><br/>When i type F:>dir i get to see all files and i can open some of them like normal. yet whe i typ setup, nothing.... but thank you for trying, any other idea I WILL try. any thing.Hi try to use another CD ROM or CD Driveproblem solved... i got another cd drive from a friend for dirt cheap and all is fine now, i guess my old one was sH.. thank you all for your help. oh ya i also contacted microsoft about this issue, and they also recomended to replace my cd drive... for others information. once again thank you all for trying to help me.</p></body></html> | |
| 55. |
Solve : Upgrading from win98 to XP. Errors!!!!!? |
| Answer» <html><body><p>I've tried to upgrade 10 times now. Fails everytime. Always for different reasons, different files it says are corrupt or it can't copy them but the FATAL ERROR: is always the same:<br/><br/><br/>Error:<br/>Installation failed: <a href="https://interviewquestions.tuteehub.com/tag/c-3540" style="font-weight:bold;" target="_blank" title="Click to know more about C">C</a>:\$WIN_NT$.~LS\i386\asms.<br/><br/>Error message: A component's file does not match the verification information present in the component manifest.<br/><br/>It's starting to upset me a little. I've spent hours and hours on the phone talking to MS Help (Indian) (no offense, really, but they are kind of hard for me to understand) with no results. It seems like everything is going good, but apparently there's just 1 little file somewhere that doesn't look right so the whole thing crashes. <br/>What is a manifest anyway, and does anybody out there know how to fix this? From <a href="https://interviewquestions.tuteehub.com/tag/looking-1079184" style="font-weight:bold;" target="_blank" title="Click to know more about LOOKING">LOOKING</a> around different places on the internet I see I'm not the only one having this problem, but so far I haven't found any answers. Please HELP!!!!!<br/>Thanxhave you tried wiping the <a href="https://interviewquestions.tuteehub.com/tag/drive-959713" style="font-weight:bold;" target="_blank" title="Click to know more about DRIVE">DRIVE</a> and doing a clean install?Okay,firstly,is this a new xp cd or a copy?Is it a full install or upgrade?What is your hardware?(harddrive size,size of ram,processor speed)XP needs sufficient hard disk space and needs at least 256mb of ram to run at its potential.If you have the required H/D space and ram and it is a full install cd then fdisk your h/d and then format and then install xp.Why dont you tell <a href="https://interviewquestions.tuteehub.com/tag/us-243201" style="font-weight:bold;" target="_blank" title="Click to know more about US">US</a> your specs and the xp disc first and we will go from there!I have a brand new full install XP cd. Not a copy. Don't think Microsoft would have been talking to me if it were a copy. But, I'm using it to (try) to upgrade from win98se. Which you're sposed to be able to do??? I know you can partition with fdisk (although I've never done it) but my understanding is that doing that wipes out everything. <br/><br/>Specs: (Sorry I didn't give this to <a href="https://interviewquestions.tuteehub.com/tag/start-239994" style="font-weight:bold;" target="_blank" title="Click to know more about START">START</a> with) <br/><br/>80 GB hard drive (no partitions, win98se)<br/>Intel Celeron, 399mghz<br/>128 MB RAM<br/><br/>Ok, so it's not the greatest, but it should suffice. Anyway, if you got any ideas, please let me know. Thanx XPEER.....Looking at you pc specs.........XP should run , but your CPU is a little slow and 128mb ram is also questionable .<br/>Have a read ...<br/><a href="http://pcworld.about.com/magazine/2003p152id78043.htm">http://pcworld.about.com/magazine/2003p152id78043.htm</a><br/><br/>There may be one (ore more missing files in your 98SE) that is causing the problems .......Really a clean install ...would probably solve that ..........In other words... Format the existing hard drive ......( wipe it clean) Then use the Win 98 boot disk to reboot , FDISK the hard drive to creat a partition and then do a clean install of XP .........Remember you must save any data you want to cd before formatting ......<br/><br/>Then as a matter of good practice ......<br/>Do this .....<br/>Install win xp and SP1 ( if its on the cd) <br/>If you have a cd with SP2 , install it next .<br/>Install your anti-virus software .<br/>Now go on line and get the latest updates for your anti virus software ......<br/>Next go to Ms update page and download all updates ....critical and other ...as well as any drivers listed there .<br/>Then ,I would install your spyware and adware scanners .......<br/>Now you should create your E mail account .....in Outlook express ( if thats what you use ) <br/>Now your ready to start installing your programs. <br/><br/><br/>let us know how you make out .<br/><br/>dl65 <br/><br/></p></body></html> | |
| 56. |
Solve : Windows98SE Network? |
| Answer» <html><body><p>I have a peer to peer Windows 98 SE LAN. I can<br/>ping a <a href="https://interviewquestions.tuteehub.com/tag/certain-407894" style="font-weight:bold;" target="_blank" title="Click to know more about CERTAIN">CERTAIN</a> pc and get a good reply; also, I can<br/>start Network Neighborhood and see the workstation,<br/>as well as use Find <a href="https://interviewquestions.tuteehub.com/tag/computer-243299" style="font-weight:bold;" target="_blank" title="Click to know more about COMPUTER">COMPUTER</a>, and see it.<br/><br/>However, <a href="https://interviewquestions.tuteehub.com/tag/whenever-2331622" style="font-weight:bold;" target="_blank" title="Click to know more about WHENEVER">WHENEVER</a> I try to double-click to access<br/>shared files, I get message "<a href="https://interviewquestions.tuteehub.com/tag/name-237998" style="font-weight:bold;" target="_blank" title="Click to know more about NAME">NAME</a> is not accessible,<br/>this device does not exist on network". <br/><br/>Any <a href="https://interviewquestions.tuteehub.com/tag/suggestions-1233853" style="font-weight:bold;" target="_blank" title="Click to know more about SUGGESTIONS">SUGGESTIONS</a>,<br/>thanks</p></body></html> | |
| 57. |
Solve : ctrl+alt+del can't reboot in windows 98? |
| Answer» <html><body><p>Hi,<br/><br/>In win95/98, I follow this thread to <a href="https://interviewquestions.tuteehub.com/tag/replace-karana-ka-sharatakata-622250" style="font-weight:bold;" target="_blank" title="Click to know more about REPLACE">REPLACE</a> the alt+ctrl+del to reboot <a href="https://interviewquestions.tuteehub.com/tag/instead-248606" style="font-weight:bold;" target="_blank" title="Click to know more about INSTEAD">INSTEAD</a> of show the <a href="https://interviewquestions.tuteehub.com/tag/task-243523" style="font-weight:bold;" target="_blank" title="Click to know more about TASK">TASK</a> list menu but it doesn't work.<br/><br/><a href="http://www.winguides.com/registry/display.php/1000/">http://www.winguides.com/registry/display.php/1000/</a><br/><br/>Any idea?<br/><br/><a href="https://interviewquestions.tuteehub.com/tag/regards-1182031" style="font-weight:bold;" target="_blank" title="Click to know more about REGARDS">REGARDS</a>.</p></body></html> | |
| 58. |
Solve : NEED HELP INSTALLING WINDOWS 98...THANKS? |
| Answer» <html><body><p>hi.. k i had windows xp on my <a href="https://interviewquestions.tuteehub.com/tag/computer-243299" style="font-weight:bold;" target="_blank" title="Click to know more about COMPUTER">COMPUTER</a>..i deleted it and i wanted to install windows 98...k the problem is i have no operation system on my comp right now and i cant install windows 98...<a href="https://interviewquestions.tuteehub.com/tag/umm-717122" style="font-weight:bold;" target="_blank" title="Click to know more about UMM">UMM</a> soo could someone pllzzzzzzzzzzzz help mee..i would appreciate it...thanks<br/><br/>-chrissYou should be able to install it from DOS, right?<br/><br/>[glb]Flame[/glb]You need a WIN 98 boot floppy disk or a WIN 98 boot cd (as I know, there is no WIN 98 boot cd; you need a WIN 98 boot floppy disk). Reformat <a href="https://interviewquestions.tuteehub.com/tag/c-3540" style="font-weight:bold;" target="_blank" title="Click to know more about C">C</a>: partition (FAT 32 this time, not NTFS). Insert cd and <a href="https://interviewquestions.tuteehub.com/tag/launch-246614" style="font-weight:bold;" target="_blank" title="Click to know more about LAUNCH">LAUNCH</a> setup from cd.</p></body></html> | |
| 59. |
Solve : Windows 98 Crashes to black screen after login.? |
| Answer» <html><body><p>So to start off. Its a windows 98 pc with a Pentium 3 processor. With a 6gb <a href="https://interviewquestions.tuteehub.com/tag/ide-496683" style="font-weight:bold;" target="_blank" title="Click to know more about IDE">IDE</a> hard <a href="https://interviewquestions.tuteehub.com/tag/drive-959713" style="font-weight:bold;" target="_blank" title="Click to know more about DRIVE">DRIVE</a>. I got the <a href="https://interviewquestions.tuteehub.com/tag/computer-243299" style="font-weight:bold;" target="_blank" title="Click to know more about COMPUTER">COMPUTER</a> with a sticker that described the issue on the case. I decided to reinstall windows 98 thinking it was just a corrupted install. I <a href="https://interviewquestions.tuteehub.com/tag/formatted-7300131" style="font-weight:bold;" target="_blank" title="Click to know more about FORMATTED">FORMATTED</a> and reinstalled windows 98 without any issues. I created a password and logged in. It was about to go to the desktop after installing some drivers. As <a href="https://interviewquestions.tuteehub.com/tag/soon-1722172" style="font-weight:bold;" target="_blank" title="Click to know more about SOON">SOON</a> as a windows pops up which you can pause to see in the video. It crashes to a black screen as the CD drive spins down. The power buttons are unresponsive. It turns on again if I unplug it and plug it back in. I have tried unplugging all the hardware except the hard drive. IT WILL BOOT INTO SAFE MODE PERFECTLY I do not have any other IDE hard drive to test it to see if its a hard drive. Here is a video displaying the issue.Windows 98 Crashes to black screen after login.<br/><br/><a href="https://youtu.be/dOlsHbhZALQ">https://youtu.be/dOlsHbhZALQ</a>I'd be looking at some of the ideas presented in the topic below.<br/><br/>Troubleshooting Windows 98 Startup Problems <br/><br/><a href="https://support.microsoft.com/en-us/kb/188867">https://support.microsoft.com/en-us/kb/188867</a><br/></p></body></html> | |
| 60. |
Solve : 3.1 OS install question/s.? |
| Answer» <html><body><p>I have an old Dell 3000 M266XT that I can put to use, but need to find the 3.1 O.S. on floppy disks or CD if there is such a thing. I want to do a fresh install from 3.1 up to Windows 98 using 95 Upgrade and then to 98 Upgrade only because I have both Upgrades 95 and 98. Ultimately I want to end with 98 SE if I can find a copy of that. I <a href="https://interviewquestions.tuteehub.com/tag/found-458144" style="font-weight:bold;" target="_blank" title="Click to know more about FOUND">FOUND</a> a few sites that claim they have 3.1 OS in zip form but not having any luck <a href="https://interviewquestions.tuteehub.com/tag/loading-1076696" style="font-weight:bold;" target="_blank" title="Click to know more about LOADING">LOADING</a> to floppies ones files are extracted. Any <a href="https://interviewquestions.tuteehub.com/tag/help-239643" style="font-weight:bold;" target="_blank" title="Click to know more about HELP">HELP</a> would be appreciated. My reason for the 3.1 is because that is what was on the laptop HDD when it was given to me and I just bought the 95 upgrade and then the 98 upgrade after that...so no full versions of anything. except XP and Vista. I loaded XP on it but boy was it a dog. <br/><br/>The laptop has both cd drive and a floppy drive, and has the highest I can go with memory, I think, and I believe I have a decent size HDD as well which I bought new for a replacement about a <a href="https://interviewquestions.tuteehub.com/tag/decade-945561" style="font-weight:bold;" target="_blank" title="Click to know more about DECADE">DECADE</a> ago and it is ready for a fresh install of whatever. <br/><br/><br/>You won't need to load all those different versions of windows to get the win98. If you boot from a floppy with cd drivers you can download a disk image from here.<br/><br/><a href="http://bootdisk.com/bootdisk.htm">http://bootdisk.com/bootdisk.htm</a><br/><br/>And then run setup from the win98 cd or if on floppy disk, boot from the first disk and install Windows 98. <br/><br/>With there being limited support for internet and hardware under Win98 perhaps a install of Puppy linux would be worth considering.<br/>Thanks so much for the info...I'm sure it will be challenging to find the drivers I would need but It'll be fun <a href="https://interviewquestions.tuteehub.com/tag/looking-1079184" style="font-weight:bold;" target="_blank" title="Click to know more about LOOKING">LOOKING</a>.<br/></p></body></html> | |
| 61. |
Solve : Floppy drive missing in windows 98? |
| Answer» <html><body><p>Floppy drive is missing under windows 98 regular mode. The floppy controller is listed under device manager but no floppy drive is under "my <a href="https://interviewquestions.tuteehub.com/tag/computer-243299" style="font-weight:bold;" target="_blank" title="Click to know more about COMPUTER">COMPUTER</a>". In safe mode the floppy drive is listed and works fine. Dos boot it works fine, just not in regular windows mode. Any suggestions anyone?Try reinstalling your drivers by going to the device manager, find the drive, right-click on it, and hit update drivers.... (Make sure that you are connected to the internet whe you do this)<br/><br/>[glb]Flame[/glb]The floppy is not listed in device manager list in regular mode. In safe mode it is listed however no <a href="https://interviewquestions.tuteehub.com/tag/dialup-7675154" style="font-weight:bold;" target="_blank" title="Click to know more about DIALUP">DIALUP</a> is available. I did delete it in safemode, and it only returns in safemode.Download TweakUI (<a href="https://interviewquestions.tuteehub.com/tag/free-240724" style="font-weight:bold;" target="_blank" title="Click to know more about FREE">FREE</a> from Microsoft)<br/><a href="https://www.microsoft.com/ntworkstation/downloads/PowerToys/Networking/NTTweakUI.asp">http://www.microsoft.com/ntworkstation/downloads/PowerToys/Networking/NTTweakUI.asp</a><br/>Run TweakUI and <a href="https://interviewquestions.tuteehub.com/tag/check-25817" style="font-weight:bold;" target="_blank" title="Click to know more about CHECK">CHECK</a> box under My Computer <a href="https://interviewquestions.tuteehub.com/tag/tab-25634" style="font-weight:bold;" target="_blank" title="Click to know more about TAB">TAB</a>.</p></body></html> | |
| 62. |
Solve : Windows 98 SE, LU 1835; Windows Audit Mode? |
| Answer» <html><body><p>Hello:<br/>I hope someone can <a href="https://interviewquestions.tuteehub.com/tag/help-239643" style="font-weight:bold;" target="_blank" title="Click to know more about HELP">HELP</a> me with this problem. I'm at my wits end. I have Win 98 SE and Norton Internet <a href="https://interviewquestions.tuteehub.com/tag/security-11642" style="font-weight:bold;" target="_blank" title="Click to know more about SECURITY">SECURITY</a> Professional 2004 (subscript up at end of year). When I run Live Update I receive LU 1835: Connection to Live Update Server <a href="https://interviewquestions.tuteehub.com/tag/failed-2080748" style="font-weight:bold;" target="_blank" title="Click to know more about FAILED">FAILED</a>. I am then directed to the symantec support site. The site does an analysis of my system. It finds that Windows is running on Audit Mode. It advises going into the registry to delete that key. The problem? I can't find anything that says audit mode, and further, there's also a <a href="https://interviewquestions.tuteehub.com/tag/solution-25781" style="font-weight:bold;" target="_blank" title="Click to know more about SOLUTION">SOLUTION</a> of changing the time of Live Update <br/><br/>I've been unable to complete a Live Update session for at <a href="https://interviewquestions.tuteehub.com/tag/least-1070759" style="font-weight:bold;" target="_blank" title="Click to know more about LEAST">LEAST</a> two/three weeks. <br/>Please Help!</p></body></html> | |
| 63. |
Solve : Diagnostics to test HD on Win98se? |
| Answer» <html><body><p>Hi All and thanks for the help today. I <a href="https://interviewquestions.tuteehub.com/tag/need-25476" style="font-weight:bold;" target="_blank" title="Click to know more about NEED">NEED</a> to <a href="https://interviewquestions.tuteehub.com/tag/run-1192138" style="font-weight:bold;" target="_blank" title="Click to know more about RUN">RUN</a> diagnostics - read scan for errors, <a href="https://interviewquestions.tuteehub.com/tag/etc-251218" style="font-weight:bold;" target="_blank" title="Click to know more about ETC">ETC</a> on a HD in Win98se. Is there a built in <a href="https://interviewquestions.tuteehub.com/tag/program-246414" style="font-weight:bold;" target="_blank" title="Click to know more about PROGRAM">PROGRAM</a> to do that?<br/>Thanks again.go to start, programs, accessories,syatem <a href="https://interviewquestions.tuteehub.com/tag/information-238790" style="font-weight:bold;" target="_blank" title="Click to know more about INFORMATION">INFORMATION</a>, that will open up help & support, from there go to tools and open up file checker and scan you computer for missing files, if you need a file it will ask you to put win 98 in you cd to replace your missing file.<br/>it works for me best of luck.</p></body></html> | |
| 64. |
Solve : win98 dials-up on its own !? |
| Answer» <html><body><p>my computer dials up after boot now<br/>think some downloaded spyware doin it as was ok once<br/><br/>can this be overcome please and go back to dialling when i say so ?<br/><br/>taNot just Spyware, but it COULD be a virus... Where is it dialing to? Do you have antivirus software?<br/><br/>[glb]Flame[/glb]Thankyou for taking the trouble to answer Flame.<br/><br/>Got AVG anti virus and <a href="https://interviewquestions.tuteehub.com/tag/sygate" style="font-weight:bold;" target="_blank" title="Click to know more about SYGATE">SYGATE</a> firewall<br/><br/>It <a href="https://interviewquestions.tuteehub.com/tag/rings-771396" style="font-weight:bold;" target="_blank" title="Click to know more about RINGS">RINGS</a> my dial up number, but when connected trys to contact somewhere from a <a href="https://interviewquestions.tuteehub.com/tag/purported-7703982" style="font-weight:bold;" target="_blank" title="Click to know more about PURPORTED">PURPORTED</a> firewall i down loaded.<br/><br/>I dont know how to adjust which programs run at start up.<br/><br/>Thankx anyway.Well.... As <a href="https://interviewquestions.tuteehub.com/tag/far-459491" style="font-weight:bold;" target="_blank" title="Click to know more about FAR">FAR</a> as certain programs <a href="https://interviewquestions.tuteehub.com/tag/running-1192206" style="font-weight:bold;" target="_blank" title="Click to know more about RUNNING">RUNNING</a> at startup, I have a software program for that.... If you are interested, you can download it from me... Also, what internet browser are you using?<br/><br/>[glb]Flame[/glb]Sorry for not explaining earlier.... What I mean by the web browser, is... What web browser is trying to dial out? (AOL, MSN, etc.)<br/><br/>[glb]Flame[/glb]</p></body></html> | |
| 65. |
Solve : MS-DOS - WIN98 - CD/DVD recognition? |
| Answer» <html><body><p>Son crashed his T22 :-/<br/><br/>However, he has lost all his product software - and previously installed W2000. When he installed the W2000 he deleted all his Think Pad Hot Keys.<br/><br/>We are having to rebuild the <a href="https://interviewquestions.tuteehub.com/tag/system-238321" style="font-weight:bold;" target="_blank" title="Click to know more about SYSTEM">SYSTEM</a>. IBM says they no longer support W98.<br/><br/>We obtained a W98 Statup Disk, and did an FDISK and did a FORMAT c: /s. <br/><br/>It installed the autoexe, etc. in a D: drive. Now when we boot - we go to the c: dos prompt.<br/><br/>The computer does not recognize the CD/DVD Rom drive. We have the ROM driver on floppy - but we do not know how we can get the computer to recognize the CD/DVD Rom drive to use the Win 98 CD to get the computer up and running.<br/><br/>Any suggestions?<br/><br/>Thank you,<br/>AZ RattlerW98 was the original operating system.<br/><br/>DeeDee Smith - AZ RattlerHi,<br/><br/>When you formatted the c: drive with the /s switch you made the hard drive bootable. Try formatting the c: drive without any switches. When that completes, <a href="https://interviewquestions.tuteehub.com/tag/put-11868" style="font-weight:bold;" target="_blank" title="Click to know more about PUT">PUT</a> the Win98 disk in the CD drive and boot the system.<br/><br/>If that doesn't work, go into "setup" (there should be an <a href="https://interviewquestions.tuteehub.com/tag/indicator-1041513" style="font-weight:bold;" target="_blank" title="Click to know more about INDICATOR">INDICATOR</a> during boot as to which key to hit to enter setup) and change the order of the boot process, so that the first device it <a href="https://interviewquestions.tuteehub.com/tag/checks-914749" style="font-weight:bold;" target="_blank" title="Click to know more about CHECKS">CHECKS</a> is the CD.<br/><br/>Good luck and <a href="https://interviewquestions.tuteehub.com/tag/let-11597" style="font-weight:bold;" target="_blank" title="Click to know more about LET">LET</a> us know how you make out.<br/><br/></p></body></html> | |
| 66. |
Solve : Windows 98SE update problem? |
| Answer» <html><body><p>When I try to update my computer, right beore it is about to scan for updates, it gives me <a href="https://interviewquestions.tuteehub.com/tag/error-25548" style="font-weight:bold;" target="_blank" title="Click to know more about ERROR">ERROR</a> code 0x80090350. I googled this and only found people with the same problem as me. Is the Windows Update connection encrypted? Since the computer I am <a href="https://interviewquestions.tuteehub.com/tag/updating-250800" style="font-weight:bold;" target="_blank" title="Click to know more about UPDATING">UPDATING</a> from is connected to the internet with a wireless adapter, encrypted data connections that sites have (such as amazon) <a href="https://interviewquestions.tuteehub.com/tag/never-570518" style="font-weight:bold;" target="_blank" title="Click to know more about NEVER">NEVER</a> works. Windows Update works on my computer where it is directly connected to the router. I <a href="https://interviewquestions.tuteehub.com/tag/figure-248565" style="font-weight:bold;" target="_blank" title="Click to know more about FIGURE">FIGURE</a> this is the problem, but can someone at least tell me what this error code means? I went to the microsoft "Windows Update" community newsgroup and they never answer. Someone please help, I think my computer is missing quite a few updates.I'm not an expert but make sure you have the software for your wifi network installed correctly . . . make sure the correct drivers are thier and if there is an interface to tcp-ip make sure wifi or 802.11 is specified. Also try looking at ssl. ssl is a tcp-ip protocol that enables <a href="https://interviewquestions.tuteehub.com/tag/secure-630237" style="font-weight:bold;" target="_blank" title="Click to know more about SECURE">SECURE</a> transmition. . . i would update the browser to ie 6 which would have up to date ssl then connect through your wifi. Okay, thanks. I'll see if it works, thanks for the help.</p></body></html> | |
| 67. |
Solve : HP Deskjet 600c - Windows 98 SE? |
| Answer» <html><body><p>I have Windows 98 SE. I'm trying to install a HP Deskjet 600c printer. When it asks for the <a href="https://interviewquestions.tuteehub.com/tag/disk-244471" style="font-weight:bold;" target="_blank" title="Click to know more about DISK">DISK</a>, it gives me an error stating that I'm missing these files:<br/><br/>dmcolor.dll<br/>finstall.dll<br/>icon.lib<br/>unidrv.dll<br/>hpdskjtb.drv<br/><br/>Suggestions on what to do??? I've tried downloading and selecting the file, still get error. <a href="https://interviewquestions.tuteehub.com/tag/thanks-665909" style="font-weight:bold;" target="_blank" title="Click to know more about THANKS">THANKS</a> for any help.<br/><br/>Sarah Quote</p><blockquote>I have Windows 98 SE. I'm trying to install a HP Deskjet 600c printer. When it asks for the disk, it gives me an error stating that I'm missing these files:<br/><br/>dmcolor.dll<br/>finstall.dll<br/>icon.lib<br/>unidrv.dll<br/>hpdskjtb.drv<br/><br/>Suggestions on what to do??? I've tried downloading and selecting the file, still get error. Thanks for any help.<br/><br/>Sarah</blockquote> <br/><br/>Which disk is it asking for: Win98SE or HP600c?<br/>Win98SEWin98 is not very <a href="https://interviewquestions.tuteehub.com/tag/good-1009017" style="font-weight:bold;" target="_blank" title="Click to know more about GOOD">GOOD</a> at finding the files it <a href="https://interviewquestions.tuteehub.com/tag/needs-1112903" style="font-weight:bold;" target="_blank" title="Click to know more about NEEDS">NEEDS</a>. When it asks for Win98 CD, browse to Win98 subdirectory on CD. Then continue.crazy printers hp?? remove the printer from the device manager......and disconnect it from the pc....now reboot......remove the hp software and re-boot........now load the software.....plug in the hp printer and turn it on......<a href="https://interviewquestions.tuteehub.com/tag/runs-246860" style="font-weight:bold;" target="_blank" title="Click to know more about RUNS">RUNS</a> ok now yes!!</body></html> | |
| 68. |
Solve : Do I need to reformat before I reload windows 98? |
| Answer» <html><body><p>I want to reload my windows 98 and start my <a href="https://interviewquestions.tuteehub.com/tag/computer-243299" style="font-weight:bold;" target="_blank" title="Click to know more about COMPUTER">COMPUTER</a> fresh. Do I just reload the disk or do I <a href="https://interviewquestions.tuteehub.com/tag/need-25476" style="font-weight:bold;" target="_blank" title="Click to know more about NEED">NEED</a> to go into DOS and reformat my hard drive before I reload. I have 2 friends that both tell me different things. I just want to wipe my system totally clean and start over.tenabell......If you want to start out fresh ........format your hard drive ......That will remove all data and operating system . Then you will install Window 98 and away you go.......You will need a window 98 boot disk....( you probably already have one) ......<br/><br/>dl65 The directions that my <a href="https://interviewquestions.tuteehub.com/tag/friend-458332" style="font-weight:bold;" target="_blank" title="Click to know more about FRIEND">FRIEND</a> sent me on how to reformat has me making a boot disk as the first step. If I do not reformat and just reload windows will it wipe my computer clean or just cover it up? I have <a href="https://interviewquestions.tuteehub.com/tag/4-238406" style="font-weight:bold;" target="_blank" title="Click to know more about 4">4</a> years of crap on here and I don't know what <a href="https://interviewquestions.tuteehub.com/tag/needs-1112903" style="font-weight:bold;" target="_blank" title="Click to know more about NEEDS">NEEDS</a> to go or needs to stay but I have almost filled my poor lil computer to its max.tenabell...I always like to start clean when doing a format as opposed to just reinstalling. If you are going to do a clean install......remember to copy anthing you dont want to lose onto a cd .......things like your address book ( called WAB ) family pics ..that sort of thing .....remember you will have to reinstall all your software....so make sure you have it handy.......<br/>Remember to copy the settings for your dial up connection as well as the settings for your Email account settings.<br/><a href="http://www.putergeek.com/win98_install/index.shtml">http://www.putergeek.com/win98_install/index.shtml</a><br/><br/>dl65 You will need things such as your graphics card driver disks etc and Windows Serial Key handy.Make sure you have all of your drivers and such.... Otherwise, you are in TROUBLE. You know how to reformat, right?<br/><br/>[glb]Flame[/glb]What make of the pc is this??and you are correct two many cooks spoil the broth?</p></body></html> | |
| 69. |
Solve : Win 98SE, 'Send To Desktop' fails to work? |
| Answer» <html><body><p>Over Xmas I upgraded from Win98 to Win98SE with a complete disk-wipe and one-at-a-time install of my hardware devices.<br/>Sometime during the re-loading of my programs I noticed that the <a href="https://interviewquestions.tuteehub.com/tag/explorer-455219" style="font-weight:bold;" target="_blank" title="Click to know more about EXPLORER">EXPLORER</a> right-click: '<a href="https://interviewquestions.tuteehub.com/tag/send-630341" style="font-weight:bold;" target="_blank" title="Click to know more about SEND">SEND</a> To Desktop (create shortcut)' option was failing with the message "no CMC Mailer installed".<br/>I tried copying the shortcut-link from my laptop (Win98SE) - this does not produce an error report, but it doesn't work either.<br/>This condition may have been caused by the Win95 'Send To' Powertoys, (I use 'send to any folder'),but removing them has had no effect on the fault.<br/>Does anyone have any ideas please ?<br/>Try running a Windows Update by going to <a href="https://www.microsoft.com">http://www.microsoft.com</a> ... This MIGHT solve your problem.... Keep us posted...<br/><br/>[glb]Flame[/glb]Thanks for the suggestion Flame, unfortunately I do not have internet access at home.<br/>My internet access at work is via a Windows NT machine and the MS Windows Update Site tests which operating system is calling and offers to update only that one.<br/>The 'Send To Desktop (create shortcut)' option did work when I first installed Win98SE and it does work on my Win98SE laptop - it's just that sometime during the <a href="https://interviewquestions.tuteehub.com/tag/process-11618" style="font-weight:bold;" target="_blank" title="Click to know more about PROCESS">PROCESS</a> of adding my <a href="https://interviewquestions.tuteehub.com/tag/software-25575" style="font-weight:bold;" target="_blank" title="Click to know more about SOFTWARE">SOFTWARE</a> it got trashed.<br/>I had thought of using the 'repair' option on the OS, but I'm bothered that I might lose my settings and that I will be forced to reload all my programs again.The repair option does not normally change any program settings except for windows defaults. If you don't want to use it, open windows explorer and navigate to the folder "send to". You can add or delete anything you want by creating a shortcut in this folder. It is located at c:\windows\send to.Hi 2k dummy,<br/><br/>I know how to add items to the "send to" folder, with the exception of sending to the desktop. If I could do this then I could just replace the missing shortcut.<br/><br/>I've tried drag-and-drop from both the desktop window and the desktop folder, both refuse to create a shortcut.<br/><br/>I've tried a comparison search through my laptop and desktop registers without finding any relevant difference.<br/>You should find a Desktop folder in your Windows folder. Try looking in the folder or in the Start Menu folder in Windows. Your actual Desktop is just an illusion... its contents are stored somewhere in the Windows folder.Hello to all,<br/><br/>Over the <a href="https://interviewquestions.tuteehub.com/tag/weekend-1451233" style="font-weight:bold;" target="_blank" title="Click to know more about WEEKEND">WEEKEND</a> I cross-referenced my desktop's Registry with my laptop's.<br/>I discovered that a CLSID entry linked to 'deskfile' had somehow been deleted from my Registry, re-creating this cured the problem.<br/><br/>Thanks for you replies.</p></body></html> | |
| 70. |
Solve : old 98se cd? |
| Answer» <html><body><p>hello everybody i have an old 98 cd that has ie5 on it and not ie6 and all the <a href="https://interviewquestions.tuteehub.com/tag/patches-1148823" style="font-weight:bold;" target="_blank" title="Click to know more about PATCHES">PATCHES</a> either i <a href="https://interviewquestions.tuteehub.com/tag/guess-1013936" style="font-weight:bold;" target="_blank" title="Click to know more about GUESS">GUESS</a> my question is did microsoft come out with a service pack cd like they did with xp when they went <a href="https://interviewquestions.tuteehub.com/tag/fron-1000765" style="font-weight:bold;" target="_blank" title="Click to know more about FRON">FRON</a> sp1 to sp2 to <a href="https://interviewquestions.tuteehub.com/tag/update-718077" style="font-weight:bold;" target="_blank" title="Click to know more about UPDATE">UPDATE</a> your system or can you only get it from the microsoft site only and thank you for the info. hhhhmmmm.... Not sure..... can't you just get the updates from the internet?<br/><br/>[glb]Flame[/glb]yes flame i can get the updates from the microsoft site it just takes so long if your using dial up connection thanks.Click on the following:<br/><a href="http://exuberant.ms11.net/98sesp.html">UNOFFICIAL Windows98 <a href="https://interviewquestions.tuteehub.com/tag/second-238031" style="font-weight:bold;" target="_blank" title="Click to know more about SECOND">SECOND</a> Edition Service Pack 1.6.2 (Freeware)</a>thanks!</p></body></html> | |
| 71. |
Solve : Win98SE always starts in Safe Mode? |
| Answer» <html><body><p>Can anyone help? My PC will only start in Safe Mode... problem arose after <a href="https://interviewquestions.tuteehub.com/tag/loading-1076696" style="font-weight:bold;" target="_blank" title="Click to know more about LOADING">LOADING</a> some software. Through Safe Mode I've been able to delete the software and restore the registry (with scanreg /restore) and there are no conflicts in <a href="https://interviewquestions.tuteehub.com/tag/device-11244" style="font-weight:bold;" target="_blank" title="Click to know more about DEVICE">DEVICE</a> manager... but now every time the <a href="https://interviewquestions.tuteehub.com/tag/computer-243299" style="font-weight:bold;" target="_blank" title="Click to know more about COMPUTER">COMPUTER</a> boots, it restarts itself then enters safe mode. <br/><br/>Any suggestions welcome...Reinstall Win98SE. It won't delete any of your applications or <a href="https://interviewquestions.tuteehub.com/tag/personal-590834" style="font-weight:bold;" target="_blank" title="Click to know more about PERSONAL">PERSONAL</a> files.Hi - yes, tried reinstalling Win98SE again but no joy. The computer crashed just before completing the installation, and comes up with "Windows protection error. Press any key to continue..." and then shuts down. <br/><br/>I'm still able to start up in safe mode, but that's all. So far I've checked for conflicts in control panel/device manager - seems OK - and checked SFC.exe - this states that one file, setupx.dll may be corrupted and suggests re-installing from the installation disk. <br/><br/>However, <a href="https://interviewquestions.tuteehub.com/tag/even-976335" style="font-weight:bold;" target="_blank" title="Click to know more about EVEN">EVEN</a> using the Win98 boot up disk (and ext) to access my Win98 SE CD-ROM, I cannot find the file in the cabinet files of d:\win98 to reinstall the file. Computer says the file does not exist.<br/><br/>Grateful for any ideas anyone can suggest!garysimpson....I was doing a bit of research re your issue and found this ......it seems to apply to yours ...<br/><a href="http://helpdesk.wisc.edu/page.php?cat=1300&id=916">http://helpdesk.wisc.edu/page.php?cat=1300&id=916</a><br/>Have you had any problems with viruses recently ? <br/>let us know......<br/><br/>dl65</p></body></html> | |
| 72. |
Solve : Uninstalling Problem WinXP home on Win98se? |
| Answer» <html><body><p>Hello<br/>On my relatively new <a href="https://interviewquestions.tuteehub.com/tag/pc-590329" style="font-weight:bold;" target="_blank" title="Click to know more about PC">PC</a>, I have recently added XP to my<br/>(wonderfully stable) 98se. I'm overseas and XP is in another language, and now I can't uninstall it anymore.<br/>I have 2 os on the same hdd, and whereas before I could format D (XP), now, I can't access it anymore for some reason, although it is there. Is there a way, preferably w/out 3rd party software, to gain access to the partitioned drive D to <a href="https://interviewquestions.tuteehub.com/tag/reformat-11682" style="font-weight:bold;" target="_blank" title="Click to know more about REFORMAT">REFORMAT</a>, or another way to deinstall XP w/out damaging my 98? Btw, my 98 is FAT 32, my XP is NTFS, 512MB.<br/>I'de be very grateful if somebody out there could help me.<br/> <br/>Well, I for one would not say that having two operating systems is really a <a href="https://interviewquestions.tuteehub.com/tag/good-1009017" style="font-weight:bold;" target="_blank" title="Click to know more about GOOD">GOOD</a> idea..... All it does is eat-up your memory. Who is your computer manufacturer?<br/><br/>[glb]Flame[/glb]You might try FDISK from Win98 and see if you can delete the XP partition. You could also try the Computer Management Disk Manager in XP but I doubt you would be able to delete the currently running OS!<br/><br/>Note: if you do get rid of XP be sure to check the BOOT.INI file on the C: drive and remove any references to <a href="https://interviewquestions.tuteehub.com/tag/booting-772749" style="font-weight:bold;" target="_blank" title="Click to know more about BOOTING">BOOTING</a> a second partition.<br/><br/>Good luck! <a href="https://support.microsoft.com/kb/q303661/">http://support.microsoft.com/kb/q303661/</a> and re-insatll winxp <a href="https://interviewquestions.tuteehub.com/tag/taking-1238585" style="font-weight:bold;" target="_blank" title="Click to know more about TAKING">TAKING</a> note ....that winxp will create partions....chose one drive maybe d(where it will be loaded to).. .......e /f will be your cdrom drive/and cdw drive if it applies!!</p></body></html> | |
| 73. |
Solve : Loading windows 98 SE? |
| Answer» <html><body><p>Fiirst of all, <a href="https://interviewquestions.tuteehub.com/tag/happy-479308" style="font-weight:bold;" target="_blank" title="Click to know more about HAPPY">HAPPY</a> <a href="https://interviewquestions.tuteehub.com/tag/new-1114486" style="font-weight:bold;" target="_blank" title="Click to know more about NEW">NEW</a> <a href="https://interviewquestions.tuteehub.com/tag/year-247323" style="font-weight:bold;" target="_blank" title="Click to know more about YEAR">YEAR</a> to all. I have a gateway 700 computer. I just installed a new seagate 40g hard drive. The old hard drive died, and was 10g. <br/><br/>When I loaded windows <a href="https://interviewquestions.tuteehub.com/tag/98-malyana-ka-rinae-samajhata-para-hasatakashhara-236807" style="font-weight:bold;" target="_blank" title="Click to know more about 98">98</a> SE ( to help avoid with patch and security issues) I got an error message I/O out of bounds or something like that. I can start computer and windows seems to <a href="https://interviewquestions.tuteehub.com/tag/work-20377" style="font-weight:bold;" target="_blank" title="Click to know more about WORK">WORK</a> ok, However, it says I need drivers for pci card and for audio/video.<br/><br/>How come they didn't load from operation back up cd, and is it as simple as finding and loading those drivers,, Please help at witts end, and have been with out home computer for way to long , Thanks for all your help Quote</p><blockquote>...How come they didn't load from operation back up cd, and is it as simple as finding and loading those drivers...</blockquote> <br/>Win98 isn't too good at finding its drivers. When it asks for them, you may have to point it to the exact directory on the CD. How do you know which one this is? Start with \Win98, if it can't find them there, try somewhere else.<a href="http://www.probz.com/win98/">http://www.probz.com/win98/</a></body></html> | |
| 74. |
Solve : direct sound errror? |
| Answer» <html><body><p>i want to <a href="https://interviewquestions.tuteehub.com/tag/play-251439" style="font-weight:bold;" target="_blank" title="Click to know more about PLAY">PLAY</a> a game and appear <a href="https://interviewquestions.tuteehub.com/tag/direct-954477" style="font-weight:bold;" target="_blank" title="Click to know more about DIRECT">DIRECT</a> sound <a href="https://interviewquestions.tuteehub.com/tag/error-25548" style="font-weight:bold;" target="_blank" title="Click to know more about ERROR">ERROR</a>: no driver. what should i do ?</p></body></html> | |
| 75. |
Solve : Quantum Fireball 15 Gbyte ? heads, cylinders, and bytes? |
| Answer» <html><body><p>Can <a href="https://interviewquestions.tuteehub.com/tag/anyone-380251" style="font-weight:bold;" target="_blank" title="Click to know more about ANYONE">ANYONE</a> tell me how <a href="https://interviewquestions.tuteehub.com/tag/many-554478" style="font-weight:bold;" target="_blank" title="Click to know more about MANY">MANY</a> heads, cylinders, and bytes/sector that a Quantum <a href="https://interviewquestions.tuteehub.com/tag/fireball-2643515" style="font-weight:bold;" target="_blank" title="Click to know more about FIREBALL">FIREBALL</a> <a href="https://interviewquestions.tuteehub.com/tag/15-237501" style="font-weight:bold;" target="_blank" title="Click to know more about 15">15</a> Gbyte hard drive has?read the label</p></body></html> | |
| 76. |
Solve : Battery probem? |
| Answer» <html><body><p>Hi,<br/><br/>I have a <a href="https://interviewquestions.tuteehub.com/tag/1995-282368" style="font-weight:bold;" target="_blank" title="Click to know more about 1995">1995</a> Pionex Elite computer. Anyway it was running windows 95 smothly. <br/>But i hasn't been <a href="https://interviewquestions.tuteehub.com/tag/used-763273" style="font-weight:bold;" target="_blank" title="Click to know more about USED">USED</a> sice 1998 so i puled it out and it worked fine for a few hours. After the 3rd boot bios kept bothering me to replace CMOS battery or hit F1 so i hit the F1 but it tells me i have to reinstall. So i formated and tried to reinstall but it told me i have no hard drive. But the setting just changed in the bios. So i poped the lid to the computer and...... No battery! i can't find one. Any help?Part # CR2032...available almost anywhere...bottom side up on the install.meaing:? Quote from: patio on September 04, 2009, 09:25:44 AM</p><blockquote>Part # CR2032...available almost anywhere...bottom side up on the install.<br/></blockquote> <br/>The battery is a CR2032... just as you find AA's, AAA's, C's, etc.<br/><br/>They sell them in a variety of locations, including wal-mart.<br/><br/>when installing the battery, the label of the battery will face up. Although in general there is a small picture nearby on the motherboard to indicate the direction.<br/><br/>The general theme to <a href="https://interviewquestions.tuteehub.com/tag/get-11812" style="font-weight:bold;" target="_blank" title="Click to know more about GET">GET</a> from all this is to install a battery. However to revisit that you might perhaps be expecting to find a more <a href="https://interviewquestions.tuteehub.com/tag/common-923599" style="font-weight:bold;" target="_blank" title="Click to know more about COMMON">COMMON</a> form of battery, such as a Double-A? it is a small, penny-sized, coin shaped battery, usually nestled in the front near the front panel headers.no i mean i can't seem to locat the battery in computer to replace it. i found a possible battery but it's sawdered in the motherboard. Is it possible for it to be a rechargeable battery. A few types had the battery soldered to the board... is it shaped like a cigar *censored*?<br/><br/>If it is soldered, you might be out of luck, without professional help (and/or a soldering iron) as well as the replacement, which depending on it's form <a href="https://interviewquestions.tuteehub.com/tag/factor-238689" style="font-weight:bold;" target="_blank" title="Click to know more about FACTOR">FACTOR</a> might be hard to get.I was able to rescue an older board by soldering in a 2 cell AA holder....<br/>This was years and years ago and i was still pretty adept at my soldering skills.<br/>I wouldn't suggest trying it yourself...ask one of the repair shops in your area what they recommend... Quote from: BC_Programmer on September 05, 2009, 08:56:06 AM<blockquote>A few types had the battery soldered to the board... is it shaped like a cigar *censored*?<br/><br/>If it is soldered, you might be out of luck, without professional help (and/or a soldering iron) as well as the replacement, which depending on it's form factor might be hard to get.<br/></blockquote> <br/>no more like tik tak and the numbers on are 14.3063 <br/><br/>when i start it up it tells me cmos battery low and in the bios it keeps resetting as no hard drive no cd so i can't install every time i must informbios of hdd and CD<br/><br/>I'm going to leave it pluged into the power for 24h see if maybe it charges cause i think its chargeable. Even if it's chargeable...which i doubt...if it's from 1995 i wouldn't get my hopes up too much.ok tell me this in bios what sould be the setup for the hdd and Cd</body></html> | |
| 77. |
Solve : win me outlook express? |
| Answer» <html><body><p>hi,<br/> I am <a href="https://interviewquestions.tuteehub.com/tag/running-1192206" style="font-weight:bold;" target="_blank" title="Click to know more about RUNNING">RUNNING</a> Windows ME without an <a href="https://interviewquestions.tuteehub.com/tag/internet-14325" style="font-weight:bold;" target="_blank" title="Click to know more about INTERNET">INTERNET</a> connection. I want to transfer <a href="https://interviewquestions.tuteehub.com/tag/emails-25613" style="font-weight:bold;" target="_blank" title="Click to know more about EMAILS">EMAILS</a> (OE) from another <a href="https://interviewquestions.tuteehub.com/tag/computer-243299" style="font-weight:bold;" target="_blank" title="Click to know more about COMPUTER">COMPUTER</a> and work on them editing them if necessary.<br/> I cannot do it.<br/>Why?<br/>What can I do to allow this /<br/>Many thanks.<br/><br/>mishmish</p></body></html> | |
| 78. |
Solve : how can I add a toolbar below the desktop?? |
| Answer» <html><body><p>I recently added a desktop sidebar but I want a tool <a href="https://interviewquestions.tuteehub.com/tag/bar-237951" style="font-weight:bold;" target="_blank" title="Click to know more about BAR">BAR</a> where all the icons can be seen. I <a href="https://interviewquestions.tuteehub.com/tag/don-t-246903" style="font-weight:bold;" target="_blank" title="Click to know more about DONT">DONT</a> know if I can explain it well but its <a href="https://interviewquestions.tuteehub.com/tag/like-537196" style="font-weight:bold;" target="_blank" title="Click to know more about LIKE">LIKE</a> a tool bar definitely not the <a href="https://interviewquestions.tuteehub.com/tag/task-243523" style="font-weight:bold;" target="_blank" title="Click to know more about TASK">TASK</a> bar below but it contains desktop items.<br/><br/><br/>-----<br/>I have an image <a href="https://interviewquestions.tuteehub.com/tag/attached-1964039" style="font-weight:bold;" target="_blank" title="Click to know more about ATTACHED">ATTACHED</a>..<br/><br/>[attachment deleted by admin]That would be a dock.<br/><br/><a href="http://rocketdock.com/">http://rocketdock.com/</a><br/><a href="http://www.stardock.com/products/objectdock/">http://www.stardock.com/products/objectdock/</a></p></body></html> | |
| 79. |
Solve : Windows 98 SE internet problems? |
| Answer» <html><body><p>Hi, <br/><br/> I have a computer that ran windows 98. I want to update thins computer to windows 98 SE for many reson one being that Se unlike regular 98 will work correctly with a Usb flash Drive(<a href="https://interviewquestions.tuteehub.com/tag/jump-246383" style="font-weight:bold;" target="_blank" title="Click to know more about JUMP">JUMP</a> Driver) when the correct driver is installed. Unfortunately when i enterned the Windows 98 SE setup the computer told me that i have a opperating system and if i wanted to upgrade to SE i need to <a href="https://interviewquestions.tuteehub.com/tag/obtain-582970" style="font-weight:bold;" target="_blank" title="Click to know more about OBTAIN">OBTAIN</a> the windows 98 upgrade CD and the computer exits the setup. So i formated the hard disk drive and installed win 98 Se. every thing worked <a href="https://interviewquestions.tuteehub.com/tag/fine-248571" style="font-weight:bold;" target="_blank" title="Click to know more about FINE">FINE</a> but when i started on the internet, i logged on Msn then clicked hotmail link and this message popped up,<br/><br/>THis program has performed <a href="https://interviewquestions.tuteehub.com/tag/illegal-504452" style="font-weight:bold;" target="_blank" title="Click to know more about ILLEGAL">ILLEGAL</a> operation and will be shut down.<br/><br/>If this problem persists, contact the program vendor.<br/><br/>So i deleted dos partition, made new dos partition installed win 98 se and this problem still exists. Any help will be <a href="https://interviewquestions.tuteehub.com/tag/accepted-366523" style="font-weight:bold;" target="_blank" title="Click to know more about ACCEPTED">ACCEPTED</a>.<br/><br/> Comda<br/><br/> Since Microsoft hasn't supported Win98 in a long time, you should download and install the Unofficial Win98SE Service Pack.<br/><a href="http://www.softpedia.com/get/System/OS-Enhancements/Unofficial-Windows-SE-Service-Pack.shtml">http://www.softpedia.com/get/System/OS-Enhancements/Unofficial-Windows-SE-Service-Pack.shtml</a><br/>do i need a acount to download this the site tells me to do soJust sign up and provide an e-mail addy...<br/>If you dont want to do that it's available at MSFN Forums...Do i locate the file in drivers or what could u please give me a link.</p></body></html> | |
| 80. |
Solve : problem with command prompt in windows 3.1? |
| Answer» <html><body><p>i know this sounds crazy <br/>but i am using win 3.1 and <a href="https://interviewquestions.tuteehub.com/tag/whenever-2331622" style="font-weight:bold;" target="_blank" title="Click to know more about WHENEVER">WHENEVER</a> i <a href="https://interviewquestions.tuteehub.com/tag/open-245076" style="font-weight:bold;" target="_blank" title="Click to know more about OPEN">OPEN</a> command prompt<br/>a <a href="https://interviewquestions.tuteehub.com/tag/dialog-950792" style="font-weight:bold;" target="_blank" title="Click to know more about DIALOG">DIALOG</a> box comes up saying 386 display type mismatch<br/>any ideas what causes this and how to fix<br/>p.s. i am using the <a href="https://interviewquestions.tuteehub.com/tag/standerd-3073219" style="font-weight:bold;" target="_blank" title="Click to know more about STANDERD">STANDERD</a> vga <a href="https://interviewquestions.tuteehub.com/tag/driveraeur-442990" style="font-weight:bold;" target="_blank" title="Click to know more about DRIVER">DRIVER</a> but the ega one does it tooyour 386 enhanced mode grabber driver doesn't match the driver your using.<br/><br/><a href="https://support.microsoft.com/kb/63219">http://support.microsoft.com/kb/63219</a></p></body></html> | |
| 81. |
Solve : Im being bombarded by error messages (WIN 98)? |
| Answer» <html><body><p>every time i move an icon or i start up <a href="https://interviewquestions.tuteehub.com/tag/igeto-7960830" style="font-weight:bold;" target="_blank" title="Click to know more about IGET">IGET</a> an error message that says<br/>Explorer<br/>This program has preformed an illegal operation and will be shut down<br/><br/>EXPLORER casued an invalid page fault in module EXPLORER.EXE at 015f:00401f31 and SHELL32.DLL at 0167:fcb4lle.<br/><br/>Registers:<br/>EAX=00000000 CS=015f EIP=00401f31 EFLGS=0010246<br/>EBX=00000001 SS=0167 ESP=0080ff1c EBP=0080ff24<br/>ECX=c14sc770 ES=0167 ESI=00000000 FS=1c97<br/>EDX=0080ff2c ES=0167 EDI=00000000 GS=0000<br/><br/>Bytes at CS:EIP<br/>8b 08 50 ff 11 8b 45 08 50 8b 08 ff 51 08 8b 45<br/><br/>Stack Dump:<br/>00401cc0 0080ff2c 0080ff64 00405cac 00000000<br/>00000000 00000000 00000001 00404436 0059fc30<br/>00000008 00000000 00000000 00000000 0000ffff<br/>7ff31bbe<br/><br/>I can't think of anything that would cause that problem? Has this problem <a href="https://interviewquestions.tuteehub.com/tag/startedb-1949268" style="font-weight:bold;" target="_blank" title="Click to know more about STARTED">STARTED</a> after u installed some program? try uninstalling the program(s) if thats the case<br/><br/> user-comdai cant my laptop <a href="https://interviewquestions.tuteehub.com/tag/isnot-1051980" style="font-weight:bold;" target="_blank" title="Click to know more about ISNOT">ISNOT</a> connected to the internet nor did i instal anything1. <strong>Operating System</strong>. Windows 98 Standard Edition or Second Edition?<br/><br/>2. <strong>Safe Mode</strong>. Boot to Safe Mode. Does the problem occur while in Safe Mode? Tap either F5 or F8 function key once or twice per second while starting system to access safe mode.<br/><br/>3. <strong>File Versions</strong>. Search system to see where these files live and how many copies you have? What are their version numbers?<br/><br/>3. <strong>Memory Diagnostics</strong>. Test the system RAM for faulty memory. <a href="http://www.memtest86.com/">MemTest86</a> provides "free" memory diagnostic downloads to make bootable diagnostic floppy or CD. It's the "Free Download" link left side of web page.<br/><br/>4. <strong>System File Checker</strong> (sfc). Use the sfc utility to check for "<strong>corrupt</strong>" system files. Don't correct any yet; just list the corrupt files found, if any. May be invoked via "Start" -> "Run" -> enter "sfc" in text box and <a href="https://interviewquestions.tuteehub.com/tag/hit-1028201" style="font-weight:bold;" target="_blank" title="Click to know more about HIT">HIT</a> Enter key.<br/><br/>5. <strong>Incompatible DLLs</strong>. See the "possible solution" to the <a href="http://www.pcbuyerbeware.co.uk/DLLProblem.htm">DLL Problem</a> subsection on that web page. It explains why this is sometimes an intermittent problem.</p></body></html> | |
| 82. |
Solve : ME won't boot? |
| Answer» <html><body><p>I know we are now somewhat away from our O/P's original post but i feel the need to reenter the discussion. I believe it was an old venerable Tibetan monk that once declared "the only things guarantied in life are death and taxes--all others <a href="https://interviewquestions.tuteehub.com/tag/contain-409810" style="font-weight:bold;" target="_blank" title="Click to know more about CONTAIN">CONTAIN</a> an element of uncertainty". I think that is what he said. truenorth Quote from: BC_Programmer on August 11, 2009, 04:06:50 PM</p><blockquote>Maximum PC is an Awful PC magazine, IMO.<br/><br/>the only <a href="https://interviewquestions.tuteehub.com/tag/way-246442" style="font-weight:bold;" target="_blank" title="Click to know more about WAY">WAY</a> it would do so is because of the additional writes.<br/><br/>On the other hand the same argument can be used with normal hard drives, since it can be said that it wears out the actuators.<br/></blockquote> So you think you should defrag flash memory?<br/><br/>So do you know of a better PC magazine?<br/>And I actually happen to <a href="https://interviewquestions.tuteehub.com/tag/like-537196" style="font-weight:bold;" target="_blank" title="Click to know more about LIKE">LIKE</a> Maximum PC.<br/> Quote from: Cityscape on August 12, 2009, 11:28:21 AM<blockquote>So you think you should defrag flash memory?<br/><br/>So do you know of a better PC magazine?<br/>And I actually happen to like Maximum PC.<br/><br/></blockquote> <br/>hee hee<br/><br/>"awful" probably was an overstatement. I actually simply don't like PC magazines, of any form. And I don't think defragmenting flash memory is a good idea at all- after all, it does write to the cells, and the cells only have a limited (if not very large) number of write cycles they are designed for.<br/><br/>Actually I rarely defragment at all. Which is kind of funny considering that I would defragment floppy <a href="https://interviewquestions.tuteehub.com/tag/disks-769504" style="font-weight:bold;" target="_blank" title="Click to know more about DISKS">DISKS</a> on my 286.<br/><br/>In fact I purposely would <a href="https://interviewquestions.tuteehub.com/tag/fragment-998949" style="font-weight:bold;" target="_blank" title="Click to know more about FRAGMENT">FRAGMENT</a> a floppy just to see how long I could make the defragment take. (it was a 286, I couldn't exactly run Doom, so I had to occupy myself somehow, lol). Quote from: BC_Programmer on August 12, 2009, 07:55:22 PM<blockquote>In fact I purposely would fragment a floppy just to see how long I could make the defragment take. (it was a 286, I couldn't exactly run Doom, so I had to occupy myself somehow, lol).<br/></blockquote> <br/>We used to punch holes into cards before that. Has fun actually gotten any funner?</body></html> | |
| 83. |
Solve : windows 98 trying to set back up dial up? |
| Answer» <html><body><a href="https://interviewquestions.tuteehub.com/tag/hello-484176" style="font-weight:bold;" target="_blank" title="Click to know more about HELLO">HELLO</a> Everyone,<br/>This might seem like a odd request but here it goes. First I have a 2 year old gate way that just came back from service and now will not turn on. Next I have a 35 day old Dell I purchased from best buy and it also one morning last week would not boot up just black screen. <br/><br/>So, in my desperation to get to the internet I went back to my attic where my old HP computer sets. Set it up last night and thought hey dial up sucks but I have online commitments to meet. I blew off the dust and fire it up. Low and behold it seem good as new to me. Back in the day I was using this AOL was my only way to the internet. So, their screen pops up and says "aol does not have FREE dial up any longer". I could still get to the browser and was searching a few free dial up providers and when I was about to down load one I was dumped. AOL comes back on and says I need to sign back on through another internet connection then reset up an account with them.<br/><br/>MY PROBLEM is: I have ATT wireless internet connection in my home. It's my understanding my 56k modem can't be connect through wireless. Is that true? If so how can I get back AOL seeming having complete control now over this old computer?<br/><br/>Help if you have suggestions.<br/><br/>I like what I see on this site. I'm going to search around to see if I can speed this old HP up. My goal here is to have this old machine as a back up to my laptops. Funny I realized I had this hP for 10 plus years. Never needed repaired. Never crashed. Why do I struggle with <a href="https://interviewquestions.tuteehub.com/tag/lap-1066372" style="font-weight:bold;" target="_blank" title="Click to know more about LAP">LAP</a> tops??<br/><br/>Thanks for taking the time to reply,<br/>Kyou can install a NIC or wireless NIC into the HP to connect it to your router/modem.<br/><br/>Their are USB devices you can buy as well that can add wireless functionality.O really even to a unit as old as this? Ok, I will get all my machine specs and go to best buy and see if they can help me.<br/><br/>I'll let you know if it works.<br/>Thanks,<br/>Kyep, all you need is a open PCI slot.<br/><br/>I was using a PC from around 1999 until recently- probably newer then your HP (?).<br/><br/>"PCI" has been the connection interface since around 1994, so you should be alright. Just make sure you have a free slot. worst case scenario you remove the Modem, which is possibly consuming a PCI slot, and replace it directly with a network card.<br/><br/>What OS is your HP running? Quote from: BC_Programmer on August 10, 2009, 03:08:32 PM<blockquote>What OS is your HP running?<br/></blockquote> I'd take a guess that it's running 98 or 98SE.Thanks for the reply.<br/>I don't know what a PCI slot is. I have two spots where the usb ports can plug in. Are we talking about the small <a href="https://interviewquestions.tuteehub.com/tag/narrow-1110745" style="font-weight:bold;" target="_blank" title="Click to know more about NARROW">NARROW</a> slots? <br/>Lastly I don't know what OS means. Windows 98 is the best I can do. I need to start it up and look at my control panel to get these details?<br/><br/>Sorry to still be in the dark ages. At my age I'm going kicking and screaming into this world (48). After two lap tops going black. I have a real concern with doing <a href="https://interviewquestions.tuteehub.com/tag/business-21797" style="font-weight:bold;" target="_blank" title="Click to know more about BUSINESS">BUSINESS</a> online.<br/><br/>Thanks again,<br/>KA PCI slot is a slot located to the lower rear of your motherboard. There should be 2-6 of them. They are about 2.5 inches long and look like their designed for a card of some type. Your PC probably has a least 1 PCI card plugged in (a modem maybe). The PCI will have a plug for whatever it is one the rear of your case when plugged in.<br/> Quote from: kdtl61 on August 11, 2009, 02:09:28 PM<blockquote>Thanks for the reply.<br/>I don't know what a PCI slot is. I have two spots where the usb ports can plug in. <br/></blockquote> The PCI are at the bottom of the motherboard while USB will be near the middle or top.Thank you all again for your advise. Last night I went home and dug into my paperwork on this machine. Here are all the specs of this 1999 HP pc<br/><br/>intel celeron 366 MHZ<br/>64 MB memory<br/>6.4 gigabyte hard drive<br/>32x max ce-rom drive<br/>56K Flex V.90 modem<br/>128K level 2 cache<br/>ATI rage IIC graphics 4mb video memory<br/><br/>Side note I got into the control panel and clicked on Modem: It list the 56k but it also listed the following:<br/>Modem RockwellHCF 56k speaker phone PCI modem<br/>I bring this up since CITYSCAPE from above suggest I can hook up my add on wireless through this port.<br/><br/>Now that you all can see what I'm working with what suggestion for up grades do you see are possible for this machine? <br/>My goals are to be able to work with my AT&T wireless. To have a bit more speed ..just because why not? My usage is for one thing only that is to be able to get to the internet, get to the Googles Doc site and do the work I have to do there with templates. Lastly I want a pc that will turn on when needed when my lap tops fail. A good old back up.<br/><br/>Any suggestion?<br/>Thanks for your time once again,<br/>K<br/>OK, it's Operating System is almost assuredly windows 98 or 98SE.<br/><br/>The problem there... is that I cannot think of a wireless card that will install in windows 98. If you look for one, make sure that it supports it.<br/><br/>Another issue: Installing a wireless card entails taking the PC case off and plugging the card into the Guts. If your not comfortable with that, we'll need to find a way to get your Modem to communicate with your router or ADSL modem... Which I have no experience with. Quote from: kdtl61 on August 12, 2009, 07:08:03 AM<blockquote>Now that you all can see what I'm working with what suggestion for up grades do you see are possible for this machine? <br/>My goals are to be able to work with my AT&T wireless. To have a bit more speed ..just because why not? My usage is for one thing only that is to be able to get to the internet, get to the Googles Doc site and do the work I have to do there with templates. Lastly I want a pc that will turn on when needed when my lap tops fail. A good old back up.<br/></blockquote> Please let use know the model of your motherboard.<br/>Most upgrades are largely affected by your motherboard.<br/><br/>If you can't find you motherboard model use a small program called Belarc Advisor (get here: <a href="http://www.belarc.com/free_download.html">http://www.belarc.com/free_download.html</a>). It will tell you everything about your PC. You find motherboard info under the "Main Circuit Board" section.CityScape,<br/>Would I have to down load that program into the HP computer? If so thats my first problem I can't get to the internet. If I open the unit will it have a marking on the mother board? Sounds like finding the mother board model is my last hope. I'll look for more info tonight. Thanks<br/><br/>I might have to take to a local computer guy to see if the Wireless is possible. I have said all along it's Running Window 98. I'm not sure what the 98SE is. *SPAM* can you tell I'm hopeless? Yet, I still believe anything is possible:)<br/>Thanks, <br/>K Quote from: kdtl61 on August 12, 2009, 01:15:41 PM<blockquote>I might have to take to a local computer guy to see if the Wireless is possible. I have said all along it's Running Window 98. I'm not sure what the 98SE is.<br/></blockquote> That's why I want to know the motherboard model. If it's good enough you could upgrade to OS, you computer already meets bear minimum XP requirements.<br/> Quote from: kdtl61 on August 12, 2009, 01:15:41 PM<blockquote>CityScape,<br/>Would I have to down load that program into the HP computer? If so thats my first problem I can't get to the internet.<br/></blockquote> no, you could download the program on any computer and move it to your 98 PC by means of a USB flash drive and then install on that PC.<br/> Quote from: kdtl61 on August 12, 2009, 01:15:41 PM<blockquote>If I open the unit will it have a marking on the mother board? Sounds like finding the mother board model is my last hope. I'll look for more info tonight. Thanks<br/></blockquote> Maybe, but is unlikely.<br/><br/>I recommend using Belarc Advisor or let me know the exact HP model and I can maybe find the motherboard info. Quote<blockquote>I have said all along it's Running Window 98. I'm not sure what the 98SE is.<br/></blockquote> Windows 98 came in two editions- plain old windows 98, and 98SE (second edition).<br/><br/>Most stuff out there these days that will work with windows 98 only works with 98SE. In fact most USB devices don't work with the first edition- this makes the USB flash <a href="https://interviewquestions.tuteehub.com/tag/option-25810" style="font-weight:bold;" target="_blank" title="Click to know more about OPTION">OPTION</a> a bit difficult, as well.<br/><br/>If you've successfully used any USB devices then You probably do have windows 98SE.<br/><br/>Want to find out? Right Click my computer and select properties- the windows version number should appear on the dialog that pops up. the version for the first edition was 4.10.1998 (I think) and SE was 4.10.2222.<br/><br/><br/> Quote<blockquote><br/>That's why I want to know the motherboard model. If it's good enough you could upgrade to OS, you computer already meets bear minimum XP requirements.<br/></blockquote> <br/>NO. that is all i have to say about that. The way it is configured right now is about average, maybe even on the higher side for PCs that came with windows 98. If any upgrade occurs it should me to 98SE... XP is definitely out of the question, without major upgrades to video, RAM, and HD space. Not to mention a copy of XP, which won't be cheap. That type of money would be better spent upgrading their main machines... assuming they are willing to spend it at all. Quote from: BC_Programmer on August 12, 2009, 07:36:31 PM<blockquote>NO. that is all i have to say about that. The way it is configured right now is about average, maybe even on the higher side for PCs that came with windows 98. If any upgrade occurs it should me to 98SE... XP is definitely out of the question, without major upgrades to video, RAM, and HD space. Not to mention a copy of XP, which won't be cheap. That type of money would be better spent upgrading their main machines... assuming they are willing to spend it at all.<br/></blockquote> I didn't say anything about upgrading to XP. I just stated that the PC does meet XP requirements. I would actually suggest him/her to get 98 SE, ME or maybe 2000 but never XP.OK those make more sense.</body></html> | |
| 84. |
Solve : Windows 3.1 Display settings error.? |
| Answer» <html><body><p>Attached is the message I get when trying to <a href="https://interviewquestions.tuteehub.com/tag/play-251439" style="font-weight:bold;" target="_blank" title="Click to know more about PLAY">PLAY</a> my game.<br/>How do I change Win 3.11 to <a href="https://interviewquestions.tuteehub.com/tag/256-297976" style="font-weight:bold;" target="_blank" title="Click to know more about 256">256</a> colors?<br/><br/>[attachment deleted by admin]You need to run the Windows Setup program. Is it still available under the main program group? Do you have appropriate drivers for your display adapter?I just need to know how to change my display setting to 256 colors.<br/>not reinstall. Quote from: Rob Pomeroy on July 24, 2009, 03:10:13 PM</p><blockquote>You need to run the Windows Setup program. Is it still available under the main program group? Do you have appropriate drivers for your display adapter?<br/></blockquote> <br/>This does not reinstall Windows. Quote from: Rob Pomeroy on July 24, 2009, 03:10:13 PM<blockquote>You need to run the Windows Setup program. <br/></blockquote> Okay, i'm there.<br/>What do I change? Quote from: <a href="https://interviewquestions.tuteehub.com/tag/cityscape-7672434" style="font-weight:bold;" target="_blank" title="Click to know more about CITYSCAPE">CITYSCAPE</a> on July 24, 2009, 09:35:49 PM<blockquote>Okay, i'm there.<br/>What do I change?<br/></blockquote> What do I change guys?what is your video currently set to?<br/><br/>are you using an emulator? If So, which one? Virtual PC, as an example, emulates the S3 Trio and as such one should install the S3 Trio drivers...Virtual PC.<br/><br/>Windows Setup says the Display is set to VGA.therein be the <a href="https://interviewquestions.tuteehub.com/tag/problem-25530" style="font-weight:bold;" target="_blank" title="Click to know more about PROBLEM">PROBLEM</a>- you need to install the S3 Trio drivers for windows 3.1 onto the VM.<br/><br/>It's a huge PITA to find on the web... at least it was for me, so I'll attach them.<br/><br/><br/>Basically, get them onto the VM; in a separate folder.<br/><br/>Then, with the windows setup program, select "have disk" for video; then enter the path to where you unzipped the files; it will then give you a number of options; choose one (<a href="https://interviewquestions.tuteehub.com/tag/personally-2219895" style="font-weight:bold;" target="_blank" title="Click to know more about PERSONALLY">PERSONALLY</a> I prefer the 24-bit colour options...) <br/><br/><br/><br/>[attachment deleted by admin]</body></html> | |
| 85. |
Solve : windows 95 Wont boot up? |
| Answer» <html><body><p>Have checksum cmos error <a href="https://interviewquestions.tuteehub.com/tag/run-1192138" style="font-weight:bold;" target="_blank" title="Click to know more about RUN">RUN</a> <a href="https://interviewquestions.tuteehub.com/tag/setup-1203067" style="font-weight:bold;" target="_blank" title="Click to know more about SETUP">SETUP</a> when booting computor.How do i access the setup menu?Try keys such as Delete, <a href="https://interviewquestions.tuteehub.com/tag/f-236701" style="font-weight:bold;" target="_blank" title="Click to know more about F">F</a>* Keys, Esc<br/><br/>What is the make/model of PC<br/><br/>Cameron GrayReplace the CMOS battery...part# CR2032...about the size of a nickel; dime; <a href="https://interviewquestions.tuteehub.com/tag/penny-1149992" style="font-weight:bold;" target="_blank" title="Click to know more about PENNY">PENNY</a> or Quarter if you're in Canada... Quote from: patio on August 01, 2009, 04:30:45 PM</p><blockquote>Replace the CMOS battery...part# CR2032...about the size of a nickel; dime; penny or Quarter if you're in Canada...<br/></blockquote> <br/>Actually, I <a href="https://interviewquestions.tuteehub.com/tag/found-458144" style="font-weight:bold;" target="_blank" title="Click to know more about FOUND">FOUND</a> out what the quarter sized one was.<br/><br/>it's a CR2016 battery, not CR2032.<br/><br/>obviously it won't fit in a PC.</body></html> | |
| 86. |
Solve : Uninstalled windows me and having trouble with the windows 98 left on computer? |
| Answer» <html><body><p>I HAVE A COMPUTER I HAD UPGRADED FROM A WINDOWS 98 TO A WINDOWS MILLENIUM RAN BEAUTIFUL FOR YEARS KIDS MESSED UP COMPUTER I COULD SYSTEM RESTORE AND I COULDN'T GO INTO SAFE MODE SO I DECIDED TO GET WHAT I WANTED OFF COMPUTER AND UNINSTALL THE WINDOWS MILLENIUM AND GO BACK TO WINDOWS 98 STILL ON COMPUTER. WELL WINDOWS ME UNINSTALLED AND NOW THE WINDOWS 98 WON'T WORK EITHER. WHEN LOADING WINDOWS IT SAYS CANNOT FIND A DEVICE THAT MAY BE NEEDEDD TO RUN WINDOWS OR A WINDOWS APPLICATION, THE WINDOWS REGISTRY OR SYSTEM.INI FILE REFERS TO THIS DEVICE FILE BUT THE DEVICE FILE NO LONGER EXISTS. IF YOU DELETED THIS FILE ON PURPOSE, TRY UNINSTALLING THE ASSOCIATED APPLICATION USING IT'S UNINSTALL OR SETUP PROGRAM. IF YOU STILL WANT TO USE THE APPLICATION ASSOCIATED WITH THIS DEVICE FILE, TRY REINSTALLING THAT APPLICATION TO REPLACE THE MISSING FILE. THEN IT SHOWS C:\PROGRA~1\NORTON~1\NAVAP.VXD PRESS ANY KEY TO CONTINUE SO I DO THAT THEN IT SAYS EVERYTHING AGAIN TIL C:\PROGRA~1SYMATEC\SYMEVNT.386 PRESS ANY KEY TO CONTINUE AND I DO SAYS ALL THAT AGAIN TIL C:\WINDOWS\SYSTEM\vshinit.vxd then press any key to continue AND I DO THEN EVERYHING AGAIN TIL MSMOUSE.VXD PRESS ANY KEY TO CONTINUE AND I DO.THEN WE WAIT A MINUTE ANDI SEE THE WINDOWS 98 BACKROUND DETECTS MOUSE AND WIZARD SEARCHES FOR NEW DRIVERS FOR OPTICAL MOUSE THEN FREEZES <a href="https://interviewquestions.tuteehub.com/tag/tried-7272297" style="font-weight:bold;" target="_blank" title="Click to know more about TRIED">TRIED</a> RESTORE POINT AND STILL NOTHINGPlease turn off caps lock. Posting in all capital letters makes your post harder to read, <a href="https://interviewquestions.tuteehub.com/tag/plus-591752" style="font-weight:bold;" target="_blank" title="Click to know more about PLUS">PLUS</a> it is considered the <a href="https://interviewquestions.tuteehub.com/tag/text-11613" style="font-weight:bold;" target="_blank" title="Click to know more about TEXT">TEXT</a> <a href="https://interviewquestions.tuteehub.com/tag/equivalent-446407" style="font-weight:bold;" target="_blank" title="Click to know more about EQUIVALENT">EQUIVALENT</a> of <a href="https://interviewquestions.tuteehub.com/tag/shouting-1206526" style="font-weight:bold;" target="_blank" title="Click to know more about SHOUTING">SHOUTING</a>. <br/>Please tell us how you uninstalled Windows ME and how you reinstalled Windows 98? Quote from: pragma on July 14, 2009, 02:46:29 PM</p><blockquote>Please turn off caps lock. Posting in all capital letters makes your post harder to read, plus it is considered the text equivalent of shouting. <br/>Please tell us how you uninstalled Windows ME and how you reinstalled Windows 98?<br/></blockquote> <br/>I think the only way he can uninstall WinME is if he had a Win98 to WinME upgrade CD. Then he would just go into Control Panel - Add/Remove and uninstall WinME. The problem with doing this is as he's found out the Win98 files maybe missing or corrupt in someway so he's a bit stuck. The only way out of this is to buy a Win98SE CD of eBay they are quite cheap. I assume he has a floppy drive. Download a WinME <a href="http://www.bootdisk.com">BootDisk</a> and get a friend who has a floppy drive to make him a boot disk. Then he can format the drive and install Win98SE. The other think he will have to do is find all the drivers for his additional hardware, video card, sound card, printer, scanner etc. He will need these for a new install.</body></html> | |
| 87. |
Solve : Can I buy Windows 98?? |
| Answer» <html><body><p>I need a copy of <a href="https://interviewquestions.tuteehub.com/tag/windows-22662" style="font-weight:bold;" target="_blank" title="Click to know more about WINDOWS">WINDOWS</a> 98. I have lost the copy I had. It came with the computer my Son <a href="https://interviewquestions.tuteehub.com/tag/built-245060" style="font-weight:bold;" target="_blank" title="Click to know more about BUILT">BUILT</a> for me. I have lost it and need to replace it. Is there any place that I can buy a copy. Have a look here:<br/><br/><a href="https://www.amazon.com/s/ref=nb_ss_gw?url=search-alias%3Daps&field-keywords=windows+98&x=0&y=0">http://www.amazon.com/s/ref=nb_ss_gw?url=search-alias%3Daps&field-keywords=windows+98&x=0&y=0</a><br/><br/><a href="http://shop.ebay.com/?_from=R40&_trksid=p3907.m38.l1313&_nkw=windows+98&_sacat=See-All-Categories">http://shop.ebay.com/?_from=R40&_trksid=p3907.m38.l1313&_nkw=windows+98&_sacat=See-All-Categories</a><br/><br/>I have a link on my website in which you get it free at:<br/><em>[link Removed]</em><br/>This place has old OS only.<br/>If you prefer to buy a boxed W'98, see amazon.com or ebay.com.Thanks for the <a href="https://interviewquestions.tuteehub.com/tag/information-238790" style="font-weight:bold;" target="_blank" title="Click to know more about INFORMATION">INFORMATION</a>. I tried the down load it said that it would take 17 hours. I guess I will just buy it.Free download of a Windows <a href="https://interviewquestions.tuteehub.com/tag/operating-1136761" style="font-weight:bold;" target="_blank" title="Click to know more about OPERATING">OPERATING</a> system? Read the rules Neelchauhan.<br/><br/>Despite how old it is, Windows 98 is still copyrighted by Microsoft and is NOT FREE.Try:<br/><a href="https://www.amazon.com/gp/offer-listing/B001BOAIH4/ref=sr_1_olp_6?ie=UTF8&s=software&qid=1248219669&sr=8-6">http://www.amazon.com/gp/offer-listing/B001BOAIH4/ref=sr_1_olp_6?ie=UTF8&s=software&qid=1248219669&sr=8-6</a><br/><a href="https://www.amazon.com/gp/offer-listing/B00002JV62/ref=sr_1_olp_1?ie=UTF8&s=software&qid=1248219669&sr=8-1">http://www.amazon.com/gp/offer-listing/B00002JV62/ref=sr_1_olp_1?ie=UTF8&s=software&qid=1248219669&sr=8-1</a><br/><br/>NONE of MS OS's are free, you'd be getting an illegal copy by downloading off that link. actually, you can get free copies of Dos through Windows 95 (might only be Windows 3.1) straight from Microsoft themselves. The only thing is, you have to have a technet subscription, which I think starts at $250/year.$349.00thanks, patio. I don't think I ever really knew what the price is.... my work <a href="https://interviewquestions.tuteehub.com/tag/pays-1149348" style="font-weight:bold;" target="_blank" title="Click to know more about PAYS">PAYS</a> for my subscription. It's still a steal...if you take full advantage of all the perks.<br/>I did a Win2008 open seminar earlier this year locally...<br/>All it cost me was Cab Fare and i probably ate enough to cover this year's subscription in 2 days...<br/><br/></p></body></html> | |
| 88. |
Solve : Explorer.exe Illegal Operation? |
| Answer» <html><body><a href="https://interviewquestions.tuteehub.com/tag/ok-1127144" style="font-weight:bold;" target="_blank" title="Click to know more about OK">OK</a> I have a old Packard Bell Windows 98 computer, and it worked fine until I tried to restore it (because one of my fonts was messed up or something, I can't really remember) and it worked, but when it booted up, and got to the desktop, it said this: "This program has preformed an illeagal operation and will be shut down) So of course I click on Details, and its explorer.exe. Well the first thing I thought was (Well, I guess I'm pretty screwed now!) but then I found this site so I'm hopeing one of you guys on this site can help me. If you don't know what this error does, it will let you go to your desktop but your icons or the taskbar will not appear. I have the error report below.<br/><br/>EXPLORER casued an invalid page fault in module EXPLORER.EXE at 015f:00401f31<br/><br/>Registers:<br/>EAX=00000000 CS=015f EIP=00401f31 EFLGS=0010246<br/>EBX=00000001 SS=0167 ESP=0080ff1c EBP=0080ff24<br/>ECX=c14sc770 ES=0167 ESI=00000000 FS=1c97<br/>EDX=0080ff2c ES=0167 EDI=00000000 GS=0000<br/><br/>Bytes at CS:EIP<br/>8b 08 50 ff 11 8b 45 08 50 8b 08 ff 51 08 8b 45<br/><br/>Stack Dump:<br/>00401cc0 0080ff2c 0080ff64 00405cac 00000000<br/>00000000 00000000 00000001 00404436 0059fc30<br/>00000008 00000000 00000000 00000000 0000ffff<br/>7ff31bbe<br/><br/><br/>If anyone has a solution it would be greatly apprciated<br/>By the way I tried to restore from the command promp, and it said "Restore Failed" so I can't restore eitherFollow the instructions at <a href="https://support.microsoft.com/default.aspx?scid=kb;en-us;191609">THIS PAGE</a>, and see if the problem is corrected.Try restarting explorer.exe by:<br/>1. go to Task Manager (CTL+ALT+DEL)<br/>2. on the Task Manager windows click File and then New Task<br/>3. type explorer.exe in the window and then click OK Quote from: Aegis on July 12, 2009, 02:44:45 AM<blockquote>Follow the instructions at <a href="https://support.microsoft.com/default.aspx?scid=kb;en-us;191609">THIS PAGE</a>, and see if the problem is corrected.<br/></blockquote> <br/>I already tried that....It didnt work it said "file not found" or something similar Quote from: Cityscape on July 12, 2009, 04:49:46 PM<blockquote>Try restarting explorer.exe by:<br/>1. go to Task Manager (CTL+ALT+DEL)<br/>2. on the Task Manager windows click File and then New Task<br/>3. type explorer.exe in the window and then click OK<br/></blockquote> <br/>All right thanks for the help. I'll see if it works then I'll get back to youDo you have a Win98 CD, where you can get the explorer file from that? Quote from: Aegis on July 12, 2009, 05:53:19 PM<blockquote>Do you have a Win98 CD, where you can get the explorer file from that?<br/></blockquote> maybe, I'll have to ask my dad, If we do have it, what do I do? <br/><br/>I dont want to reformat it, because I still have a lot of my files on there that aren't on this computer. Quote from: Cityscape on July 12, 2009, 04:49:46 PM<blockquote>Try restarting explorer.exe by:<br/>1. go to Task Manager (CTL+ALT+DEL)<br/>2. on the Task Manager windows click File and then New Task<br/>3. type explorer.exe in the window and then click OK<br/></blockquote> <br/><br/> Quote<blockquote>Windows 98 computer<br/></blockquote> <br/> Quote from: BC_Programmer on July 12, 2009, 07:18:58 PM<blockquote><br/><br/></blockquote> ok... Quote from: Cityscape on July 12, 2009, 04:49:46 PM<blockquote>Try restarting explorer.exe by:<br/>1. go to Task Manager (CTL+ALT+DEL)<br/>2. on the Task Manager windows click File and then New Task<br/>3. type explorer.exe in the window and then click OK<br/></blockquote> <br/>my windows 98 doesnt have the option to create a new task, it just has close program, shut down, and <a href="https://interviewquestions.tuteehub.com/tag/cancel-406753" style="font-weight:bold;" target="_blank" title="Click to know more about CANCEL">CANCEL</a> so i cant do this....any other suggestions?Yes.... That's what I was pointing out to cityscape, his steps are for NT/XP/Vista.<br/><br/><br/> Quote<blockquote>and it worked fine until I tried to restore it<br/></blockquote> <br/><br/> Quote<blockquote>I dont want to reformat it, because I still have a lot of my files on there that aren't on this computer.<br/></blockquote> <br/>Well... Windows 98 didn't have a restore feature... so I'm thinking you ran through the system recovery... which thus <a href="https://interviewquestions.tuteehub.com/tag/deletes-947562" style="font-weight:bold;" target="_blank" title="Click to know more about DELETES">DELETES</a> everything on the drive. But let's proceed as if it didn't.<br/><br/>You Could get an external USB enclosure and remove the windows 98 PC's HD and plug it into the external enclosure. Then plug that into your PC and copy the files you want over.<br/><br/><br/>Then if you wanted you could reformat it and try to get win98 working again... or just use the HD as extra storage. Quote from: Gate001 on July 15, 2009, 11:39:34 PM<blockquote>my windows 98 doesnt have the option to create a new task, it just has close program, shut down, and cancel so i cant do this....any other suggestions?<br/></blockquote> Quote from: BC_Programmer on July 16, 2009, 09:04:03 AM<blockquote>Yes.... That's what I was pointing out to cityscape, his steps are for NT/XP/Vista.<br/></blockquote> Oops, sorry, I don't use 98 much anymore so I didn't remember that was for the NT/2000/XP/Vista systems only.Does it boot up and work successfully in "Safe <a href="https://interviewquestions.tuteehub.com/tag/mode-239384" style="font-weight:bold;" target="_blank" title="Click to know more about MODE">MODE</a>"?<br/><br/>What did you use and/or how did you "restore" the system? Quote from: dahlarbear on July 16, 2009, 05:07:04 PM<blockquote>Does it boot up and work successfully in "Safe Mode"?<br/><br/>What did you use and/or how did you "restore" the system?<br/></blockquote> <br/>I've gone to safe mode, it does the exact same thing. And to restore it I went to the command prompt and typed "scanreg/restore" then went to one of the .cab files for restoring, then it said, "restore failed" I <a href="https://interviewquestions.tuteehub.com/tag/eventually-976663" style="font-weight:bold;" target="_blank" title="Click to know more about EVENTUALLY">EVENTUALLY</a> tried all of them, only to get the same error so no restoring, or safe mode either...</body></html> | |
| 89. |
Solve : Audio on windows 95? |
| Answer» <html><body><p>Okay so i got my computer onto the interwebz, and I also got the driver for my graphics card (after some trial and error). But now I cannot get any audio downloading the driver. In device manager, it says it is there (under TBS montego pci somethingsomething.... lol) and everytime I boot up the computer it is looking for directx 6.0. However, I cannot locate the one for this device. Any help please?Re-install your MBoard <a href="https://interviewquestions.tuteehub.com/tag/drivers-21170" style="font-weight:bold;" target="_blank" title="Click to know more about DRIVERS">DRIVERS</a> from the PC's driver CD.This is an OEM version i put on a computer with 2000 pre-installed, so I do not have the driver CD. Also the driver on the dell site doesnt provide me with directx 6.0, just the driver for the audio cardDoes anybody know if it is possible to get the directx 6.0 alone as an install?<br/>Couldn't find a link on the MS site but try this:<br/><br/><a href="https://downloads.zdnet.com/abstract.aspx?docid=671873">http://downloads.zdnet.com/abstract.aspx?docid=671873</a><br/><br/><br/>The latest version of DX that runs on 95 is 8.1.Thanks anyway, but I ended up finding a <a href="https://interviewquestions.tuteehub.com/tag/diff-431920" style="font-weight:bold;" target="_blank" title="Click to know more about DIFF">DIFF</a> comp to install win 95 on which has the drivers for the audio already. Now im just looking for the driver for the following for windows 95:<br/><br/>STB Nitro 3D (S3 Virge-dx/gx 375/385)wait, we were looking for sound driver? I thought you <a href="https://interviewquestions.tuteehub.com/tag/wanted-3266983" style="font-weight:bold;" target="_blank" title="Click to know more about WANTED">WANTED</a> DX. <a href="https://interviewquestions.tuteehub.com/tag/oh-244194" style="font-weight:bold;" target="_blank" title="Click to know more about OH">OH</a> well.<br/><br/>for the video try some of the ones listed here:<br/><br/><a href="http://www.filewatcher.com/m/w9531201.zip.249912.0.0.html">http://www.filewatcher.com/m/w9531201.zip.249912.0.0.html</a><br/><br/><br/><br/><br/><br/> Quote from: BC_Programmer on July 08, 2009, 05:37:06 PM</p><blockquote>wait, we were looking for sound driver? I thought you wanted DX. oh well.<br/><br/>for the video try some of the ones listed here:<br/><br/><a href="http://www.filewatcher.com/m/w9531201.zip.249912.0.0.html">http://www.filewatcher.com/m/w9531201.zip.249912.0.0.html</a><br/><br/>thank you! yea i needed DX in order for my sound card to work.<br/><br/><br/><br/><br/><br/></blockquote></body></html> | |
| 90. |
Solve : Staring my Windows 98? |
| Answer» <html><body><p>While trying to figure out why I have only 16 colors on my Windows 98 I installed my Monitor a Proview I restarted my computer and after the 98 logo the screen goes black I can only log on to Safe mode but i ca't reinstal windows there? restart the computer, tap F8, and select VGA mode It will allow you to boot into windows normally, with use of the <a href="https://interviewquestions.tuteehub.com/tag/basic-15343" style="font-weight:bold;" target="_blank" title="Click to know more about BASIC">BASIC</a> video driver........oh..........you don't need to reinstall windows to get a higher resolution or more colors.....Most likely you need to check in Device Manager and update the video driver....<br/><br/>try <a href="https://interviewquestions.tuteehub.com/tag/booting-772749" style="font-weight:bold;" target="_blank" title="Click to know more about BOOTING">BOOTING</a> into Safe Mode with Networking, then go here:<br/><br/>START>right click "my computer">properties>device manager<br/><br/>next to where it says, "display <a href="https://interviewquestions.tuteehub.com/tag/adapters-367565" style="font-weight:bold;" target="_blank" title="Click to know more about ADAPTERS">ADAPTERS</a>", click on the + sign....right click on the item in the sub menu and click update...and see if Windows will look for an updated driver for your monitor<br/><br/>If it finds an updated driver, restart the computer and see if you've got more colors or if you know what kind of graphics card you got, you can go right to the graphics card driver and get the latest drivers (nvidia.com or ati.com for most average users usually)DLoad;install and run AIDA32...<br/>Post the computer summary portion here so we know what we're dealing with... Quote from: blockHEAD on June 29, 2009, 05:45:44 PM</p><blockquote>restart the computer, tap F8, and select VGA mode It will allow you to boot into windows normally, with use of the basic video driver........<br/></blockquote> <br/><br/>THanks but when i do this the computer <a href="https://interviewquestions.tuteehub.com/tag/gives-763601" style="font-weight:bold;" target="_blank" title="Click to know more about GIVES">GIVES</a> me 6 opts. <br/>1Normal<br/>2Logged(bootlog.Txt<br/>3Safe mode<br/>4step by step confirmation<br/>5comand prompt only<br/>6safe mode with comand prompt onlytssk tssk, Blockhead,- Windows 98 doesn't have a VGA mode. Also I believe they removed the "safe mode with networking" option, for some strange reason. (probably related to the User-mode driver framework first released with windows 98)<br/><br/>are you sure these are <em>monitor</em> and not Display drivers you installed? Either way- Safe mode should get you into the PC, at least enough to<br/> Quote from: patio on June 30, 2009, 06:44:52 PM<blockquote>DLoad;install and run AIDA32...<br/>Post the computer summary portion here so we know what we're dealing with...<br/></blockquote> <br/> Quote from: BC_Programmer on July 01, 2009, 07:34:25 PM<blockquote>tssk tssk, Blockhead,- Windows 98 doesn't have a VGA mode. <br/></blockquote> <br/>oops... heh, Quantos HAD a post here. I SAW IT! <br/><br/>IN either case- I already double-checked myself. my windows 98 laptop has the same options described by the OP (that is, no VGA mode or networking option).<br/><br/>I was thinking of the generic VGA drivers. However I can't find my key for Windows 98 so re-installing it on MS VPC is a moot point.Windows 98 SE has Safe Mode With Networking Support Quote from: blockHEAD on July 02, 2009, 01:43:50 AM<blockquote>Windows 98 SE has Safe Mode With Networking Support <br/></blockquote> <br/>weird. neither my VPC install nor my "real" install on my laptop has that option. Not saying your wrong, of course. Just never seen it. (sure it isn't First Edition? I think that had it) Quote from: BC_Programmer on July 02, 2009, 08:49:11 AM<blockquote>weird. neither my VPC install nor my "real" install on my laptop has that option. Not saying your wrong, of course. Just never seen it. (sure it isn't First Edition? I think that had it)<br/></blockquote> <br/>the computer is 2nd edition 98 it worked corretly until i installed the monitor in the display propertys. I placed the hard disk into my other 98 and i put the <a href="https://interviewquestions.tuteehub.com/tag/settings-771535" style="font-weight:bold;" target="_blank" title="Click to know more about SETTINGS">SETTINGS</a> to defult settings. Quote from: BC_Programmer on July 02, 2009, 08:49:11 AM<blockquote>sure it isn't First Edition?<br/></blockquote> <br/>quite sure. It's the new installation I've been messing with for the last few days..</body></html> | |
| 91. |
Solve : 98Se bootdisk help!? |
| Answer» <html><body><p>Hi I'm trying to install <a href="https://interviewquestions.tuteehub.com/tag/98se" style="font-weight:bold;" target="_blank" title="Click to know more about 98SE">98SE</a>. It does not boot by it's self, and i always use a 98se bootdisk and then at the prompt (A:\>) type the command needed to install.<br/><br/>My problem is that I've somehow forgot what to type or how to type it!<br/>Does anyone know what i need to type?the command to run the installation is: setup.exe<br/><br/>Just be sure the installation CD is inserted when you type it. When you press enter, it will scan your hard drive for error before starting the installation....just let it run and when the scan is done, just press "exit" and it will go into the installation..<br/><br/>But you may have problems installing it without formatting the drive first..<br/><br/>If I were you I would type: format c: first, press enter and let it format the drive..<br/><br/>Try starting the installation without formatting and see what happens <br/><br/><br/>and be sure when you boot up the bootdisk, select, "start with CD rom support", otherwise the installation disk will not be read..Okay my problem was I was <a href="https://interviewquestions.tuteehub.com/tag/typing-1434978" style="font-weight:bold;" target="_blank" title="Click to know more about TYPING">TYPING</a> D:setup.exe instead of R:setup.exe.<br/>I forgot that my bootdisk always labels the CD drive as R: for some reason.<br/><br/>thanks <a href="https://interviewquestions.tuteehub.com/tag/anyway-2436609" style="font-weight:bold;" target="_blank" title="Click to know more about ANYWAY">ANYWAY</a> It labels your CD as R because you are probably using a boot disk with RAM DISK support.... The contents of the bootdisk are <a href="https://interviewquestions.tuteehub.com/tag/loadedbrbr-2797226" style="font-weight:bold;" target="_blank" title="Click to know more about LOADED">LOADED</a> into RAM, and that area of RAM is <a href="https://interviewquestions.tuteehub.com/tag/given-473447" style="font-weight:bold;" target="_blank" title="Click to know more about GIVEN">GIVEN</a> the drive letter "R",in your case.<br/><br/>However, the boot disk I use is given the drive letter "D", so it bumps up the CD drive one letter...."E"Reading the autoexec.bat and config.sys file in any text editor from the floppy will tell you ahead of time what drive letter is assigned to the CD drive....<br/>But R is the most common with OEM boot floppies...</p></body></html> | |
| 92. |
Solve : problem dual booting XP and Windows 98? |
| Answer» <html><body><p>I have Windows XP installed on <a href="https://interviewquestions.tuteehub.com/tag/one-241053" style="font-weight:bold;" target="_blank" title="Click to know more about ONE">ONE</a> hard drive and Win98 SE installed on another hard drive... Both installations work fine when there is only one drive on the system at a time. However, I set up the boot.ini file so I can boot into either XP or Win98.....BUT, when I Master the XP drive and slave the Win98 drive, I can't boot into Windows 98.<br/><br/>At first it says, "missing hal.dll".........ok so I copy the hal.dll file from the XP drive to <strong>Windows\system32</strong> on the Win 98 drive, restart and try again......Next attempt to boot into Win98 I get, "missing ntoskrnl.exe" Fine, so I go get ntoskrnl.exe from the XP drive and copy it to <strong>Windows\system32</strong> on the Win98 drive.....restart and try again..<br/><br/>Now when I boot into Win98 it says, "load needed DLLs for kernal" <br/><br/>Windows 98 boots up fine when it's not hooked up as a slave drive..... <br/><br/>I'm pretty sure my boot.ini file is right:<br/><br/>[boot <a href="https://interviewquestions.tuteehub.com/tag/loader-1076690" style="font-weight:bold;" target="_blank" title="Click to know more about LOADER">LOADER</a>]<br/>timeout=10<br/>default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS<br/>[operating systems]<br/>multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows XP" /fastdetect<br/>multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="Windows98 SE" /fastdetect<br/><br/>please, suggestions.. Quote</p><blockquote>multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="Windows98 SE" /fastdetect<br/></blockquote> <br/><br/>ROFL<br/><br/>that's funny.<br/><br/>Windows 98SE... supporting both ARC paths AND a fastdetect switch...<br/><br/><br/>anyways...<br/><br/><br/>Windows 98 Does NOT have hal.dll. OR ntoskrnl. why wouldn't it have ntoskrnl? Why, just look at the name, silly. <strong>nt</strong>oskrnl.<br/><br/>In either case, Windows 98 Boots from MSDOS.SYS and IO.SYS (mostly IO.SYS). you'll need to find a bootable windows 98 <a href="https://interviewquestions.tuteehub.com/tag/floppy-2085545" style="font-weight:bold;" target="_blank" title="Click to know more about FLOPPY">FLOPPY</a> and use the "SYS" command on the windows98 drive.<br/><br/>You'll also need to change the ARC path in boot.ini to a drive letter. Since it's on your slave drive I assume D:\:<br/><br/> Quote<blockquote>[boot loader]<br/>timeout=10<br/>default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS<br/>[operating systems]<br/>multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows XP" /fastdetect<br/>D:\="Windows98 SE"<br/></blockquote> what is ROFL ? ok jokes on me.....I can take it<br/><br/>anyway......I had a feeling adding ntoskrnl and hal.dll wasn't appropriate<br/><br/>what <a href="https://interviewquestions.tuteehub.com/tag/exactly-977868" style="font-weight:bold;" target="_blank" title="Click to know more about EXACTLY">EXACTLY</a> do you mean by use the "sys" command?....<br/><br/>nevermind I think I get it <br/><br/><br/><br/>edit: ROFL: rolling on floor laughing <br/><br/>.........that is funny isn't it... <br/><br/><br/></body></html> | |
| 93. |
Solve : Install Win98SE on usb-stick? |
| Answer» <html><body><p>Well, after some time with <a href="https://interviewquestions.tuteehub.com/tag/google-12880" style="font-weight:bold;" target="_blank" title="Click to know more about GOOGLE">GOOGLE</a>, I found this:<br/><br/><a href="http://forum.soft32.com/mac/Direct-support-ftopict26703.html">http://forum.soft32.com/mac/Direct-support-ftopict26703.html</a><br/><br/><br/>According to that page, Virtual PC does support DirectX, but not Direct3D or Hardware 3D<br/><br/>So, it <a href="https://interviewquestions.tuteehub.com/tag/still-653256" style="font-weight:bold;" target="_blank" title="Click to know more about STILL">STILL</a> fails, unless there is a new <a href="https://interviewquestions.tuteehub.com/tag/version-1444891" style="font-weight:bold;" target="_blank" title="Click to know more about VERSION">VERSION</a> that supports Hardware 3D and D3D<br/><br/><br/>Also, the reason why I'm choosing Acronis Boot Selector, is because it has an easy graphic interface, with mouse support and it's inspired by WinXP<br/><br/><a href="http://www.ovsem.net/images/software/os-selector-01b.jpg">Screenshot</a>This is analogous to installing DOS just to play doom...<br/><br/><br/>GTA2, as you <a href="https://interviewquestions.tuteehub.com/tag/said-629244" style="font-weight:bold;" target="_blank" title="Click to know more about SAID">SAID</a>- works fine in XP, and so Does Porsche Unleashed (Porsche 2000).<br/><br/>Really it's more a matter of finding the proper patches, both official and unofficial. Almost any game with a solid following has unofficial patches for new Operating Systems; why, even NFS: High Stakes has a <a href="https://interviewquestions.tuteehub.com/tag/patch-1148821" style="font-weight:bold;" target="_blank" title="Click to know more about PATCH">PATCH</a> that let's it run on Vista when in fact it barely runs properly on XP without changes...</p></body></html> | |
| 94. |
Solve : Windows 98SE CD Key? |
| Answer» <html><body><p>Now i'm curious, which Windows started having unique product keys? Me, 2000?XPNone.Most <a href="https://interviewquestions.tuteehub.com/tag/programs-239435" style="font-weight:bold;" target="_blank" title="Click to know more about PROGRAMS">PROGRAMS</a> don't have unique product keys either.The unique keys are so that the computer can be identified, not the disk the software came on. Quote from: Quantos on June 30, 2009, 06:47:02 PM</p><blockquote>The unique keys are so that the computer can be identified, not the disk the software came on.<br/></blockquote> <br/>not really, it's more a license key then <a href="https://interviewquestions.tuteehub.com/tag/anything-380254" style="font-weight:bold;" target="_blank" title="Click to know more about ANYTHING">ANYTHING</a>. Once you activate a PC with that Key, however, it becomes somewhat tied to the hardware (mostly the network cards MAC address and other <a href="https://interviewquestions.tuteehub.com/tag/tidbits-7718908" style="font-weight:bold;" target="_blank" title="Click to know more about TIDBITS">TIDBITS</a> from the other components). So of course it would be this "<a href="https://interviewquestions.tuteehub.com/tag/activation-848050" style="font-weight:bold;" target="_blank" title="Click to know more about ACTIVATION">ACTIVATION</a> number" that is unique to each PC. One can legally install XP on one machine, activate it, format that drive and install it to another computer; however <a href="https://interviewquestions.tuteehub.com/tag/depending-2572220" style="font-weight:bold;" target="_blank" title="Click to know more about DEPENDING">DEPENDING</a> on the scenario activation might not work without a phone call; basically it "reassociates" the product key with the new machine.</body></html> | |
| 95. |
Solve : Connecting Windows 95 to internet? |
| Answer» <html><body><p>Okay so I am having a very hard time connecting an old windows 95 computer to the internet. I installed the drivers for the network card, but cannot figure out how to get online now. I have it hooked up to a wireless reciever(im not too sure exactly what its called lol I use to use it for my PS2) and it says it cannot go online. It is a fresh install. ANybody have a website or something of the sort that can help me? Thanks!Oh, and by the way, I am using Verizon DSL<a href="http://www.montana.edu/resnet/win9x.php">http://www.montana.edu/resnet/win9x.php</a><br/><br/><a href="https://www.ust.hk/itsc/windows98/network/">http://www.ust.hk/itsc/windows98/network/</a><br/><br/><a href="https://technet.microsoft.com/en-us/library/cc751085.aspx?ppud=4"><strong>And Here...</strong></a>old computers nead to connect to a phone modem for internet wich probbably wont work but im not saying not to try if dosent work eMail me cuz i have a win98 that has he same prob so ill also try<br/>eMail: <a href="/cdn-cgi/l/email-protection">[email protected]</a> Quote from: Kirbopher on June 23, 2009, 10:58:01 AM</p><blockquote>old computers nead to connect to a phone modem for internet <br/></blockquote> <br/> <br/><br/><br/>completely false.Holey Cow ...... Quote from: <a href="https://interviewquestions.tuteehub.com/tag/patio-597311" style="font-weight:bold;" target="_blank" title="Click to know more about PATIO">PATIO</a> on June 23, 2009, 07:27:11 PM<blockquote>Holey Cow ......<br/></blockquote> <br/><br/><br/>?Nice ! A little confused, using the first link. For domain, can it be any website?Install the TCP/IP stalk on your PC.To tell you the truth I tried the same thing with my Windows 95 but it won't go. The problem is your prossesor is to small for the server you are connnected to Wi 95 is no longer compatible to internet Sorry! Quote from: comda on June 29, 2009, 05:28:08 PM<blockquote>To tell you the truth I tried the same thing with my Windows 95 but it won't go. The problem is your prossesor is to small for the server you are connnected to Wi 95 is no longer compatible to internet Sorry!<br/></blockquote> <br/>Also <a href="https://interviewquestions.tuteehub.com/tag/untrue-1439717" style="font-weight:bold;" target="_blank" title="Click to know more about UNTRUE">UNTRUE</a>. it <a href="https://interviewquestions.tuteehub.com/tag/simply-248966" style="font-weight:bold;" target="_blank" title="Click to know more about SIMPLY">SIMPLY</a> needs the TCP/IP protocol installed. (Which I had forgotten about myself)<br/><br/>I've gotten NT 3.51 and Windows 3.11 on the internet so it stands to reason that windows 95 is quite capable of going online. Quote<blockquote>To tell you the truth I tried the same thing with my Windows 95 but it won't go. The problem is your prossesor is to small for the server you are connnected to Wi 95 is no longer compatible to internet Sorry!</blockquote> <br/>I have to agree with BC on that one, my buddy is running a mail server with a 386. The hardware is only an issue when it comes to the software running on it.I got it to work a few days back using the links provided to me. <a href="https://interviewquestions.tuteehub.com/tag/thank-1731949" style="font-weight:bold;" target="_blank" title="Click to know more about THANK">THANK</a> you!</body></html> | |
| 96. |
Solve : Windows 98; Need Help? |
| Answer» <html><body><p>should <a href="https://interviewquestions.tuteehub.com/tag/cmos-409107" style="font-weight:bold;" target="_blank" title="Click to know more about CMOS">CMOS</a> setup be displayed like a DOS screen, or what should it look like? <br/>congratulations bil_drk, you have found CMOS <br/><br/>Yes, it looks like DOS..<br/><br/>Now, once you are in CMOS setup, use the arrow keys on your keyboard to navigate around, generally, pushing the left and right arrow keys allow you to navigate to the different <a href="https://interviewquestions.tuteehub.com/tag/available-888895" style="font-weight:bold;" target="_blank" title="Click to know more about AVAILABLE">AVAILABLE</a> categories.... and the UP/DOWN arrow keys let you select what you want to do in each sub-category... Look in each category and look for something that resembes, Start Order, <a href="https://interviewquestions.tuteehub.com/tag/boot-251147" style="font-weight:bold;" target="_blank" title="Click to know more about BOOT">BOOT</a> Order, Drive Order, Start Sequence, or Boot Sequence.....something along those lines....catch my drift? Once you have found that let me know and I'll guide you through changing the order of the drives..oh, you might have to use the ENTER key on your keyboard to actually enter certain categories to change...In other words, use the arrow keys on your keyboard to navigate through CMOS and use the ENTER key to select objects for editing...The ESC key lets you back out of a category, once entered..<br/><br/><br/><br/><br/>edit: sometimes there are on-screen instructions that <a href="https://interviewquestions.tuteehub.com/tag/tell-1240910" style="font-weight:bold;" target="_blank" title="Click to know more about TELL">TELL</a> you what to do once something is highlighted with the cursor..there is still one problem; my computer shut off after entering CMOS, and now it wont let me back in (i left it to do a few chores), and when i returned, the computer was shut down. i don't know what to do now! , however i can still enter the computer's main setup utility We need to get you back into the CMOS set up if we are going to reinstall Windows..<br/><br/><br/>Make sure all data cables are secured and that the power chord is secured to the wall outlet.... It might do you some good to open up your computer and check for dust...There is a chance that your computer over heated while you were doing chores and that's why it shut down.....Make sure the inside is virtually dust free and that the Heat sink that covers the processor ( the shinny thing on the motherboard with the fan on top of it) is dust free.....Also, make sure all fans are spinning while the computer is on.<br/><br/><br/>If there is dust inside the computer, you'll have to go buy yourself a giant can of compressed air...</p></body></html> | |
| 97. |
Solve : Hard Drive Problem??? |
| Answer» <html><body><p>ive had this computer for a while and im not sure what to do.back a couple years ago,my house was struck by lightning.which about fried all the electronics.my computers hard drive started acting up after that.years go by and i got it to work and then crash and then work again.Currently i turn it on it goes through scandisk finding errors on some sectors,and the hard drive <a href="https://interviewquestions.tuteehub.com/tag/makes-248623" style="font-weight:bold;" target="_blank" title="Click to know more about MAKES">MAKES</a> a grinding noise.it then boots to the login screen but when i try and log in it says windows explorer caused <a href="https://interviewquestions.tuteehub.com/tag/illegal-504452" style="font-weight:bold;" target="_blank" title="Click to know more about ILLEGAL">ILLEGAL</a> operation then i click details and it says invalid page fault.then i click close and it stays on the backround with nothing else.I then have to ctrl-alt-delete to shut it down.I have the system <a href="https://interviewquestions.tuteehub.com/tag/recovery-13760" style="font-weight:bold;" target="_blank" title="Click to know more about RECOVERY">RECOVERY</a> disc somewhere but before i go looking for it,im not sure if system recovery will help.Do you think i should run system recovery or just leave it?DLoad and run the FREE diagnostics from the drive manuf. website to see if the drive is data <a href="https://interviewquestions.tuteehub.com/tag/worthy-7310104" style="font-weight:bold;" target="_blank" title="Click to know more about WORTHY">WORTHY</a>...</p></body></html> | |
| 98. |
Solve : IDE MASTER HARD DRIVE? |
| Answer» <html><body><p>HOW TO FIX, PRIMARY IDE MASTER HARD DRIVE SELF MONITORING SYSTEM HAS REPORTED THAT A PARAMETER HAS EXCEED IT'S NORMAL OPERATING RANGE?Run chkdsk /r on the drive...<br/><br/>If that produces no joy-joy then DLoad and run the <a href="https://interviewquestions.tuteehub.com/tag/free-240724" style="font-weight:bold;" target="_blank" title="Click to know more about FREE">FREE</a> diagnostics from the drive manuf. site...<br/><br/>The drive may be failing and this will let you know.What happens after the error <a href="https://interviewquestions.tuteehub.com/tag/message-25597" style="font-weight:bold;" target="_blank" title="Click to know more about MESSAGE">MESSAGE</a> appears? Does everything appear to be normal?<br/><br/>If everything appears to be normal, you could just disable SMART in your bios and <strong>back up</strong> everything you don't want to loose just in case the drive IS going bad ........and just let it be until/if your system crashes in the future, then just replace the hard drive..<br/><br/>running the chkdsk /r command is still a good idea, either way you slice it<br/>What happens if you disable SMART?It's been reported that SMART is not always accurate in it's HDD failure anticipation. So disabling it will <a href="https://interviewquestions.tuteehub.com/tag/get-11812" style="font-weight:bold;" target="_blank" title="Click to know more about GET">GET</a> rid of the annoying reports that dutchman is describing and SMART will stop monitoring the HDD. However, there is a chance that the HDD could really be on the brink, so backing up data at this point is <strong>crucial</strong><br/><br/>If there is a problem backing up anything it could be due to file system <a href="https://interviewquestions.tuteehub.com/tag/corruption-935841" style="font-weight:bold;" target="_blank" title="Click to know more about CORRUPTION">CORRUPTION</a> and using the chkdsk /r command may help <a href="https://interviewquestions.tuteehub.com/tag/remedy-621934" style="font-weight:bold;" target="_blank" title="Click to know more about REMEDY">REMEDY</a> that, as Patio suggested..<br/><br/></p></body></html> | |
| 99. |
Solve : Issues with downloading on '98? |
| Answer» <html><body><p>Hello. I'm attempting to download a game program onto my computer but i'm having some issues in getting it to open. I'm positive this has nothing to do with the game itself, but with my computer (<a href="https://interviewquestions.tuteehub.com/tag/settings-771535" style="font-weight:bold;" target="_blank" title="Click to know more about SETTINGS">SETTINGS</a>?).<br/><br/>The game downloader file is an .exe which downloads correctly, but once I go to open/run it to begin the actual download it opens up a black window that says "<a href="https://interviewquestions.tuteehub.com/tag/c-3540" style="font-weight:bold;" target="_blank" title="Click to know more about C">C</a>:/command com" at the top. The window then closes within a few seconds of opening and nothing else happens. I get it regardless of where I open it, whether it be on my <a href="https://interviewquestions.tuteehub.com/tag/desktop-949558" style="font-weight:bold;" target="_blank" title="Click to know more about DESKTOP">DESKTOP</a>, winzip, etc. etc. <br/><br/>Any idea how to remedy this? <br/><br/>I'm running on a <a href="https://interviewquestions.tuteehub.com/tag/windows-22662" style="font-weight:bold;" target="_blank" title="Click to know more about WINDOWS">WINDOWS</a> '98 at the moment.What game ?<br/>From where ? ?</p></body></html> | |
| 100. |
Solve : i82801aa Win98SE sound driver?? |
| Answer» <html><body><p>Device is BIOS enabled. Hardware Props. auto-download from MS <a href="https://interviewquestions.tuteehub.com/tag/avails-7664774" style="font-weight:bold;" target="_blank" title="Click to know more about AVAILS">AVAILS</a> nowt.<br/>Have scoured the web inc. Intel & can't find it anywhere!<br/>Can't afford XP which I know does include this driver.<br/>Does anyone know if the <a href="https://interviewquestions.tuteehub.com/tag/dreaded-2062425" style="font-weight:bold;" target="_blank" title="Click to know more about DREADED">DREADED</a> ME has it <a href="https://interviewquestions.tuteehub.com/tag/built-245060" style="font-weight:bold;" target="_blank" title="Click to know more about BUILT">BUILT</a> in?<br/>It's for a Compaq Deskpro <br/>PIII 800Mhz(Coppermine)<br/>i815 Solano chipset<br/>It's a Win98 logoed system and it's an onboard device so I'm sure this driver must exist somewhere!<br/>Could some kind soul <a href="https://interviewquestions.tuteehub.com/tag/please-601513" style="font-weight:bold;" target="_blank" title="Click to know more about PLEASE">PLEASE</a> try and help? I can supply AIDA32 info. further to the above if this helps.<br/><br/>NB A long while ago I found a driver <a href="https://interviewquestions.tuteehub.com/tag/listed-1075620" style="font-weight:bold;" target="_blank" title="Click to know more about LISTED">LISTED</a> as being for this device written by Realtek but it can't have been right because the install BSOD-ed and crashed my system irretreivably.</p></body></html> | |